How To

Support Overview / How To

How To

435 results

Sort

Page size

What you need to get started with your device
Getting started with the checklist
- A JBL LINK device(s).
- Latest version of the Google Home app installed on your mobile device.
- Latest version of the Google app (Android only) installed on your mobile device.
- A Google Account (you can create one online via Google).
- A mobile device with either iOS or Android support.
  - Must have iOS 10 or higher
  - Must have Android 5.0 and higher
  - There is no support for PC set up.
- An internet connection from your local ISP (Internet Service Provider).
- Your Wireless Network must secured with WPA2 Encryption (Enterprise mode NOT supported).
- Availability and performance of certain features, services and applications are device- and network-dependent and may not be available in all areas; subscription(s) may be required, and additional terms, conditions and/or charges may apply.
Wi-Fi requirement
- Wi-Fi routers must have Encryption enabled to install JBL LINK speakers (WPA2 etc).
- Wi-Fi Extenders need to feature support of Multicast forwarding and UPnP.
- Always use 5 GHz Wi-Fi for best performance and less interference.
- For routers that have 2.4G Wi-Fi support only, make sure that they are using channels 1, 6 or 11 only.
You can now install your JBL LINK speaker to your Wireless Network and you can find our setup article that shows how to install your LINK product.
Was this helpful? Thank you for your feedback!
What type of connectors are used on the AKG K550 MKIII?

The connector between headphones and cable is Mini-XLR with lock mechanism. The connector that goes into sources is a combination plug, 3.5mm jack with 6.3mm adapter.

Was this helpful? Thank you for your feedback!
What to do if the TWS headphones only work in Mono mode?

Make sure both headphones are fully charged to ensure that the issue is not due to one of the earbuds lacking power.

Check that the contact points on the headphones and the charging case are clear of dirt, so the issue is not due to the product not being able to charge.

The LED on the headphones will show a blue light when correctly inserted in the charging case.

Try to reset the headphones if the product is fully charged but are still only working in Mono mode.

A reset guide for the headphones can be found here: Reset guide

Was this helpful? Thank you for your feedback!
What to do if Spatial Audio is not working?
If you are not able to turn Spatial Audio on and the option is greyed out on the JBL Smart Tx, then you need to do the following.
- Open the JBL Headphones app
- Disable High-Resolution Audio (LDAC)
- The headphones will turn off and reboot
- You can enable Spatial Audio after the reboot
Was this helpful? Thank you for your feedback!
What should I expect after turning on JBL QuantumSURROUND?

The first thing you’ll notice is that sound no longer feels like it’s “inside your head.” Suddenly it seems like the game audio is coming from high-quality loudspeakers—or the virtual game world—all around you.

It’s a different experience than you get with other headphones, and may take a little while to adjust to. For example, sounds coming from sources in the distance will seem farther away, as they would in real life. Even though you might be used to those sounds feeling closer with other headphones, JBL QuantumSURROUND provides hyper-accurate spatialization that can give you a competitive edge.

So spend some time dialing in the EQ to your liking, and see how real-world hearing helps you pinpoint enemies and bring the game to life.

Was this helpful? Thank you for your feedback!
What settings should I use to get the most out of JBL QuantumSURROUND?

Different games have different settings, but as a general rule, make sure that your game outputs multi-channel unprocessed audio. We recommend 7.1 surround, but 5.1 works too. Always disable any other processing (like DTS and Dolby).

Was this helpful? Thank you for your feedback!
What router should i get, to have the best performance for my OMNI+ system?

To have the best possible performance for OMNI+ system we advise to have a dual-band router with a powerful chipset and ram for best Wi-Fi performance. This will not only help our products to perform better and more stable, but your other devices at home will have more power and fewer interruptions. Please also be sure that your home Wi-Fi router has Multicast enabled, as our Omni+ system requires this feature enabled in order to work (same goes for Chromecast devices). Always connect our Omni+ system to 5 GHz Wi-Fi whenever possible to limit the risk of devices being slow or interrupted on 2.4GHz Wi-Fi.

Was this helpful? Thank you for your feedback!
What platforms can I use with my JBL Quantum ONE headset?

The JBL Quantum ONE headset is compatible via 3.5mm jack with PC, PlayStation, Xbox, Nintendo Switch, Mobile, Mac and VR. You can use the USB connection with PC.

Was this helpful? Thank you for your feedback!
What languages are supported by JBL QuantumENGINE?

The JBL QuantumENGINE supports up to 20 languages. You can select the preferred language in the system section.

Was this helpful? Thank you for your feedback!
What is Window Sonic Spatial Surround Sound?

Windows Sonic is a virtual surround algorithm that is built into Windows 10 PCs. You can read more here:
https://docs.microsoft.com/en-us/windows/win32/coreaudio/spatial-sound

Was this helpful? Thank you for your feedback!
What is the requirement for the JBL Everest GA series?
These are the supported languages for the Everest GA series.
- English (US, UK, CA, IN, AU)
- German
- French (CA, FR)
- Japanese
- Portuguese (BR)
More will be added in future Google releases.
Was this helpful? Thank you for your feedback!
What is the rated power of the OMNI BAR+ system?

Both the OMNI BAR+ and its subwoofer have 200W of power amplification, which means that total system power is 400 W.

Was this helpful? Thank you for your feedback!