W126Be

W126Be

6.5-inch (165mm) 2-way In-wall Loudspeaker

ドキュメントとダウンロード

製品仕様

Model
W126Be
Description
6.5" (165mm) 2-way In-wall Loudspeaker
High Frequency Transducer
1" (25mm) Beryllium dome with dual ceramic-magnets and acoustic lens waveguide
Low Frequency Transducer
6.5" (165mm) Deep Ceramic Composite (DCC) Aluminum Cone Woofer
Recommended Amplifier Power (RMS)
50-150 Watts@ 4 ohms
Frequency Response (-6dB on-axis)
55-40 kHz
Sensitivity (2.83V@1m)
89 dB
Maximum SPL
105 dB
Impedance (Nominal / Minimum)
6 Ohms / 4 ohms
Crossover Frequency
2100 Hz
Crossover Type / Slope
3rd order
Controls
High Frequency Level - Flat / Attenuated
Input Type
Gold-plated Spring-Loaded Binding Posts
Mounting Type
Revel Cat Claw Mounting System
Compatible Wall Thickness Range
Min 0.4" (10mm) / Max 1.0" (25mm)
Cutout Dimension(s)
14.1" x 8.9" (357mm x 226mm)
Mounting Depth
3.5" (88.7mm)
Recommended Enclosure Volume Range
550 in3 (9L) to 1100 in3 (18L)
Net Dimensions with grille (HxWxD)
15.6" x 10.2" x 3.8" (395.2mm x 260.2mm x 96.7mm)
Net Weight (Speaker + Grille)
10.4 lb (4.7kg)
Shipping Dimensions (HxWxD)
22.4" x 14.1" x 9.7" (570mm x 357mm x 245mm)
Shipping Weight
14.1 lb (6.4kg)
Packed As (Each / Pair)
Each
UPC Code
050667380120
EAN Code
1200130003585

6.5-inch (165mm) 2-way In-wall Loudspeaker

With a compact design the W126Be 6.5-inch (165mm) 2-way In-wall Loudspeaker is perfect for high-end 2 channel and distributed audio in-wall systems. They are also perfect as fronts, sides, or rears within smaller high-end media rooms. A zero-bezel magnetically attached grille allows the W126Be to blend into any décor and with elements including Beryllium Tweeters with Acoustic Waveguides and Patented Revel DNA it is sure to deliver unparalleled detail and a cohesive soundstage. Additionally, the W126Be shares the same caliber of components and acoustic signature as the PerformaBe in-room loudspeakers allowing it to be mixed and matched to systems where bookshelf or floor standing versions may already exist. At the heart of the W126Be is a 1-inch (25mm) beryllium dome tweeter driven by dual ceramic-magnets. The powerful tweeter and 5th-generation ceramic-coated, cast-aluminum Acoustic Lens waveguide seamlessly integrate with the directivity of the companion woofer driver resulting in greater efficiency, improved dynamic range, reduced distortion, and increased power handling compared to aluminum or titanium tweeters. The 6.5-inch (165mm) aluminum cone woofer utilizes Deep Ceramic Composite (DCC) cone for improved performance. DCC is a plasma electrolytic oxidation process that uses a plasma discharge to create a coarse ceramic coating on both sides of the aluminum core. The deep ceramic layers sandwiching the aluminum core provide constrained layer damping that push cone breakup modes outside of the passband allowing the driver to maintain ideal pistonic motion throughout its range. DCC cones combine with optimized motor magnetics to deliver improved mid- and low-frequency performance. Revel PerformaBe crossover networks utilize all film capacitors and air core inductors in the midrange and tweeter circuits. These premium components allow Revel's world-class engineers to extract nuances and details from music that would otherwise be lost. Combined with traditional Revel high-order crossover slopes and proprietary Acoustic Lens waveguide geometry, transducer integration is seamless.

なにかお困りですか?

メールでのお問い合わせ

メールでのお問い合わせ

弊社の3営業日以内には、サポート担当より連絡させて頂きますので、今しばらくお待ちください。

メールでお問い合わせ
チャットでのお問い合わせ

チャットでのお問い合わせ

受付時間: 土日・祝日・年末年始を除く、平日9:30~17:30

message