Omni 20

Omni 20

Wireless HD Stereo loudspeaker

Getting started with your Omni 20

Getting started with your Omni 20

Quick Start Guide

Get up and running in no time with our easy-to-follow Quick Start Guide

Product Registration

Register your product

Do you own this product? Register it here! And claim your warranty or service easily

Register now

Documents & Downloads

Product Specifications

Transducers
2 x 75mm woofer, 2 x 19mm tweeter
Rated Power
4 x 15W
Bluetooth Transmitter Frequency Range
2402 − 2480MHz
Bluetooth Transmitter Power
<4dBm
Bluetooth Transmitter Modulation
GFSK, 3.14/4 DQPSK, 8DPSK
2.4G Wi-Fi Transmitter Frequency Range
2412 − 2472MHz
2.4G Wi-Fi Transmitter Power
<20dBm (EIRP)
2.4G Wi-Fi Modulation
OFDM, DSSS, DBPSK, DQPSK, CCK, 16QAM, 64QAM
2.4G Wi-Fi Network Compatibility
IEEE 802.11b/g/n
Weight (g)
2125
Power consumption in sleep mode
2.51 Watts/Hour
Note - The HK Omni 20 is intended to be used for streaming music via Bluetooth and Wi-Fi technology. This product is designed to be instantly on and ready to play music at a moment's notice. The HK Omni 20 is in compliance with the European Union energy legislation. It will enter into sleep mode (networked standby) after 10 minutes without operation, after which it can be re-activated via Bluetooth or Wi-Fi.
Frequency Response
53Hz - 20kHz @ -6dB
Signal-to-Noise Ratio
>80dB
Width (mm)
260
Width (in)
10-1/4
Depth (mm)
164
Depth (in)
6-7/16
Height (mm)
166
Height (in)
6-9/16
China
-

Wireless room-filling sound at the touch of a button

The Harman Kardon Omni 20 is a wireless, truly HD audio system. It fills your room with pure, crisp sound thanks to Harman’s expertise in audio technology. Now the music doesn’t stop no matter where you are in your home. Simply set up multiple speakers and enjoy wireless room filling sound at the touch of a button. Play different music in different rooms or stream the same song throughout your house with party mode. Our app and Bluetooth capability let you access any music from your phone or your favorite apps seamlessly.

Seamlessly stream your favorite music to all Harman Kardon wireless HD audio products in your house
Stream your favorite classical music to one room while streaming rock to another. Multiple streams keep everyone happy.
Walk from one room to another and your favorite music will follow at the touch of a button.
Use the Harman Kardon app to stream your favorite music anywhere in your home. Control and configure your HD audio system wirelessly via the app with no cable connection required.
Start a party and jump right in! When multiple songs are playing wirelessly, one button press cycles through them all so you can pick your favorite. One long press of the button starts party mode with every speaker playing back the same music. Room to room control made easy without the need to use your phone or tablet.
Unlike other wireless streaming systems, the Harman Kardon Omni 20 supports 24bit / 96kHz Studio Quality HD audio streaming. Enjoy a superior audio experience, higher resolution than from a CD.
More music, more flexibility, more fun . With this feature, any app (for example iTunes Radio or Spotify) is part of the Harman Kardon whole home audio experience. Use Bluetooth and the Omni 20 will re-stream your music to other speakers in the house.
Group speakers together for an immersive same room wireless sound experience. A pair of Harman Kardon Omni 20 can be used as part of a stereo or multi-channel speaker system.
Connect your audio device or anything via Bluetooth or a 3.5mm mini-jack to your Omni 20 and the speaker will automatically translate the signal to Wi-Fi and stream its sound all over your house for a truly flexible whole home audio experience.
You can connect an OMNI 10 or Omni 20 to your TV set, and use them listen to the TV sound or movie soundtrack. You should use a wired connection from either a fixed line-level output on the TV, or from the TV’s headphone output. It is perfectly possible to add a second OMNI speaker for stereo use, through additional wiring, via signal splitters also known as Y-splitters. When re-streaming the TV sound wirelessly from one Omni speaker to other Omni speakers in the house, the audio signal will be slightly delayed compared to the video signal.

FAQs & How-Tos

8 results
  • No, stereo pairs must be two of the same type of speaker. For example, two Omni 10 or two Omni 10+ speakers will work, but not one Omni 10 and one Omni 10+.
  • Streaming via Bluetooth or direct aux in connection are supported without the HK Controller app. For OMNI+ devices that you already have placed in a room, they are capable of using either Spotify Connect or Chromecast built-in without the need of using the HK Controller app. Use only the HK Controller app for setting up any OMNI+ devices you may have.
  • There is a reset button on the bottom of the Omni+ devices. Press and hold this button for 5 seconds to perform a factory reset of your product. All product settings, Wi-Fi, and Bluetooth connections will be erased. To reset the OMNI 50+ speaker, please do the following: First, press & hold ‘Source’, ‘Vol+’, ‘Vol-‘ buttons at the same time. The Omni 50+ will switched off, indicating that the product was successful reset. Secondly, press ‘power' button to turn on power for the Omni 50+ speaker. Now you can easily set up the product again for your home Wi-Fi network.
  • Make sure you disable AP/Client isolation on your Access Point / Extender and that Multicast forwarding is not disabled between the W-Fi networks. However, we cannot guarantee than streaming will work flawless as Extender networks are tricky and can cause many issues. Always use a 5GHz Wi-Fi network extender for best results.
  • Unfortunately, some Huawei phones are not able to stream music from the HK Controller app to 1st generation Omni speakers. However, the new Omni 10+, 20+, and 50+ have fixed this issue, and you will be able to stream music to them using your Huawei phone.
  • To have the best possible performance for OMNI+ system we advise to have a dual-band router with a powerful chipset and ram for best Wi-Fi performance. This will not only help our products to perform better and more stable, but your other devices at home will have more power and fewer interruptions. Please also be sure that your home Wi-Fi router has Multicast enabled, as our Omni+ system requires this feature enabled in order to work (same goes for Chromecast devices). Always connect our Omni+ system to 5 GHz Wi-Fi whenever possible to limit the risk of devices being slow or interrupted on 2.4GHz Wi-Fi.
  • Yes, they will work together. You can link rooms containing 1st generation Omni speakers with rooms containing 2nd generation Omni speakers and listen to the same music across all of them. Since the 2nd generation has a more powerful processor, we recommend connecting external sources like AUX or Bluetooth to the 2nd generation speakers rather than the 1st generation.
  • Yes, they are backward compatible with your existing Omni speakers.

Can’t find what you’re looking for?

Call us

Call us

To speak to our customer service specialist

1800-102-0525

Mon to Sun 10 AM to 7 PM IST

message

Message Us

Chat with a support agent via Whatsapp at:
91 70658 44446

Mon - Sun: 10:00 am - 7:00 pm (IST)