AVR 147

AVR 147

Audio/Video Receiver With Dolby Digital & DTS & HDMI Switching (50 watts x 2 | 40 watts x 5)

2007から2008まで販売

従来/現行製品: AVR 145
後継製品: AVR 154
Made in: China
Note: This is the first entry level receiver to have HDMI Switching

ドキュメントとダウンロード

製品仕様

Power Requirements
AC 120V/60Hz
Power Consumption
65W idle, 540W maximum (5 channels driven)
Digital Inputs (coaxial/optical)
2/2 on rear; 1/1 on front
HDMI
Two inputs/1 output, switching only. Simplay HD verified.
Analog Inputs
1 A/V on front panel
Analog Inputs
2 audio-only
Analog Inputs
3 A/V on rear panel
Analog Inputs
6-channel input
Analog Inputs
The Bridge/DMP
Analog Inputs
tuner
On-Screen Display
Yes
Multizone Capability
No
Auto Setup
EzSet/EQ room equalization
Remote Control
Ten-device, programmable remote
Shipping Weight (System, Accessories, Packing)
26.2 lb (11.9kg)
MSRP U.S.
$449.95 each
# of Amplifier Channels
5
Continuous Average Power (FTC) per Channel (stereo mode)
50 Watts per channel, 20Hz – 20kHz, @ <0.07% THD, both channels driven into 8 ohms
Front L & R Channels
40 Watts per channel @ <0.07% THD, 20Hz – 20kHz into 8 ohms
Center Channel
40 Watts @ <0.07% THD, 20Hz – 20kHz into 8 ohms
Surround Channels
40 Watts per channel @ <0.07% THD, 20Hz – 20kHz into 8 ohms
Input Level/Impedance
200mV/47k ohms - Linear (High-Level)
Signal-to-Noise Ratio
100dB (IHF-A)
Surround System Adjacent Channel Separation:
Dolby Pro Logic I and II
40dB
Dolby Digital
55dB
DTS
55dB
Frequency Response
10Hz – 130kHz (+0/-3dB @ 1 watt)
Transient Intermodulation Distortion (TIM)
Unmeasurable
Slew Rate
40V/µsec
Width
17-5/16 inch (440mm)
Height
6-1/2 inch (165mm)
Depth
15 inch (382mm)
Weight
21.3 lb (9.7kg)
Dimensions:
Carton Dimensions (W x H x D)
22 inch x 10-1/2 inch x 18-5/16 inch (559mm x 267mm x 465mm)
Television Format
NTSC
Input Level/Impedance
1V p-p/75 ohms
Output Level/Impedance
1V/75 ohms
Video Frequency Response:
Composite and S-Video
10Hz – 8MHz (–3dB)
Component Video
10Hz – 100MHz (–3dB)
HDMI
Switching
Frequency Range
AM... 520 – 1720kHz
Frequency Range
FM... 87.5 – 108.0MHz
Signal-to-Noise Ratio
AM... 45dB
Usable Sensitivity
FM... IHF 1.3µV/13.2dBf
Signal-to-Noise Ratio
FM... Mono/Stereo 70/68dB
Usable Sensitivity
AM... Loop 500µV
Distortion
AM... 1kHz, 50% Mod 0.8%
Distortion
FM... Mono/Stereo 0.2/0.3%
Selectivity
AM... ± 10kHz, 30dB
Stereo Separation
FM... 40dB @ 1kHz
Selectivity
FM... ± 400kHz, 70dB
Image Rejection
FM... 80dB
IF Rejection
FM... 90dB
Amplifier Power (RMS)
40 x 5 @ 8 ohms (20Hz – 20kHz, <0.07% THD) (all channels driven at full power)
High Instantaneous Current Capability (HCC)
± 25 Amps

Fully connected! That is a perfect description of the AVR 147, where two-input, Simplay HD;-verified HDMI; switching, two 100MHz-capable component video inputs, a wealth of digital audio inputs and both XM Ready and The Bridge connections let you connect and command virtually any home theater source. Logic 7 processing, EzSet/EQ; technology and high-current amplification take care of the audio, to provide you with the best sound.

なにかお困りですか?

メールでのお問い合わせ

メールでのお問い合わせ

弊社の3営業日以内には、サポート担当より連絡させて頂きますので、今しばらくお待ちください。

メールでお問い合わせ
チャットでのお問い合わせ

チャットでのお問い合わせ

受付時間: 土日・祝日・年末年始を除く、平日9:30~17:30

message