How To

Support Overview / How To

How To

1413 results
  • Does JBL Quantum ONE provide mic monitoring (side tone) feature?
    Yes. You can configure the volume of the mic monitoring in JBL QuantumENGINE. The default setting of the mic monitoring is "OFF”.
  • Does JBL QuantumENGINE support x86 CPUs?
    No, the JBL QuantumENGINE only supports x64 CPU Architectures.
  • Does JBL QuantumENGINE software require internet connection to function?
    The JBL QuantumENGINE can run without internet connection, but it needs connection to download and install the software or firmware upgrades.
  • Does JBL QuantumENGINE also support 32 bit Windows?
    No, the JBL QuantumENGINE only supports 64 bit Windows.
  • Does it matter if my game output is 5.1 or 7.1?
    There’s potentially more detail and spatial resolution in a 7.1 channel setup—and the more detail, the better the experience. However, JBL QuantumSURROUND will still work well with 5.1 output.
  • Does it have phantom power for microphones?
    Yes, EON 208P has a selector switch where you can turn phantom power on/off when needed for condenser microphones on CH1 and CH2.
  • Does it have phantom power for microphones?
    No, there is no phantom power in the microphone inputs.
    All power to active microphones must be supplied from an external source.
  • Does Harman Volume on SB20 have more than one level?
    Yes, there are three settings: high, low and off.
  • Does Harman Kardon Allure support phone calls using the Alexa app?
    No, this feature is not yet embedded into our Harman Kardon Allure speaker. Future updates might include this feature, therefore keep an eye on the release notes in our HK Alexa setup app.
  • Does Focus 500/700 feature volume control?
    Yes, the Focus 500/700 features a 3 button mic that features, pause/play, track and volume control.
  • Does Control Xstream have Spotify Connect?
    Yes, Control Xstream supports Spotify Connect, which can be used from the Spotify app if you have a premium account.
  • Does Boost TV Support AptX Codec?
    No, we only support SBC Codec and AAC Codec.
  • Does Adapt stream music to my speakers?
    The Adapt connects to an active speaker or amplifier via the 3.5mm Audio Out jack. It acts a receiving point for Wi-Fi audio streams, upgrading existing audio equipment to work in the Harman Kardon Wireless HD Audio System.
  • Does a Bluetooth signal wake up the Aura?
    Yes, no matter if Aura is in Sleep mode or Standby mode, an incoming Bluetooth signal will wake it up.
  • Display Timeout and Standby Times
    The display will timeout and switch off automatically after 30 seconds if no buttons are pressed to preserve battery life, but pressing any button will wake the display again. It is not possible to change or switch off the automatic display timeout.

    The speaker itself will turn off automatically after 15 minutes inactive, if no music is playing on any mode or button are pressed (not possible to change).
  • Discover how to troubleshoot when your Google Assistant device isn’t responding to “Hey Google” or “Ok Google”.
  • Differences between a traditional loudspeaker system and the Radiance speaker with CBT
    Harman Kardon Radiance 2400 uses patented Constant Beamwidth Technology (CBT) with 24 drivers to create an all-new listening experience. Typical loudspeakers have very narrow sound dispersion in the mid-range and high frequencies, making a very narrow sweet spot for one listener. On the other hand, CBT delivers room-filling sound dispersion and a resulting wide sweet spot, so everyone in the room has great listening experience. The use of CBT allowed us to reduce the cabinet size dramatically. This resulted in a very sleek loudspeaker that does not compromise on sound but looks even better when compared to bulky wooden floor-standing speakers in combination with large AV components.
  • Deezer shows an error message when I open it in the HK Controller app.
    If you encounter an "Internal error 300" error message when using Deezer from inside our HK Controller app, we advise you to log out of your account and log in again, still in the Controller app. The error message is a communication error between speaker and Deezer server. If you still encounter this after you have logged in again, please consult our helpdesk.
  • Constant Beamwidth Technology™
    Developed for HARMAN Professional Solutions, this technology ensures every listener in the room enjoys the same exhilarating sound experience via precisely-tuned beam-forming components. HARMAN’s revolutionary technology uniquely unites 24 precisely calibrated 1.25” transducers in each of the elegant Radiance speakers to deliver the same superior sound coverage from corner to corner. 
  • Connection issues using PartyBoost or Connect+

    If there are drop out or connection issues when using PartyBoost or Connect+, it could be one of three things.

    1.      Units are too far apart (move units closer together) 

    2.      Interference from other 2.4gHz wireless units in the area.

    3.     Unit is no longer working as designed

    Here are some steps to isolate the issue:

     Try taking the units out of the house and test it outside with no interference to see if you still experience connectivity issues. If you still experience connectivity issues, please try steps below:

    Whatever unit drops off, remove that from the chain. Test the rest of the speakers and keep doing it until you find the speaker that is causing the drop outs.  If all speakers begin to drop off, please try a different order and repeat. Repeat this process with each unit being the “main speaker”. 

     Make sure to turn off all WiFi/RF devices. (Router, laptop, baby monitor, Nest cams, IP cams, WiFi switches, WiFi outlets, WiFi lights, cordless phones, etc.) 

    You should be able to identify the issue/speaker by following these steps. 

  • Connecting to your Car
    It is very simple to connect to your Car with the JBL Partybox 200 or 300. Use the included cable that connects through the cigarette connector in your Car and power on the Partybox! Please note that the 12V connection does not charge the battery in the Partybox 300 - it will only power the Partybox when in use. To charge the battery, it will have to be plugged into AC power ( 110 - 230V )
  • Connecting the remote control
    If the remote control stopped working, please check if the batteries are drained. If so, replace them with new ones.

    The remote control may have failed to connect with the digital hub. On the touchscreen, tap “Options” > “Remote Control”, then follow the onscreen instructions to pair with the digital hub again.
  • Connecting a turntable
    It is possible to connect a turntable to the AUX input of the Radiance 2400. Depending on the turntables output specifications, a phono-preamplifier will in most cases be necessary to connect in-between.
  • Connecting any subwoofer to the ADAPT+ sub-out port
    The ADAPT+ is made to connect an external subwoofer. The subwoofer needs to be an active device, which means that it must have its own, built-in amplifier.
  • Connecting ADAPT to the analog output of my BDS, delay occurs between OMNI sound and BDS speaker sound. How come?
    The BDS 235 and 535 owner's manual states that you need an ADAPT to make your system wireless. You do it by connecting the BDS system's analog outputs to the ADAPT's analog AUX input. The ADAPT will then re-stream to your OMNI speakers wirelessly. However, if you listen to the OMNI speakers, and want to listen to the music directly from the BDS system at the same time, there will be a delay in the sound from the OMNI speakers. The BDS speakers will play the music first, and since the ADAPT needs to process the data wirelessly, a delay results. To avoid delay, please mute the BDS system, or connect from the ADAPT line-out to the BDS AUX in instead of the other way around. With this setup, you can only play to the BDS from an OMNI speaker, which will not be delayed in sound.
  • Connect Feature Information
    This product is not supported by Connect + or Partyboost on the JBL Portable app. They cannot connect to other portable speakers wirelessly.
  • Compatibility List
    It can fast charge almost anything with a USB-A or USB-C cable—phones, earbuds, power banks, cameras, even your laptop or gaming console.
  • Cleaning Instructions for Re-establishing Charging
    It is not uncommon to have charging problems with True Wireless headphones. You may encounter that charging stops, does not start at all or that one of the ear buds suddenly switches on and begins the pairing process. This is almost always caused by dirt on the metal charging contacts. These contacts are vulnerable because they can easily be contaminated by sweat, skin grease, or ear wax. They are usually gold plated, but gold plating does not prevent surface dirt.

    If you have charging problems, the first step is to always clean all contact points, on each earbud and on the charging case.
    You will need: cotton cloth or makeup swab, cotton swabs and rubbing alcohol. Also a pencil with eraser for further cleaning.
    needed-tools.png
    Use a cotton swab with some rubbing alcohol to clean the charging terminals of the headphones. Rotate the swab and scrub lightly on each contact surface, then use a cotton cloth to remove any dust and cotton residue left on the headphones. It is important to perform this process periodically to keep your headphones clean, thus avoiding affecting the charging speed/quality.
    cleaning-earbud-contact-points.png
    Wipe the contact pins in the charging case with a clean cotton swab. The swab can be slightly moistened with rubbing alcohol, but it is important that the interior is completely dry before closing the box. Use the cotton cloth and wait for it to dry.
    cleaning-charging-case.png
    Repeat until the contact points are visibly clean, and charging should work as designed.

    Try cleaning the contacts with the tip of a pencil and the eraser at the end of the pencil, the graphite and rubber can help to re-establish charging also.
    This procedure can be performed on all TWS earphones and cases.
  • Cleaning - how is this done?
    The ear-tips can be removed and washed in luke-warm water with a little dish soap. Do not put the headphone into water, it may dried of with a moist cloth. If cloth and a little water doesn't clean sufficiently, use the cleaning-tool which has a brush and scraper to do the job properly
  • CITATION SERIES: WiSA Technology & Compatibility

    General information about WiSA:

    WiSA is a wireless system designed specifically for audio and speakers. An audio system that incorporates WiSA technology has it's own internal wireless system. It is capable of doing 96kHz/24bit audio with an audio latency of only 5ms, virtually undetectable by the human ear.

    For more information on WiSA technology, please go to the official WiSA website.

    If a product is WiSA Certified, it can be used with any other WiSA certified product. For example a WiSA Ready TV with at transmitter.
    Note: The overall sound quality is dependent on the processing and setup in the WiSA TV & transmitter, and may result in a performance (EQ, crossover and levels) not intended by the speaker manufacturer. To be sure that the Citation products sound the best, use a Citation Bar product as the main "hub".


    Current WiSA Certified products:

    Citation Surrounds
    Citation Sub
    Citation Sub S
    Citation Towers


    Current products making use of WiSA technology:

    Citation Bar
    Citation Multibeam 700
    HK surround


    Limitations:

    WiSA does not offer 3D audio formats like Dolby Atmos, and DTS:X yet, so at the moment it is limited to 5.1 or 7.1 Dolby Digital. So regardless of which brand of WiSA speaker you choose, Dolby Atmos will not be available yet.
< 1 ... 37 38 39 40 41 ... 48 >

Can’t find what you’re looking for?

Call us

Call us

To speak to our customer service specialist

1800-102-0525

Mon to Sun 10 AM to 7 PM IST

message

Message Us

Chat with a support agent via Whatsapp at:
91 70658 44446

Mon - Sun: 10:00 am - 7:00 pm (IST)