AVR 354

AVR 354

Audio/Video Receiver With Dolby TrueHD and DTS-HD Master Audio, HDMI 1.3A & 1080p Upscaling (75 watts x 7)

Sold from 2008 until 2009

Successor Product: AVR 3600
Made in: China

Documents & Downloads

Product Specifications

Power Requirements
AC 120V/60Hz
Power Consumption
118W idle, 890W maximum (7 channels driven)
Digital Inputs (coaxial/optical)
2/3 on rear; 1/1 on front
HDMI
Three inputs/1 output, with audio and video processing. Version 1.3a with 10-bit Deep Color.
Analog Inputs
1 A/V on front panel
Analog Inputs
2 audio-only
Analog Inputs
3 A/V on rear panel
Analog Inputs
6-/8-channel input
Analog Inputs
The Bridge II
Analog Inputs
tuner
On-Screen Display
Yes
Multizone Capability
Audio; surround back channels assignable to remote zone; ZoneII remote
Auto Setup
EzSet/EQ room equalization
Remote Control
Seven-device, programmable learning remote
Shipping Weight (System, Accessories, Packing)
36.7 lb (16.7kg)
MSRP U.S.
$899.95 each
# of Amplifier Channels
7
Continuous Average Power (FTC) per Channel (stereo mode)
75 Watts per channel, 20Hz – 20kHz, @ <0.07% THD, both channels driven into 8 ohms
Front L & R Channels
75 Watts per channel @ <0.07% THD, 20Hz – 20kHz into 8 ohms
Center Channel
75 Watts @ <0.07% THD, 20Hz – 20kHz into 8 ohms
Surround Channels (L & R Side, L & R Back)
75 Watts per channel @ <0.07% THD, 20Hz – 20kHz into 8 ohms
Input Level/Impedance
200mV/47k ohms - Linear (High-Level)
Signal-to-Noise Ratio
100dB (IHF-A)
Surround System Adjacent Channel Separation:
Dolby Pro Logic I and II
40dB
Dolby Digital
55dB
DTS
55dB
Frequency Response
10Hz – 130kHz (+0/-3dB @ 1 watt)
Transient Intermodulation Distortion (TIM)
Unmeasurable
Slew Rate
40V/µsec
Width
17-5/16 inch (440mm)
Height
6-1/2 inch (165mm)
Depth
15 inch (382mm)
Weight
31.5 lb (14.3kg)
Dimensions:
Carton Dimensions (W x H x D)
21-7/8 inch x 10-1/2 inch x 18-5/16 inch (555mm x 266mm x 465mm)
Television Format
NTSC
Input Level/Impedance
1Vp-p/75 ohms
Output Level/Impedance
1V/75 ohms
Video Frequency Response:
Composite and S-Video
10Hz – 8MHz (–3dB)
Component Video
10Hz – 100MHz (–3dB)
HDMI
Version 1.3a with 10-bit Deep Color
Frequency Range
AM... 520 – 1720kHz
Frequency Range
FM... 87.5 – 108.0MHz
Signal-to-Noise Ratio
AM... 45dB
Usable Sensitivity
FM... IHF 1.3µV/13.2dBf
Signal-to-Noise Ratio
FM... Mono/Stereo 70/68dB
Usable Sensitivity
AM... Loop 500µV
Distortion
AM... 1kHz, 50% Mod 0.8%
Distortion
FM... Mono/Stereo 0.2/0.3%
Selectivity
AM... ± 10kHz, 30dB
Stereo Separation
FM... 40dB @ 1kHz
Selectivity
FM... ± 400kHz, 70dB
Image Rejection
FM... 80dB
IF Rejection
FM... 90dB
Amplifier Power (RMS)
75 x 7 @ 8 ohms (20Hz – 20kHz, <0.07% THD) (all channels driven at full power)
High Instantaneous Current Capability (HCC)
± 35 Amps

The AVR 354 includes a full complement of Dolby and DTS decoding technologies, HDMI; repeater capability, Faroudja DCDi Cinema processing, EzSet/EQ; equalization and multiroom capability. It connects to a universe of digital and analog sources, as well as to external amps. And with The Bridge II docking station (included), it will even play, control and charge your iPod. To ensure that everything works together seamlessly, the AVR 354 features a full-color graphical user interface and an eight-device programmable remote. Harman Kardon founder Dr. Sidney Harman has always believed technology should serve users, not intimidate them. The AVR 354 is a perfect case in point.

Can’t find what you’re looking for?

Call us

Call us

To speak to our customer service specialist

1800-102-0525

Mon to Sun 10 AM to 7 PM IST

message

Message Us

Chat with a support agent via Whatsapp at:
91 70658 44446

Mon - Sun: 10:00 am - 7:00 pm (IST)