サポート / スピーカー / サウンドバーシリーズ / JBL RALLYBAR S
JBL RALLYBAR S

JBL RALLYBAR S

21" Bluetooth® Universal Outdoor Vehicle Soundbar with 150Wrms amplifier

2023から現在まで販売

JBL RALLYBAR Sを始める

Product Registration

製品を登録する

この製品をお持ちですか？ こちらからご登録ください！保証やサービスの依頼が簡単になります

今すぐ登録する

ドキュメントとダウンロード

製品仕様

Transducers
4x 2.75”(70mm) woofers, 2x 1”(25mm) tweeters, 2x 7.2”(182.8mm) x3”(76.2mm) Racetrack Passive Radiators
Output Power
150WRMS, 300W PEAK (IEC60268)
THD at Rated RMS Power
< 1%
Voltage Range
9.6 - 16VDC
Quiescent Current Draw
< 0.9A
Maximum Current Draw
25A
Frequency response
45Hz-40kHz
Signal-to-noise Ratio
> 80 dB
Cable type
12AWG
Cable length
12 Feet (3.66m)
Bluetooth® Version
5.3
Bluetooth® profile
A2DP V1.3, AVRCP V1.6
Bluetooth® transmitter frequency range
2400 MHz – 2483.5 MHz
Bluetooth® transmitter power
≤ 15 dBm (EIRP)
Aux-In
2Vrms(0.35Vrms - 2Vrms), 4Vrms(0.7Vrms - 4Vrms), 6Vrms(1.05Vrms - 6Vrms) (3.5 mm connector)
Aux-Out
2 Vrms (3.5 mm connector)
USB format
FAT16, FAT32
Soundbar Dimension (L x W x H)
21-5/32" x 5" x 4-5/8" (537.5 x 126.7 x 118mm)
Soundbar Weight
11.46 lbs (5.2kg)
Packaging dimensions (W x H x D)
24" x 9" x 7.6" (611 x 229 x 193mm)
Gross weight
17 lbs (7.74 kg)

JBL RALLYBAR S is a IP66 rated water resistant Bluetooth® Soundbar with 150Wrms amplifier and extraordinary sound experience to UTVs, golf carts, boats and other vehicles built for recreation. Each RALLYBAR S can be used by itself or connected to multiple RALLYBAR S or RALLYBAR S family products (RALLYBAR, RALLYBAR S and RALLYBAR XL) by using its built-in broadcast mode. The innovative mounting kits design (patent pending) offers multiple position combinations on top and back to accommodate a variety of installation requirements. Bluetooth®, USB disk and Aux-in audio players are supported. HI-Resolution Audio for AUX-IN input audio source is available.

The 150Wrms (THD <1%) Class- D amplifier ensures powerful, high quality JBL Original Pro Sound when you take the wheel or helm.
IP66 rated water resistant protects soundbar speakers from dust ingress and powerful water jets.
Broadcast Mode allows RALLYBAR S connect to multiple RALLYBAR S or RALLYBAR S family products (RALLYBAR, RALLYBAR S and RALLYBAR XL), allowing each soundbar to play the same audio source.
Party Mode provides simultaneous connection of up to two Bluetooth® devices—while playing music from one device at a time.
With HI-RESOLUTION Audio on wired audio sources, JBL Original Pro sound tuning, and DSP delivers extraordinary sound performance.
The innovative mounting kits design (patent pending), offers multiple position combinations on top and back to accommodate a variety of installation requirements.
When user’s smartphone connected to the JBL RALLYBAR S and a JBL Click Bluetooth controller (sold separately on JBL Website), you can use the JBL Click to control the music from your smartphone including “play/pause”, “next track”,” volume up/down”.
RALLYBAR S can detect the audio source automatically according to the source priority definition: USB disk >Bluetooth®> AUX-IN audio source. Higher priority source can break-in Lower priority audio source.
3.5mm auxiliary output (2V) can connect with external powered speakers and subwoofers, which can have changes of volume down/volume up/ play or pause according to Soundbar’s adjustment. The Line output is covered by a waterproof connector.
RALLYBAR S Offers 3 different Gain settings when connected by Aux-in audio:2V, 4V, and 6V.

画像＆ビデオ

JBL RALLYBAR S - Black - Hero
  • JBL RALLYBAR S - Black - Hero
  • JBL RALLYBAR S - Black - Front
  • JBL RALLYBAR S - Black - Back
  • JBL RALLYBAR S - Black - Right
  • JBL RALLYBAR S - Black - Bottom
  • JBL RALLYBAR S - Black - Detailshot 1
  • JBL RALLYBAR S - Black - Detailshot 2

なにかお困りですか？

メールでのお問い合わせ

メールでのお問い合わせ

弊社の3営業日以内には、サポート担当より連絡させて頂きますので、今しばらくお待ちください。

メールでお問い合わせ
チャットでのお問い合わせ

チャットでのお問い合わせ

受付時間: 土日・祝日・年末年始を除く、平日9:30～17:30

message