JBL Reflect Mini NC
Waterproof true wireless Noise Cancelling sport earbuds
Sold from 2020 until now
Getting started with your JBL Reflect Mini NC
Documents & Downloads
Product Specifications
- Driver size (mm)
- 6
- Driver sensitivity at 1kHz/1mW (dB)
- 97
- Impedance (ohms)
- 16
- Number of drivers per ear
- 1
- Dynamic frequency response range (Hz)
- 20 Hz – 20 kHz
- Charging Case Weight (oz)
- 1.6
- Earpiece Weight (oz)
- 0.5
- Charging Case Weight (g)
- 46
- Earpiece Weight (g)
- 13.5
- Bluetooth version
- 5.1
- Bluetooth profiles
- A2DP V1.3, AVRCP V1.6, HFP V1.7
- Bluetooth frequency
- 2.4 GHz – 2.4835 GHz
- Bluetooth transmitted modulation
- GFSK, π/4DQPSK, 8DPSK
- Bluetooth transmitter power
- 0 - 10dbm
- Charging case battery life (max hours)
- 14
- Charging time (hours from empty)
- 2
- Maximum music play time with ANC on (hours)
- 6
- Maximum play time (hours)
- 7
- Built-in Microphone
- Yes
- Hands Free Call
- Yes
- JBL Signature Sound
- Yes
- True Wireless
- Yes
- Active Noise Cancelling
- Yes
- Wireless
- Yes
- Waterproof
- Yes
- Charging case
- Yes
- In-ear
- Yes
- JBL Headphone App
- Yes
- Google Assistant
- Yes
- Alexa
- Yes
- IPX
- IP67
- Rechargable battery
- Yes
Designed for movement, defined by you
Whether you’re into yoga, running or barre, JBL Reflect Mini NC true wireless sport earbuds are the perfect accessory for your athleisure lifestyle. Active Noise Cancelling lets you focus on your fitness goal with zero distractions, while Smart Ambient technology keeps you aware of your surroundings or lets you chat with a friend. Each in-ear connects immediately and independently, so you can take calls with either one and assign unique functions to left and right. With 21 hours of playtime, different reflective color choices and an IPX7 waterproof rating, they're the ultimate true wireless in-ear sport headphones.
FAQs & How-Tos
-
To perform a hardware reset of your earbuds, press and hold the reset button on the charging case* for more than 5 seconds. This resets the earbuds without restoring the settings to the factory defaults.
* Location
Live 300TWS/Live Pro+ TWS: Inside the charging case between the earbuds.
Live Free NC+/Reflect Mini NC TWS/Reflect Aero: On the back of the charging case, next to the USB-C port.
Club Pro+ TWS: On the bottom of the charging case, next to the USB-C port.Was this helpful? Thank you for your feedback! -
The voice assistant you select in the initial set-up (pictured below) will be used as the default assistant on your headphones.
You can change the default assistant in the ‘My JBL Headphones’ app:- Open the My JBL Headphones app on your device.
- Select the headphones you are connected too.
- Go to Settings by clicking the symbol in the top right corner.
- Select Voice Assistant.
- Now you can select your preferred voice assistant.
Your headphones may restart after switching Voice Assistant.Was this helpful? Thank you for your feedback! -
1. Put the earbuds back into the charging case and close the lid. 2. Press and hold the buttons on both the left and right earbuds for more than 2 seconds. Alternatively, only press and hold one of the buttons to just turn off the left or right earbud as required. 3. Use the Auto-off function via the JBL Headphone app (Only applicable for headphones supported in our JBL Headphone app).Was this helpful? Thank you for your feedback!
-
After setting up Amazon Alexa on your headphones through the My JBL Headphones app, use Amazon Alexa by pressing & holding the touch panel for 2 seconds on the earbud that you have enabled the voice assistant feature on.
Things to try- “What’s the weather?”
- Play Niall Horan
- Play NPR on iHeartRadio
- Set a timer for 5 minutes
- What new skills do you have?
While Alexa is talking, press and release the Action button then say “Stop”.
For more information and things to try with Alexa, visit: www.amazon.com/alexadevicesWas this helpful? Thank you for your feedback! -
After setting up Google Assistant on your headphones through the My JBL Headphones app, use Google Assistant by pressing & holding the touch panel for 2 seconds on the earbud that you enabled the voice assistant feature on.
Press and hold the Action button to begin. Requires pairing with eligible phone and internet connection. For examples of questions and things you can do, visit: https://assistant.google.com/platforms/phones/#headphones
Get your notifications
Double-tap the Action button.
Stop your Google Assistant
Touch the Action button.
Reply to the message (where available)
After receiving a message notification, touch and hold the Action button to respond. When you’re done, release the button.
For more information on what your Google Assistant can do, visit: https://assistant.google.com/platforms/headphones
Was this helpful? Thank you for your feedback! -
If the earbuds go into standby mode and turn off, you can still use them without putting them back into the charging case.
You can reactivate the headphones by pressing or touching the outside earbud itself.
Please note: They will be automatically powered off after 30 minutes of being in standby mode if they disconnect from Bluetooth. To reconnect, you will need to put the earbuds back in the charging case and take them off again.
It is possible to change the standby mode time with your headphones. To do this, go into the My JBL Headphones app and choose the Standby Time via Auto-off function. You can adjust the time to 15min, 1hr, etc., or you can choose “Never” if you want to keep the earbuds turn on at all times. Once you set the Auto-off, the earbuds will work according to the setting whether they connect to Bluetooth or disconnect.
Was this helpful? Thank you for your feedback! -
First, ensure that you have the Google Assistant or Amazon Alexa apps installed on your device, depending on the voice assistant you want to use. Go to your app store to download the intended voice assistant app, then add your headphones as a device in the app if necessary. Finally, enable the intended voice assistant in the settings of the My JBL Headphones app and assign which earbud you want to use to control it. The voice assistant app must be open for it to work correctly. It can be opened from within the My JBL Headphones app by tapping the name of the required voice assistant after you have selected it for use and assigned a gesture to one of your earbuds to control it.Was this helpful? Thank you for your feedback!
-
Make sure both headphones are fully charged to ensure that the issue is not due to one of the earbuds lacking power.
Check that the contact points on the headphones and the charging case are clear of dirt, so the issue is not due to the product not being able to charge.
The LED on the headphones will show a blue light when correctly inserted in the charging case.
Try to reset the headphones if the product is fully charged but are still only working in Mono mode.
A reset guide for the headphones can be found here: Reset guide
Was this helpful? Thank you for your feedback!