SDA-8300
8-channel Bridgeable Class D Amplifier
Documents & Downloads
Product Specifications
- Cooling
- Continuously variable speed forced air, front to back airflow
- Maximum Fan Noise (dBA SPL @ 1M)
- 47
- Required AC Mains (±10%)
- 100Vrms - 240Vrms ~50/60Hz
- Rated Output Power Into 8 Ohms
- 300W
- Rated Output Power Into 4 Ohms
- 300W
- Rated Output Power Into 2 Ohms
- 150W
- Bridged Output Power Into 8 Ohms
- 600W
- High Impedance
- 70-Volt & 100-Volt Capable
- Frequency Response (8Ω, 20Hz - 20kHz)
- ±0.25dB
- Analog Input Signal to Noise Ratio
- 104 dB
- BLU link Input Signal to Noise Ratio (A-Weighted)
- >108dB
- Total Harmonic Distortion (at full rated power, 20Hz - 20kHz)
- 0.35%
- Damping Factor (20Hz to100Hz)
- >1000
- Input Impedance (nominal balanced, unbalanced)
- 10kΩ, 5kΩ
- Maximum Input Level before Compression (Low Gain Mode)
- (+)20dB
- Load Impedance Stereo/Dual Mode
- 2Ω - 16Ω; 70Vrms and 100Vrms
- Load Impedance Bridge Mono
- 4Ω - 16Ω; 140Vrms and 200Vrms
- Width
- 19 in. (48.3 cm)
- Height
- 3.5 in. (8.9 cm)
- Depth
- 14.25 in. ( 35.63 cm)
- Weight
- 23.5lbs (10.66kg)
- Eight balanced line inputs
- 6-pin block connectors (Two channels per block connector)
- Eight speaker level outputs
- Terminal strip (accepts up to 10AWG wire)
- BLU link Input/Output
- RJ-45 (Category 5e)
- Ethernet
- RJ-45 (Category 5e)
- Programmable General Purpose Input/Output Ports
- " 3-pin block connector (Enables SLEEP mode and monitoring of AMP STATUS)"
- Power Connector
- 15A IEC
- Frequency Response
- +/-0.25db
- Signal-to-Noise Ratio
- >108db
- Total Harmonic Distortion (THD)
- <0.35%
- Power Requirements (+/-10%)
- 100VAC – 240VAC 50/60hz
SDA 8300
The SDA-8300 is a versatile 8-channel Class D power amplifier designed to deliver maximum power while taking up minimal rack space. Each channel is rated to deliver 300W into 8 ohms and adjacent channel pairs can be bridged to deliver 600W into 8 ohms. This flexible channel configuration makes this an ideal amplifier to power LCR, surround, and height channel loudspeakers as well as in-wall subwoofers in JBL Synthesis immersive audio systems. Powerful built-in DSP allows for custom loudspeaker tuning and full external control allows for complete and easy system integration.
Images & Videos
Can’t find what you’re looking for?
Call us
To speak to our customer service specialist
1800-102-0525
Mon to Sun 10 AM to 7 PM IST