How To

Support Overview / How To

How To

1413 results
  • UA React Headphones: TalkThru Technology Information
    TalkThru Technology allows you to clearly hear others for quick conversations without removing your UA React headphones. To activate TalkThru mode, press the Bionic Hearing button on the controller once. You will hear a tone, and your music level will lower when TalkThru Technology is engaged. To revert back to normal volume, simply press the Bionic Hearing button again.
  • UA React Headphones: Volume Control Information
    You will be able to control the volume by pressing the volume + and volume- buttons located on the controller.
  • UA React Headphones: Waterproof Information
    Yes. The UA React features an IPX7 rating which offers full protection from sweat and water. They can be fully submerged for up to 30 minutes.
  • UA Sport Flex Headphones: Battery Life
    The headphones feature a Speed Charge battery which allows you to receive a full hour of playback time after only charging the headphones for 5 minutes. To receive the full 12 hours of audio playback, it typically takes 1.5 hours of charging time.
  • UA Sport Flex Headphones: Pairing Information
    Press and hold the circle power button for 3-5 seconds. This will be located on the LEFT arm of the neckband. We recommend having one or both ear tips in your ear to listen to the audio commands. Continue to press and hold until you hear the audible voice stating, “powering on.” If this is your first time powering on the headphones it will automatically go into pairing mode in which you will hear the audio voice prompt stating “looking for device”. Make sure that the device you are attempting to connect to is in the Bluetooth search mode and within range. UA | JBL Flex should appear on your device within 3-8 seconds. Once you choose this option on your discoverable devices, it will connect and the voice prompt will state “Connected. “ To power off the headphones, press and hold the circle power button for 2-3 seconds or until you hear the audible voice state, “Powering Off”
  • UA Sport Flex Headphones: Track Information
    To skip the track forward, press and hold the volume up button. (+) If you want to skip backward, press and hold the volume down (-) The volume buttons are located on the RIGHT arm of the neckband.
  • UA Sport Wireless" Battery Information
    The device is charged by a standard micro USB charger. To charge the unit, gently pull out the rubber cover just below the light indicator on the left side of the inline mic. You will see the the charging cable end.
  • UA Train Headphones: Call Information
    To receive a call, press the center button located in between the volume- and volume+ button for 1 second.
  • UA Train Headphones: Charging Information
    To use the headphones, they cannot be charging. You should receive 16 hours of battery life. The UA Train also features the quick charge battery which allows you to receive 1 hour of battery life after charging for 5 min.
  • UA Train Headphones: Ear Pad Information
    Yes, The UA Train ear cushions can be removed and washed. To remove the ear cushions, peel cushion away from ear cup center. Hand wash the ear cushions only with liquid soap for 5 minutes. Swish in soapy water, then swish through clean water until there are no more soap suds. Wait for ear cushions to fully dry, and gently stretch the cushion, inserting the cushion ring into the ear cup slot, and working your way around. Rotate until the L or R indicator is in the correct position.
  • UA Train Headphones: TalkThru Technology
    Talk Thru technology allows you to clearly hear others for quick conversations without removing your UA Train headphones. To activate TalkThru mode, press the UA logo on the RIGHT ear for 1 second. You will hear your music level lower when TalkThru Technology is engaged. To revert back to normal volume, simply press the UA logo again. (Please note TalkThru does not function when using cable connection.)
  • Unit does not power up when power button is pressed?
    Press and hold the power button for 3-5 seconds, it will power on/off the TRIP. Short press on the power button will lock and unlock top capacities touch buttons on the TRIP. Be sure to hold the button for 3-5 seconds to ensure you are powering on/off and not controlling the touch buttons.
  • Upgrading the software on your PartyBoost or Connect+ Speaker

    Software updates for your speaker can be done using the JBL Portable app.
    Download it from the Apple App store and Google Play store.
    If there is an available update, look for the small red dot above the gear icon and follow the download instructions (see image below).
    If you have an issue with your device it is always worth checking if there is a Software update available and performing the installation if there is.

  • USB connection with Quantum Duo and headphones
    Please avoid the use of USB splitters and extenders built into screens etc. Dropouts in sound and lack of signal from the microphone in headsets may be the result. If possible, always connect directly to the computer, or use a single extension cord.
  • Using a wireless subwoofer
    It is possible to connect a wireless Citation Sub or Sub S to the Citation Amp.
  • Using HDMI, Optical and Coaxial digital inputs
    The TV input is a single audio input with different options for connectors. If an HDMI cable is connected, then it will always be prioritized. Optical and coaxial digital will be prioritized by first signal present (Be aware, that some optical outputs will register as signal always)
    It is not possible to change between the digital inputs for TV source via the remote control. 
  • Using InfinityLAB Charger outdoor or in wet environment
    The InfinityLAB charger is not designed for wet environment.
    It is not waterproof, if it gets wet, there's a chance for short-circuit, which can cause damage to other electronics that you plug into them.
    Ensure that you keep your charger always dry.
  • Using InfinityLab Power bank as a carry-on item during flights
    Normally, batteries under 100Wh (Watt-hour) can be carried on the plane during flights.
    InfinityLab 5.000 power bank is 18.65Wh (Watt-hour), and the 10.000 power bank is 38.5Wh (Watt-hour), which should be allowed as a carry-on item.

    We advise you to consult the flight company if you are in doubt before using it as a carry-on item.
     
  • Using InfinityLab power bank under cold environments
    The InfinityLab power bank will have lower charging efficiency under cold or freezing environments (below 5 degrees Celcius). Therefore, you will feel it’s charging slowly.

    However, when you return to normal temperature (below 35 degrees Celsius), the InfinityLab power bank’s charging efficiency will be back to normal.
  • Using my receiver, the picture on my TV is slightly out of sync with the audio. What's wrong?
    This receiver has a feature called "A/V Sync Delay" that allows you to manually set dissimilar video and audio synchronization that may occur with certain types of Plasma and HDTV's. The instruction for this setting can be found in your owner's manual in the section "Delay Adjustments" or "Delay Settings".
  • Using other exchangeable plugs for your InfinityLAB charger
    No, you should only use the InfinityLAB US, UK and EU swappable plugs included in the packaging box.
  • Using other USB Cables with our InfinityLab devices
    Yes, you can charge your devices with common USB-A and USB-C cables.
  • Using Quantum DUO with our QuantumENGINE software
    Unfortunately, our JBL Quantum DUO speakers are not supported by our QuantumENGINE PC software.
    All configuration is done on the speakers itself, and there is no need or required software to change the RGB lights.
  • Using speakers with 4 ohm impedance
    The Citation Amp can work with 4 ohm speakers and is rated at 200-watts per channel. Do not connect speakers less than 4 ohm!
  • Using the Quantum headset while charging

    JBL is committed to providing the most optimal consumer experience through superior immersive audio. Our Quantum 800/600 headsets are designed to be connected via 2.4Ghz, BT ( 800 only ) or 3.5mm jack. USB-C port is only designed for charging the internal 14hr battery and does not provide an audio connection. This is an intentional design decision.
     

  • Using the Trigger out 12V connection
    You can use a 3.5 mini-jack cable to connect the Citation Amp (TRIGGER OUT 12V) with your subwoofer or other equipment to have them power on when the Citation Amp wakes from standby.
    When the Citation Amp is ON, there will be output 12V DC signal, and when the Citation Amp is OFF  mode, there is no output (0V DC).
  • Using the USB Connection
    The USB port is only for charging the JBL Quantum 350 Wireless.
    Connect the dongle to use the 2.4GHz wireless connection.
  • Using Voice assistant on your Mark Levinson No. 5909 Headphone
    To use your source device’s voice assistant (Smartphone, tablet, etc.), HOLD the No 5909 multi-function button (right ear-cup).
     
  • Voice Assistant Headphone Connection
    If you are having trouble pairing your headphones or if your device is asking for a PIN, please make sure to check all available BT connections in your device's settings. Verify that you are connecting to the headphone's product name that excludes 'LE'. The 'LE' connection is only intended for voice assistant feature compatible with your headphones. If the voice assistant feature has not yet been configured, this would explain why the 'LE' connection appears as an available connection, but cannot be used for Bluetooth audio.

    https://harman.widen.net/s/dtsldx6jxx/bluetooth-pairing-issue-with-voice-assistant-headphone-le-image1 
  • Voice Assist Information
    To activate the voice assistance, press and hold the center button on the RIGHT ear for 2 seconds until you hear your music stop. You will be able to speak to VA through your headphones and it should comply with your command.
     
  • Voice commands that I registered are not triggering Smartbase.
    • Voice commands only work when receiving a call. • Excessive background noise such as wind or music, could be impacting unit’s effectiveness. Close windows and or reduce the volume of your music and try again.
  • Voice control
    Even though the Google Assistant is not built-in, Harman Kardon Radiance 2400 is compatible with a voice-assistant speaker, like the Harman Kardon Citation Series.
  • Warranty: Personalized Products
    Yes, we stand 100% behind the quality and performance of our products. If you encounter a problem with a Personalized Product, please contact our Customer Support team so that we can verify the issue and warranty coverage.
  • Waterproof Information
    This product does not feature an IPX rating and is not waterproof. Over exposure to water or moisture can result in irreversible damage to this unit.
  • Waterproof Information (IPX7)

    This unit is IPX7 rated, which means that you can submerge the unit in water as deep as 3 feet (1 meter) for up to 30 minutes.

    IPX7-icon.png
  • WAVE/VIBE BEAM 2: Software Update Release Notes

    WAVE/VIBE BEAM 2

    Software Update Release Notes

    ------------------------------------------------------------------------

    Version:  3.9.0

    Release Date: April 8th, 2025

    Release Media: OTA (over the air) Automatic Update through JBL Headphone App

     

    What’s New

    1. Fixed BT disconnect issue with mobile devices with specific characters in BT name

     

  • What's in the box
    Your JBL Quantum 100 includes the headset, a detachable microphone, QSG l Warranty Card l Warning Card, and a microphone windshield.
  • What's in the box?
    Your JBL Quantum Stream includes the following:
    1 x JBL Quantum Stream microphone
    1 x USB power cable
    1 x Warranty / Warning (W / !)
    1 x Quick Start Guide / Safety Sheet (S / i)
  • What's in the box? 

    Your JBL Quantum 200 includes the headset, a PC audio splitter, QSG l Warranty Card l Warning Card, and a microphone windshield.

  • What activities does Vi help you train for?
    Vi currently includes support for indoor/outdoor Walking, Jogging, Running, Sprinting, HIIT Runs and Cycling. Our supported activities will continue expanding every few months.
  • What are the benefits of having the soundbar connected to WiFi?
    You are able to enjoy wireless streaming via Chromecast and Airplay from your devices. This will also give you the opportunity to do multi-room playback. At the same time, the product will be able to automatically update, when there is software improvements available.
  • What are the components of the JBL CLUB series incredible sound?
    Besides Legendary JBL Pro Sound and hi-res audio support available in the whole series; however, the JBL CLUB ONE headphone is equipped with 40mm Graphene orange drivers. Compensating the loss between the original signal and what you hear, the driver provides a fuller, more organic sound experience. On all models, you can adjust the audio reproduction to your preferences with the equalizer in the My JBL Headphones app.
     
  • What are the details for HDCP 2.2?
    HDCP (High Definition Copy Protection) 2.2 will become mandatory for 4K/UHD content only. First source should be the 4K BD player announced at IFA for spring 2016 from Samsung. In case of HDCP 2.2, the whole chain needs to be compatible to work from source to AVR to TV. If one of the devices in the chain is not HDCP 2.2-compliant, the player will downscale the content to 1080p. No black screen. This is the theory, anyway. HDCP 2.2 is copy-protection, so it does not decode the signal, but is concerned with preserving the content from being copied and distributed on the internet. The problem of HDCP 2.2 is that it is hardware-based, and not software-based, so there is nothing we can do on our existing models, like any other AVR manufacturer or TV. Please note that self-produced 4K material is no problem, since self-produced material has no digital HDCP copy protection. Only streamed material and UHD-Blu-ray will not work, since the HDCP protection will stop the signal in the receiver.
  • What are the differences between BAR 2.1 and BAR 2.1 Deep-Bass
    In case you wonder what the differences are between JBL BAR 2.1 and JBL BAR 2.1 Deep Bass, the newest model, then keep reading to find out more!
    Our JBL BAR 2.1 Deep Bass is an improvement to the BAR 2.1.

    Here is what you will get extra:
    1. Improved sound quality.
    2. Deeper and richer bass.
    3. A new modern design change.
    It may not be compelling enough for you to buy it or upgrade your device. However, if you are upgrading, then adding the JBL BAR 2.1 Deep Bass won't disappoint you at all!
  • What are the differences between Partyboost and Connect+
    Our newest products, such has JBL Pulse 4 and JBL Flip 5, feature a new technology called Partyboost .

    Partyboost technology
    • Improved Bluetooth connection between speakers.
    • A more powerful Bluetooth transmitter means that the speakers can be farther apart.
    • Partyboost can only connect to other Partyboost speakers.
    All newer Portable products from JBL will have Partyboost integrated.
    Unfortunately, this feature is not backwards compatible with  previous models that have JBL Connect or Connect+.
     
  • What are the differences between the FLIP 5 and FLIP Essential?
    You can see the differences between the features and specifications of the FLIP 5 and FLIP Essential below:
    Features
    FeaturesFlip 5Flip Essential
    IPX7 WaterproofYesYes
    Aux InputNoYes
    Auto Power OffYesYes
    BluetoothYesYes
    SpeakerphoneNoNo
    Voice Assistant IntegrationNoNo
    Charging CableYesYes
    USB-C ChargingYesNo
    Micro USB ChargingNoYes
    PartyBoost ConnectivityYesNo
    JBL Portable App CompatibilityYesNo
    Social ModeYesNo
    Racetrack Shaped DriverYesNo
    Available Colours111

    *As the FLIP Essential is not compatible with the JBL Portable app:
    It is not possible to connect multiple speakers, rename the speaker or turn off audio feedback sounds (for on/off/bluetooth pairing/connected).
    If you require these functions, we recommend the Flip 5.

    Specifications
    SpecificationsFlip 5Flip Essential
    Music Playing Time (Hours)1210
    Output Power (W)20W RMS2 x 8W RMS
    Battery Capacity (mAh)48003000
    Charging Time (Hours)2.53.5
    Dimensions (cm)18.1 x 6.9 x 7.416.9 x 6.4 x 6.4
    Dimensions (in)7.1 x 2.7 x 2.96.7 x 2.5 x 2.5
    Weight (kgs)0.540.47
    Weight (lbs)1.191.0
     
    Both speakers offer lots of features and excellent sound. FLIP Essential is cheaper than FLIP 5. It all comes down to what type of features you prefer, such as a long-lasting battery or maybe an affordable price for a good companion!

    No matter which product you choose, you won't be disappointed with JBL Legendary sound signature and features!

    Still in doubt?
    Ask our specialist for more information and feedback.
  • What are the differences between x35 models and x85S models?
    BDS 335/635 are our low cost models, still offering the thrills of a media center with Blu Ray disc player built-in. These systems have passive subwoofers, and the subwoofer amplifier is built in to the BDS unit. The x85S models offer more features, such as Spotify Connect support, and the use of active subwoofers. All depends on your needs and what your personal preferences will be.
  • What are the holes at each end of the Boost used for?
    These are the bass ports. Please do not place the Boost TV with its ends too close to obstacles, since that will reduce bass output. Allow at least 5-10cm free space at each end.
  • What are the improvements from the previous generation of Citation Bar?
    Compared to the Citation Bar, the Citation Multibeam 1100 adds Dolby Atmos with up-firing drivers, Multibeam surround sound, Sound Calibration and PureVoice dialogue enhancement. 
     
  • What are the key differences between the Bar 2.1 and 3.1?
    The JBL Bar 2.1 has a 6.5" subwoofer, whereas the Bar 3.1 has a 10" subwoofer. The Bar 3.1 has two additional HDMI inputs, support 4K, and has a dedicated tweeter and two woofers to function as the center channel. These added features makes the JBL Bar 3.1 more efficient at producing bass, connecting multiple sources, playing Ultra HD content, and listening to voice/vocals.
  • What are the leather-like patches in the HKTS 335 or 635 meant for?
    They are meant as protective pads for the satellite speakers to stand on, preventing damage and scratches.
  • What are the requirements for using Harman Kardon Allure speaker?
    There are a couple of things that you will need to install your Harman Kardon Allure speaker. 1. Amazon account (US, UK or Germany are the only ones supported now). 2. An Android device (Android 6.x and up) or Apple device (iOS 9.3 and up). 3. A Wi-Fi network with UPnP enabled. 4. Our HK Alexa setup app from the App store. If you have met all the criteria for installing your new Harman Kardon Allure speaker, then you are ready to enjoy a voice-activated speaker and great music!
  • What are the sound modes on the JBL Bar Studio, Bar 2.1, Bar 3.1, and Bar 5.1?
    There are 5 sound modes: - Standard - Movie - Music - Voice - Sports Out the box, "Standard" sound mode is the default setting. The display on the soundbar's front panel will show which mode you are in (excluding the Bar Studio) Dotted LED lights on the side of the JBL Studio indicates when sound more your are in, the patterns are as follows: - Standard: One LED dot - Movie: Two LED dots - Music: Three LED dots - Voice: Four LED dots - Sports: Five LED dots
  • What are the two openings at the back of the Soundgear used for?
    These are bass tuning canals, used to provide full sound.
  • What are the two signal cables that are in the SOHO II NC box meant for? One has silver-colored plug, the other one has black-colored plug.
    The silver cable is intended for use with Apple sources. The black cable is intended for use with Android/universal sources.
  • What audio codec does the JBL Dive Support?
    The Endurance Dive supports SBC. But the main signal transfer is A2DP, v1.3.
  • What audio codecs are supported for LINK 10, 20, 300 and 500?
    Codecs such as MP3, AAC-LC, HE+ACC, FLAC, Vorbis, Wav, CELT/opus are supported via Wi-Fi streaming. For Bluetooth, codecs such as SBC and AAC are supported.
  • What can I do with the Amazon Alexa app for my Harman Kardon Allure/portable speaker?
    There are tons of features that you can use with your Harman Kardon Allure spaeker and Alexa app. We advise going to Amazon's own webpage for more assistance with the Alexa app and what you can do with it. https://www.amazon.com/gp/help/customer/display.html?nodeId=201602230
  • What can I do with the Connect app?
    It is possible to rename the Bluetooth name of the primary connected device and set the Party or Stereo mode. If a firmware upgrade is available for any Connect, Connect+, or Partyboost compatible speaker, this can be installed through the JBL Portable app. Only identical products can be set to stereo mode. Please note that, even though you can pair a Boost TV with JBL Connect, you cannot control this from the JBL Connect App
  • What can I do with the JBL Tour Pro 2 Smart Case?

    The JBL Tour Pro 2 allows you to find your preferred control method in any scenario. When you want to control your headphones, you no longer need to take your phone out, open the JBL Headphones app and wait for the headphones to connect in the app. All features are accessible directly on the Smart Case, where you can easily select any key feature, you know from the app.

    Some of the features you can access on the Smart Case includes playing and pausing your music, skip to the next/previous track, volume adjustment, answer/reject calls, customize the EQ settings, Spatial audio, ANC and Ambient Sound Control, timer & clock, receive notifications, screensavers, and a battery indicator. 

< 1 ... 18 19 20 21 22 ... 24 >

Can’t find what you’re looking for?

Call us

Call us

To speak to our customer service specialist

1800-102-0525

Mon to Sun 10 AM to 7 PM IST

message

Message Us

Chat with a support agent via Whatsapp at:
91 70658 44446

Mon - Sun: 10:00 am - 7:00 pm (IST)