AVR 1610
425-watt, 5.1-channel, networked AVR with Bluetooth connectivity
Getting started with your AVR 1610
Quick Start Guide
Get up and running in no time with our easy-to-follow Quick Start Guide
Register your product
Do you own this product? Register it here! And claim your warranty or service easily
Register nowDocuments & Downloads
Product Specifications
- Bluetooth
- Multichannel Power (all channels driven)
- 85W per channel, two channels driven @ 6/8 ohms, 20Hz – 20kHz, less than 0.1% THD
- Transient intermodulation distortion (TIM):
- Unmeasurable
- Power Consumption (full power/idle)
- less than 0.5W (standby); 450W maximum
- Stereo Power
- 85W per channel, two channels driven @ 6/8 ohms, 20Hz – 20kHz, less than 0.1% THD
- Input Sensitivity/Impedence
- 250mV/27k ohms
- Signal-to-noise Ratio (IHF-A) (dB)
- 100dB
- Surround system adjacent-channel separation:
- Dolby Pro Logic®/DPLII: 40dB; Dolby Digital: 55dB; DTS®: 55dB
- Frequency Response
- 10Hz – 130kHz (+0dB/–3dB)
- Slew Rate
- 40V/sec
- Frequency Range (MHz)
- 87.5MHz – 108.0MHz
- Usable Sensitivity (IHF)
- 1.3µV/13.2dBf
- Signal-to-Noise Ratio (Mono/Stereo dB)
- 70dB/68dB
- Distortion (Mono/Stereo)
- 0.2%/0.3%
- Stereo Separation @ 1kHz (dB)
- 40dB
- Selectivity (±400kHz):
- 70dB
- Frequency Range (kHz)
- 520kHz – 1610kHz
- Signal-to-Noise Ratio (dB)
- 38dB
- Usable Sensitivity (Loop)
- 425µV
- Distortion (1kHz, 50% mod):
- 1.0%
- Selectivity (±10kHz):
- 30dB
- Input Level/Impedence (ohm)
- 1Vp-p/75 ohms
- Output Level/Impedence (ohm)
- 1Vp-p/75 ohms
- Width (in)
- 17-5/16
- Width (mm)
- 440
- Height (in)
- 4-3/4
- Height (mm)
- 121
- Depth (in)
- 11-13/16
- Depth (mm)
- 300
- Weight (lb)
- 10
- Weight(kg)
- 4.6
- China
- -
- Image Rejection (dB)
- 80dB
- IF Rejection (dB)
- 80dB
- Television Format
- NTSC
- Video Frequency Response (Composite/S-Video)
- 10Hz – 8MHz (–3dB)
- Power Requirement
- 120V AC / 60Hz
This 425-watt, high-performance, 5.1-channel A/V receiver gives you more ways to connect!
There are countless ways to access and store your favorite media, from external hard drives to set-top cable boxes to smartphones. But if your home audio/video receiver doesn’t give you options for connecting to those media, it’s borderline useless. The Harman Kardon® AVR 1610 gives you a simple way to connect to everything you love. This 425-watt, 5.1-channel, networked audio/video receiver is loaded with options that let you access your media. It features five 3D-ready HDMI® inputs, including one compatible with MHL, so you’ll have more than enough ways to access content on your HD cable box, Blu-ray™ player, MHL-equipped portable devices or Roku Streaming Stick™ dongle. It also includes DLNA® 1.5 networking and HARMAN TrueStream Bluetooth® technology so you can stream high-fidelity audio from your mobile devices. Regarding sound, the AVR 1610 features our exclusive Natural Sound Processing (NSP), which creates a rich, enveloping sound from any source – particularly with two-channel streaming content. And to get the very best sound based on your speakers and listening environment, its new EZSet/EQ™ III process automatically calibrates the system. And with HARMAN GreenEdge™ technology, the AVR 1610 is environmentally friendly, too.
The AVR 1610 high-performance audio/video receiver pumps out 85 watts per channel to power a full five-channel, networked surround-sound system. It can also connect to a powered subwoofer to provide enhanced low-frequency performance for all your entertainment. While the amplifier retains the time-tested Harman Kardon high-current capacity (HCC), ultrawide-bandwidth amplifier design to ensure the most accurate, dynamic sound with enhanced clarity and realism, even at the highest listening levels, a digitally based power supply gives the amplifiers all the wattage they need without the weight of traditional power-supply designs and their heavy transformers. The net result is a great-sounding AVR in a small form that is friendly to the environment.
The AVR 1610 can stream audio from virtually any portable device. You can connect and charge Apple devices such as an iPad, iPhone or iPod touch directly to the front-panel USB jack and play back without the need for an external adapter. For other tablets, smartphones and laptops, you can take advantage of the AVR 1610’s integrated HARMAN TrueStream Bluetooth technology. The AVR is also DLNA 1.5 compliant, which gives you more options for delivering content over your home network.
The HARMAN TrueStream certification ensures the best possible listening experience when you stream audio wirelessly via Bluetooth technology. HARMAN TrueStream tech delivers the most current, most advanced wireless-option to ensure the highest-quality sound, no matter what application or source device you use.
The AVR 1610 features vTuner Internet radio to connect you to a whole world of online audio entertainment. As soon as it’s out of the box, you can stream over-the-air radio stations from around the globe as well as stream from a wide range of Internet-only radio stations.
Five HDMI inputs with 3D and 30/36-bit Deep Color deliver high-definition digital video at resolutions up to 1080p with full-fidelity audio through a single cable. There is no loss of video or audio quality because of format conversion, just full-impact Hollywood excitement as its creators meant you to experience it.
The AVR 1610 gives you multiple options for audio playback with its front-panel USB port. Simply connect an iPhone, iPad, iPod or USB stick to play your stored tracks through your home entertainment system.
Whether it’s captured by your camera, phone or tablet, or streamed from a Roku Streaming Stick dongle, you can deliver high-definition audio/video content directly to your HDTV via the AVR 1610’s MHL connection.
The AVR 1610 delivers high-resolution audio that matches the digital video quality of Blu-ray Disc™ formats, unlocking the full potential of movie soundtracks formatted with Dolby® TrueHD and DTS-HD Master Audio™ decoding. No matter what mode or mood you are in, you’ll always hear audio playback at its finest.
The new HARMAN EzSet/EQ III auto-calibration process precisely adjusts the AVR 1610’s volume levels, speaker distance/delay time settings and equalization to optimize audio performance automatically for your specific speaker system and room conditions. The system features an easy-to-follow menu display and includes a plug-in calibration microphone.
The HARMAN GreenEdge logo assures you that the AVR 1610’s design is environmentally friendly without compromising the premium performance for which HARMAN products are known. Thanks to an advanced power supply, the AVR 1610 can deliver high-quality audio in a smaller, lighter chassis that uses less metal and plastic. The smaller design means that less fuel is used in transportation, with the end result being a lower carbon footprint.
The AVR 1610 takes the award-winning Harman Kardon design look to a new level with a flush volume control and more compact design. Thanks to the light weight made possible by an advanced digital power supply, the unit weighs less without sacrificing performance so that it is the perfect match for the thin glass shelves of today’s open TV/entertainment furniture.
All connections on the AVR 1610 are color-coded to simplify hookup and reduce errors. Color-coded binding-post speaker terminals on all output channels accept banana plugs (North America only), pin connectors or bare wire to provide secure links for your speaker cables.
The AVR 1610 simplifies your life with a programmable infrared (IR) remote control. It works seamlessly with the receiver’s multilingual on-screen display, guiding you through system setup and operation with consummate ease. The multidevice remote can also control your TV, cable boxes, satellite tuners and other playback sources. For further installation flexibility, there is a 12-volt trigger output and a remote IR sensor input.
Taking control to the next level, the Harman Kardon Remote app is available from the iTunes App Store for iOS® devices and the Google Play™ service for compatible Android™ products. It will let you use your compatible smartphone or tablet to drive the AVR 1610 without picking up the remote.
FAQs & How-Tos
2 results
-
HDCP (High Definition Copy Protection) 2.2 will become mandatory for 4K/UHD content only. First source should be the 4K BD player announced at IFA for spring 2016 from Samsung. In case of HDCP 2.2, the whole chain needs to be compatible to work from source to AVR to TV. If one of the devices in the chain is not HDCP 2.2-compliant, the player will downscale the content to 1080p. No black screen. This is the theory, anyway. HDCP 2.2 is copy-protection, so it does not decode the signal, but is concerned with preserving the content from being copied and distributed on the internet. The problem of HDCP 2.2 is that it is hardware-based, and not software-based, so there is nothing we can do on our existing models, like any other AVR manufacturer or TV. Please note that self-produced 4K material is no problem, since self-produced material has no digital HDCP copy protection. Only streamed material and UHD-Blu-ray will not work, since the HDCP protection will stop the signal in the receiver.Was this helpful? Thank you for your feedback!
-
All AVR models up to and including 151S, 161S and 171S feature HDCP version 1.4. (High-bandwidth Digital Content Protection). This is also true for BDS 280, 580, 280S and 580S. It is not possible to update to version 2.2 with any software/firmware update, as this requires a hardware change. Future models may feature version 2.2, made for UHD/4k content.Was this helpful? Thank you for your feedback!
Images & Videos
Can’t find what you’re looking for?
Message Us
Chat with a support agent via Whatsapp at:
91 70658 44446
Mon - Sun: 10:00 am - 7:00 pm (IST)