JBL Control X Wireless
Powerful, expandable wireless stereo Bluetooth® speakers for home or on-the go
Sold from 2016 until now
Getting started with your JBL Control X Wireless
Documents & Downloads
Product Specifications
- Finish
- Graphite / White / Red
- Rated Power
- 30W per channel RMS (AC mode)
- Signal-to-noise ratio
- >75 dB
- Power supply
- AC 100-240 VAC, 50-60Hz
- Battery Type
- Lithium-ion Polymer (7.4V, 2600mAh)
- Battery Charge Time
- 2.4 hours @ 0.5C
- Playback Time
- Up to 4 hours (varies by volume level and audio content)
- Bluetooth® Transmitter Power
- 0-4 dBm
- Bluetooth® Transmitter Frequency Range
- 2.402 – 2.480 GHz
- Bluetooth® Transmission Range
- Up to 10m (from source)
- Speaker Range
- Up to 30m (between primary and secondary speakers)
- Dimensions
- 9-1/4" x 6-1/2" x 6-1/4" (235mm x 165mm x 159mm)
- Frequency Response
- 62Hz - 20kHz (-6db)
- Weight (kg)
- 2.95 kg
- Weight (lb)
- 6.5 lbs
- High-Frequency Transducer
- 1" (25mm) CMMD® Lite dome tweeter
Rock the house inside and out
Take your favorite music, movies, TV shows, or games to the next level with the award-winning JBL Control X Wireless speakers. This portable Bluetooth® speaker pair outputs immersive stereo sound without any wires or cables between each speaker. These compact speakers were designed to provide mind-blowing power and performance to any room in your home. And when it’s time to take the party outside, the rugged design is well-equipped to handle any gathering or event. If you require a wider soundstage, simply add an additional pair of Control X Wireless speakers (sold separately) for simultaneous playback on up to 4 speakers.
FAQs & How-Tos
-
No. Although the Control X Wireless have a rugged exterior and are portable, they are not all-weather speakers. Any direct exposure to harsh weather condition (rain, snow, extreme hot/cold temperatures) will damage the speakers.Was this helpful? Thank you for your feedback!
-
No, you can only have one activate device connected to the speaker. Please un-pair your current Bluetooth device, then connect with another device if needed.Was this helpful? Thank you for your feedback!
-
Yes, that’s the best part about this speaker, there are so many options. Besides streaming over Wi-Fi, the JBL Control Xstream also offers a Bluetooth connection and an AUX inputWas this helpful? Thank you for your feedback!
-
No, the connection between our Control XT wireless speakers are established through Wi-Fi connection, running on 2.4 GHz network. The only time you will use Bluetooth, is when you connect to the primary speaker and start streaming music.Was this helpful? Thank you for your feedback!
-
Look at the back of the primary speaker, which is the one with pause/play and volume controls. You will see a switch called "mode". This switch can be in either S or P position. S stands for Secondary, P stands for Primary. Switch to Primary, and your speaker will now open Bluetooth and will accept analog signals. (The Secondary position is used for systems where four speakers are in use, since only one speaker can act as primary speaker.)Was this helpful? Thank you for your feedback!
-
Our Control X Wireless speakers use Wi-Fi 2.4 GHz network to connect them. If there are any obstacles or people blocking the connection, it can cause interference. We suggest positioning the speakers on a high-level surface or shelf, to avoid any interference.Was this helpful? Thank you for your feedback!
-
Our Control X Wireless speaker has two different patterns for switching on, when using either battery or AC power. When using battery, turning on one speaker in either stereo mode or association mode (4 speakers connected), all will turn on simultaneously, no matter which is primary or secondary. When connected to AC power, switch on the primary speaker in stereo or associated mode, and the secondary speakers will follow. If you have associated speakers stereo or 4 speakers connected, then you have to press primary speaker's power button for more than 2 seconds, then the primary will send signal to secondaries, and they will wake up. It takes approx. 30-60 seconds before all are switched on. If your press it too short (less than 2 seconds), the primary speaker will not "pair" the secondary speakers together. Switch off the primary and start over again.Was this helpful? Thank you for your feedback!
Images & Videos
