AVR 2650

AVR 2650

Audio/Video Receiver With Dolby TrueHD & DTS-HD Master Audio & HDMI 1.4 (95 watts x 7) 7.1

2011から2013まで販売

従来/現行製品: AVR 2600
後継製品: AVR 2700
Made in: China

ドキュメントとダウンロード

製品仕様

Power Consumption (full power/idle)
less than 0.5W (standby);420W maximum
Transient intermodulation distortion (TIM):
Unmeasurable
MSRP U.S.
$879.95 each
Output Level/Impedence (ohm)
1Vp-p/75 ohms
Surround system adjacent-channel separation:
Dolby Pro Logic/DPLII
Selectivity (±400kHz):
70dB
Stereo Power
95W per channel, two channels driven @ 8 ohms, 20Hz – 20kHz, less than 0.09% THD
Signal-to-noise Ratio (IHF-A) (dB)
100dB
Selectivity (±10kHz):
30dB
High Instantaneous Current Capability
±35 amps
Usable Sensitivity (IHF)
1.3µV/13.2dBf
Input Sensitivity/Impedence
200mV/47k ohms
Frequency Response
10Hz – 130kHz (+0dB/–3dB)
Frequency Range (kHz)
520 – 1710kHz
Frequency Range (MHz)
87.5 – 108.0MHz
Distortion (1kHz, 50% mod):
0.2%/0.3%
Slew Rate
40V/sec
Usable Sensitivity (Loop)
500µV
Stereo Separation @ 1kHz (dB)
40dB @ 1kHz
Signal-to-Noise Ratio (dB)
45dB
Signal-to-Noise Ratio (Mono/Stereo dB)
70dB/68dB
Distortion (Mono/Stereo)
0.80%
Input Level/Impedence (ohm)
1Vp-p/75 ohms
Depth (in)
17-1/8
Height (in)
6-1/2
Height (mm)
165
Weight(kg)
11.1
Width (in)
17-5/16
Depth (mm)
435
Width (mm)
440
Weight
24.4 lb
Video Frequency Response (Component Video)
10Hz – 8MHz (–3dB)
Television Format
NTSC
IF Rejection (dB)
90dB
Image Rejection (dB)
80dB
Power Requirement
120V AC/60Hz

An advanced 7.1-channel A/V receiver with HDMI 3D plus Dolby, DTS and Logic 7 surround.

Take your home entertainment to the next level. If you’re looking for a receiver packed with the most sought-after home theater technologies, look no further than the Harman Kardon® AVR 2650. As an ideal starting point for building your dream home theater system, the AVR 2650 is blessed with an impressive list of features. The AVR 2650 is a brilliant performer that accommodates virtually any system you pair it up with.

The AVR 2650 high-performance receiver delivers 95 watts per channel with the ability to power a full 5.1-channel, surround-sound system plus two additional surround or front-height loudspeaker outputs. A high-current capability (HCC), ultrawide-bandwidth amplifier design ensures accurate, dynamic sound with enhanced clarity and realism, even at the highest listening levels. You can also connect the AVR 2650 to a powered subwoofer to generate additional low-frequency excitement.
Six HDMI inputs with 3D and 30/36-bit Deep Color deliver high-definition digital video at resolutions up to 1080p with full-fidelity audio through a single cable. There is no loss of video or audio quality because of format conversion, just full-impact Hollywood excitement as its creators meant you to experience it. Audio Return Channel (ARC) enables a TV, via a single HDMI cable, to send audio data “upstream” to an A/V receiver, thereby increasing user flexibility and eliminating the need for a audio connection.
The AVR 2650 receiver can serve as a multimedia entertainment hub that can do much more than play Blu-ray Disc media, DVDs and CDs. Connected directly to your home’s Ethernet network, the receiver can also stream music files and Internet-based stations from your PC, thereby adding a number of new and diverse entertainment options.
Dolby Volume technology maintains the same volume level no matter what entertainment you’re viewing. You need to set the AVR 2650 volume level only once to eliminate unpredictable volume differences among TV shows, commercials and movies.
The AVR 2650 delivers high-resolution audio to match the digital video of Blu-ray Disc formats, unlocking the full potential of movie soundtracks formatted with Dolby TrueHD and DTS-HD Master Audio coding. No matter what mode or mood you are in, you’ll always hear playback at its finest.
HARMAN Logic 7 technology transforms a stereo input into full 7.1-channel surround sound, courtesy of proprietary algorithms that make any audio source – HDMI, analog, component, composite or computer-based audio from a USB connection – truly spectacular. The result is optimal quality and a superior, enveloping experience that engulfs you in a 360-degree soundscape.
For 7.1-channel playback, Dolby Pro Logic® IIz surround-sound processing lets you add a pair of front-height channels for an extra sound dimension to your movies, music or video games. Now, a horizontal sound field from stereo and 5.1 material – with sound being directed at you from only one plane – becomes a surround-sound experience with added depth and dimension.
The optional Harman Kardon The Bridge IIIP docking station (sold separately) works with an Apple iPod or iPhone to expand your entertainment options beyond DVD and Blu-ray Disc media. Once connected, The Bridge IIIP even charges your Apple device and works seamlessly with the AVR 2650’s system remote control to navigate and play your favorite music and video tracks.
The HARMAN EzSet/EQ™ auto-calibration process tailors the AVR 2650’s loudspeaker outputs to match playback volume levels for your specific room conditions automatically. The system features an easy-to-follow menu display and a plug-in calibration microphone.
Six HDMI input ports let you digitally interconnect your entire system for maximum audio/video performance. HDMI-format ports dramatically reduce connection confusion while ensuring the greatest chance for compatibility with whatever audio/video equipment you are planning to connect.

なにかお困りですか?

メールでのお問い合わせ

メールでのお問い合わせ

弊社の3営業日以内には、サポート担当より連絡させて頂きますので、今しばらくお待ちください。

メールでお問い合わせ
チャットでのお問い合わせ

チャットでのお問い合わせ

受付時間: 土日・祝日・年末年始を除く、平日9:30~17:30

message