AVR 154

AVR 154

Audio/Video Receiver With Dolby Digital & DTS & HDMI Switching (40 watts x 2 | 30 watts x 5)

Sold from 2008 until 2009

Predecessor Product: AVR 147
Successor Product: AVR 1565
Made in: China

Documents & Downloads

Product Specifications

Audio Section
Continuous Average Power (FTC)
(stereo mode)
40 watts per channel into 8 ohms @ 20Hz – 20kHz
Dimensions (H x W x D) and weight
6-1/2" x 17-5/16" x 15" (165mm x 440mm x 382mm), 20.5 lb (9.3kg)
Power Requirements
AC 120V/60Hz
Power Consumption
65W idle, 540W maximum (5 channels driven)
Digital Inputs (coaxial/optical)
2/2 on rear; 1/1 on front
HDMI
Three inputs/1 output, switching only.
Analog Inputs
1 A/V on front panel
Analog Inputs
1 audio-only mini-jack
Analog Inputs
2 audio-only
Analog Inputs
3 A/V on rear panel
Analog Inputs
6-channel input
Analog Inputs
tuner
On-Screen Display
Yes
Multizone Capability
No
Auto Setup
No
Remote Control
Eleven-device, programmable remote
Shipping Weight (System, Accessories, Packing)
25.3 lb (11.5kg)
MSRP U.S.
$399.95 each
# of Amplifier Channels
5
Continuous Average Power (FTC) per Channel (stereo mode)
40 Watts per channel, 20Hz – 20kHz, @ <0.07% THD, both channels driven into 8 ohms
Front L & R Channels
30 Watts per channel @ <0.07% THD, 20Hz – 20kHz into 8 ohms
Center Channel
30 Watts @ <0.07% THD, 20Hz – 20kHz into 8 ohms
Surround Channels
30 Watts per channel @ <0.07% THD, 20Hz – 20kHz into 8 ohms
Input Level/Impedance
200mV/47k ohms - Linear (High-Level)
Signal-to-Noise Ratio
100dB (IHF-A)
Surround System Adjacent Channel Separation:
Dolby Pro Logic I and II
40dB
Dolby Digital
55dB
DTS
55dB
Frequency Response
10Hz – 130kHz (+0/-3dB @ 1 watt)
Transient Intermodulation Distortion (TIM)
Unmeasurable
Slew Rate
40V/µsec
Width
17-5/16 inch (440mm)
Height
6-1/2 inch (165mm)
Depth
15 inch (382mm)
Weight
20.5 lb (9.3kg)
Dimensions:
Carton Dimensions (W x H x D)
22 inch x 10-1/2 inch x 18-3/4 inch (559mm x 267mm x 476mm)
Television Format
NTSC
Input Level/Impedance
1V p-p/75 ohms
Output Level/Impedance
1V/75 ohms
Video Frequency Response:
Composite and S-Video
10Hz – 8MHz (–3dB)
Component Video
10Hz – 100MHz (–3dB)
HDMI
Switching
Frequency Range
AM... 520 – 1720kHz
Frequency Range
FM... 87.5 – 108.0MHz
Signal-to-Noise Ratio
AM... 45dB
Usable Sensitivity
FM... IHF 1.3µV/13.2dBf
Signal-to-Noise Ratio
FM... Mono/Stereo 70/68dB
Usable Sensitivity
AM... Loop 500µV
Distortion
AM... 1kHz, 50% Mod 0.8%
Distortion
FM... Mono/Stereo 0.2/0.3%
Selectivity
AM... ± 10kHz, 30dB
Stereo Separation
FM... 40dB @ 1kHz
Selectivity
FM... ± 400kHz, 70dB
Image Rejection
FM... 80dB
IF Rejection
FM... 90dB
Amplifier Power (RMS)
30 x 5 @ 8 ohms (20Hz – 20kHz, <0.07% THD) (all channels driven at full power)
High Instantaneous Current Capability (HCC)
± 25 Amps

The Harman Kardon AVR 154 is all about getting connected. It features three HDMI; inputs, two wide-bandwidth HDTV-ready component video inputs, four S-video inputs, a front-panel input for video games, an auxiliary input for portable media players, and a portfolio of advanced surround processing technologies, including Dolby Digital, DTS and Logic 7 processing. But the AVR 154 is also about ease of use, and it features a high-current, ultrawide-bandwidth design for maximum fidelity.

Can’t find what you’re looking for?

Call us

Call us

To speak to our customer service specialist

1800-102-0525

Mon to Sun 10 AM to 7 PM IST

message

Message Us

Chat with a support agent via Whatsapp at:
91 70658 44446

Mon - Sun: 10:00 am - 7:00 pm (IST)