Support Overview / Home Audio / Receivers / Receivers - Surround Sound / AVR 347

AVR 347

Audio/Video Receiver With Dolby Digital, DTS & HDMI Switching (70 watts x 2 | 55 watts x 7)

Sold from 2007 until 2008

Predecessor Product:	AVR 340
Made in:	China

Documents & Downloads

Quick Start Guide

Quick Start Guide (English) 3.23 MB

Other

Packaging and Accessories (English) 496.06 KB

Product Specifications

General Specifications

Power Requirements: AC 120V/60Hz

Power Consumption: 65W idle, 540W maximum (7 channels driven)

Digital Inputs (coaxial/optical): 3/3 on rear; 1/1 on front

HDMI: Two inputs/1 output, with audio and video processing. Simplay HD verified.

Analog Inputs: 1 A/V on front panel

Analog Inputs: 2 audio-only

Analog Inputs: 4 A/V on rear panel

Analog Inputs: 6-/8-channel input

Analog Inputs: The Bridge/DMP

Analog Inputs: tuner

On-Screen Display: Yes, with component video

Multizone Capability: Audio; A-BUSREADY; surround back channels assignable to remote zone; ZoneII remote

Auto Setup: EzSet/EQ room equalization

Remote Control: Eleven-device, programmable remote

Shipping Weight (System, Accessories, Packing): 35.6 lb (16.2kg)

MSRP U.S.: $899.95 each

Audio Specifications

# of Amplifier Channels: 7

Continuous Average Power (FTC) per Channel (stereo mode): 70 Watts per channel, 20Hz – 20kHz, @ <0.07% THD, both channels driven into 8 ohms

Front L & R Channels: 55 Watts per channel @ <0.07% THD, 20Hz – 20kHz into 8 ohms

Center Channel: 55 Watts @ <0.07% THD, 20Hz – 20kHz into 8 ohms

Surround Channels (L & R Side, L & R Back): 55 Watts per channel @ <0.07% THD, 20Hz – 20kHz into 8 ohms

Input Level/Impedance: 200mV/47k ohms - Linear (High-Level)

Signal-to-Noise Ratio: 100dB (IHF-A)

Surround System Adjacent Channel Separation:

Dolby Pro Logic I and II: 40dB

Dolby Digital: 55dB

DTS: 55dB

Frequency Response: 10Hz – 130kHz (+0/-3dB @ 1 watt)

High Instantaneous Current Capability (HCC): ± 25 Amps

Transient Intermodulation Distortion (TIM): Unmeasurable

Slew Rate: 40V/µsec

Dimensions

Width: 17-5/16 inch (440mm)

Height: 6-5/8 inch (165mm)

Depth: 15 inch (382mm)

Weight: 30.6 lb (13.9kg)

Dimensions:

Carton Dimensions (W x H x D): 22 inch x 10-1/2 inch x 18-1/4 inch (559mm x 267mm x 464mm)

Video Specifications

Television Format: NTSC

Input Level/Impedance: 1V p-p/75 ohms

Output Level/Impedance: 1V/75 ohms

Video Frequency Response:

Composite and S-Video: 10Hz – 8MHz (–3dB)

Component Video: 10Hz – 100MHz (–3dB)

HDMI: Audio and video processing

Tuner Specifications

Frequency Range: AM... 520 – 1720kHz

Frequency Range: FM... 87.5 – 108.0MHz

Signal-to-Noise Ratio: AM... 45dB

Usable Sensitivity: FM... IHF 1.3µV/13.2dBf

Signal-to-Noise Ratio: FM... Mono/Stereo 70/68dB

Usable Sensitivity: AM... Loop 500µV

Distortion: AM... 1kHz, 50% Mod 0.8%

Distortion: FM... Mono/Stereo 0.2/0.3%

Selectivity: AM... ± 10kHz, 30dB

Stereo Separation: FM... 40dB @ 1kHz

Selectivity: FM... ± 400kHz, 70dB

Image Rejection: FM... 80dB

IF Rejection: FM... 90dB

Amplifier Specifications

Amplifier Power (RMS): 55 x 7 @ 8 ohms (20Hz – 20kHz, <0.07% THD) (all channels driven at full power)

Picture this! The AVR 347 not only includes a host of powerful features such as DCDi by Faroudja video processing, Simplay HD;-verified HDMI; 1.1 connectivity with full audio processing and EzSet/EQ; technology - it uses a colorful user interface to make system setup and operation easier than ever. Add full multiroom capability with A-BUS connectivity and you have pure Harman Kardon sound everywhere in the house. Bridge II is compatible with this model.