Cleaning Instructions for Re-establishing Charging
Cleaning Instructions for Re-establishing Charging
It is not uncommon to have charging problems with True Wireless headphones. You may encounter that charging stops, does not start at all or that one of the ear buds suddenly switches on and begins the pairing process. This is almost always caused by dirt on the metal charging contacts. These contacts are vulnerable because they can easily be contaminated by sweat, skin grease, or ear wax. They are usually gold plated, but gold plating does not prevent surface dirt.
If you have charging problems, the first step is to always clean all contact points, on each earbud and on the charging case.
You will need: cotton cloth or makeup swab, cotton swabs and rubbing alcohol. Also a pencil with eraser for further cleaning.
Use a cotton swab with some rubbing alcohol to clean the charging terminals of the headphones. Rotate the swab and scrub lightly on each contact surface, then use a cotton cloth to remove any dust and cotton residue left on the headphones. It is important to perform this process periodically to keep your headphones clean, thus avoiding affecting the charging speed/quality.
Wipe the contact pins in the charging case with a clean cotton swab. The swab can be slightly moistened with rubbing alcohol, but it is important that the interior is completely dry before closing the box. Use the cotton cloth and wait for it to dry.
Repeat until the contact points are visibly clean, and charging should work as designed.
Try cleaning the contacts with the tip of a pencil and the eraser at the end of the pencil, the graphite and rubber can help to re-establish charging also.
This procedure can be performed on all TWS earphones and cases.
If you have charging problems, the first step is to always clean all contact points, on each earbud and on the charging case.
You will need: cotton cloth or makeup swab, cotton swabs and rubbing alcohol. Also a pencil with eraser for further cleaning.
Use a cotton swab with some rubbing alcohol to clean the charging terminals of the headphones. Rotate the swab and scrub lightly on each contact surface, then use a cotton cloth to remove any dust and cotton residue left on the headphones. It is important to perform this process periodically to keep your headphones clean, thus avoiding affecting the charging speed/quality.
Wipe the contact pins in the charging case with a clean cotton swab. The swab can be slightly moistened with rubbing alcohol, but it is important that the interior is completely dry before closing the box. Use the cotton cloth and wait for it to dry.
Repeat until the contact points are visibly clean, and charging should work as designed.
Try cleaning the contacts with the tip of a pencil and the eraser at the end of the pencil, the graphite and rubber can help to re-establish charging also.
This procedure can be performed on all TWS earphones and cases.
Applies to:
- JBL Tune Buds
- JBL Tune 220TWS
- JBL Live Free NC+ TWS
- JBL Tune 130NC TWS
- JBL Tune 115TWS
- JBL Tune 125TWS
- JBL Wave 200TWS
- JBL Reflect Flow
- JBL Live 300TWS
- JBL Endurance Race TWS
- JBL Club Pro+ TWS
- JBL Wave 100TWS
- JBL Endurance PEAK
- JBL Endurance Peak II
- JBL Tune 215TWS
- JBL Tune 120TWS
- JBL Reflect Flow Pro
- JBL Wave 300TWS
- JBL Live Pro+ TWS
- JBL Free II
- JBL Free X
- JBL Tune 230NC TWS
- JBL Tune 225TWS
- JBL Wave Beam
- JBL Wave Buds
- JBL Wave Flex
- JBL Vibe Beam
- JBL Vibe Buds
- JBL Vibe Flex
- JBL Tune Flex
- JBL Tune Flex Ghost Edition
- JBL Live Buds 3
- JBL Tour Pro 3
- JBL Endurance Race 2
- JBL Live Beam 3
- JBL Wave Flex 2
- JBL Wave Beam 2
- JBL Wave Buds 2
- JBL Tune Beam 2
- JBL Tune Buds 2
- JBL Tune Flex 2
Category:
Troubleshooting
Was this helpful?
Thank you for your feedback!
Can’t find what you’re looking for?
Call us
To speak to our customer service specialist
1800-102-0525
Mon to Sun 10 AM to 7 PM IST