AVR 7550HD
Audio/Video Receiver With Dolby TrueHD & DTS-HD Master Audio & HDMI 1.3 (110 watts x 7)
Sold from 2009 until 2011
Successor Product: | AVR 3650 |
---|---|
Made in: | China |
Documents & Downloads
Product Specifications
- Power Requirements
- 120V AC/60Hz
- Power Consumption
- 120W Idle, 1,405W Max. (7 channels driven)
- Digital Inputs (coaxial/optical)
- 4/4 on rear; 1 (switchable to output)/1 on front
- Analog Inputs
- 3 component inputs
- Analog Inputs
- 3 composite inputs
- Analog Inputs
- 3 S-video inputs
- Analog Inputs
- 5 audio inputs
- Analog Inputs
- 6/8 channel audio input
- On-Screen Display
- Yes, with component video and HDMI outputs
- Multizone Capability
- Audio and video; A-BUSREADY; RS-232 serial control port; surround back channels assignable to remote zone; Zone II remote
- Auto Setup
- EzSet/EQ II room equalization
- Remote Control
- Programmable, learning seven-device main remote control
- Shipping Weight (System, Accessories, Packing)
- 51 lb (23.3kg)
- MSRP U.S.
- $2999.95 each
- # of Amplifier Channels
- 7
- Continuous Average Power (FTC) per Channel (stereo mode)
- 110 Watts (2 channels driven) @ <0.07% THD, 20Hz – 20kHz, both channels driven into 8 ohms
- Front L & R Channels
- 110 Watts (2 channels driven) @ <0.07% THD, 20Hz – 20kHz into 8 ohms
- Center Channel
- 110 Watts @ <0.07% THD, 20Hz – 20kHz into 8 ohms
- Surround Channels (L & R Side, L & R Back)
- 110 Watts (2 channels driven) @ <0.07% THD, 20Hz – 20kHz into 8 ohms
- Input Level/Impedance
- 200mV/47k ohms - Linear (High-Level)
- Signal-to-Noise Ratio
- 100dB (IHF-A)
- Frequency Response
- 10Hz – 130kHz (+0/-3dB @ 1 watt)
- Surround System Adjacent Channel Separation:
- Dolby Pro Logic I/II/IIx
- 40dB
- Dolby Digital
- 55dB
- DTS
- 55dB
- Transient Intermodulation Distortion (TIM)
- Unmeasurable
- Slew Rate
- 40V/µSec
- Width
- 17-5/16 inch (440mm)
- Height
- 6-1/2 inch (165mm)
- Depth
- 17-1/16 inch (435mm)
- Weight
- 44 lb (20kg)
- Dimensions:
- Carton Dimensions (H x W x D)
- 11 inch x 20-1/2 inch x 22-13/16 inch (280mm x 520mm x 580mm)
- Television Format
- NTSC
- Input Level/Impedance
- 1Vp-p/75 ohms
- Output Level/Impedance
- 1V/75 ohms
- Composite and S-Video
- 10Hz – 8MHz (–3dB)
- Component Video
- 10Hz – 100MHz (–3dB)
- HDMI
- Version 1.3a with 10-bit Deep Color
- Frequency Range
- AM... 520 – 1710kHz
- Frequency Range
- FM... 87.5 – 108.0MHz
- Signal-to-Noise Ratio
- AM... 45dB
- Usable Sensitivity
- FM... IHF 1.3µV/13.2dBf
- Signal-to-Noise Ratio
- FM... Mono/Stereo 70dB/68dB
- Usable Sensitivity
- AM... Loop 500µV
- Distortion
- AM... 1kHz, 50% Mod. 0.8%
- Distortion
- FM... Mono/Stereo 0.2%/0.3%
- Selectivity
- AM... ± 10kHz, 30dB
- Stereo Separation
- FM... 40dB @ 1kHz
- Selectivity
- FM... ± 400kHz, 70dB
- Image Rejection
- FM... 80dB
- IF Rejection
- FM... 90dB
- Amplifier Power (RMS)
- 110W (2 channels driven) @ 8 ohms (20Hz – 20kHz, <0.07% THD)
Harman Kardon® A/V receivers are renowned for their power, performance and ease of use, and the AVR 7550HD will only enhance that reputation. Among the fi rst receivers to offer Dolby Volume technology, which automatically adjusts volume levels when switching between sources and channels, the AVR 7550HD delivers 110 watts of power to each of the seven channels, plus two subwoofer outputs. It accepts a universe of inputs, including HDMI, component, S-video, USB and broadband Internet, as well as The Bridge II docking station (included) for iPod A/V playback, control and charging. Every Dolby and DTS® technology is here, as is Faroudja DCDi Cinema and our exclusive Logic 7 processing. Zone II remote, Zone II OSD and A-BUS® technologies work together to greatly simplify multiroom A/V applications.
Images & Videos
Can’t find what you’re looking for?
Call us
To speak to our customer service specialist
1800-102-0525
Mon to Sun 10 AM to 7 PM IST