№ 5909
PREMIUM WIRELESS HEADPHONES WITH ANC
Getting started with your № 5909
Documents & Downloads
Product Specifications
- Adaptive Active Noise Cancellation (ANC) with three modes
- Ambient Aware mode for situational awareness while on the go
- Four-microphone voice array with Smart Wind Adaption
- Available colors include Pearl Black, Ice Pewter, Radiant Red
- Premium leather headband and replaceable leather ear cushions
- Anodized aluminum frame
- Automotive-grade metallic painted ear cups
- LDAC audio codec
- Digital circuitry compatible with 24-bit/96kHz processing
- Acoustic response up to 40kHz
- Expertly tuned 40 mm Beryllium coated drivers acoustically optimized to the HARMAN Curve
- Bluetooth 5.1 with LDAC, AAC and aptX™ Adaptive technologies
- Up to 34 hours battery life, 30 hours playtime with ANC enabled
- Up to 6 hours playtime with 15-minute quick charge
Experience the first-ever headphones from Mark Levinson, a pioneer in high-fidelity audio for the past 50 years. Reference-quality sound meets luxurious comfort in a lightweight and durable set of headphones featuring Adaptive Active Noise Cancellation (ANC) that’s perfect for travel. Reveal the hidden details in your music – at home, on the go, or anywhere you find a moment to listen.
FAQs & How-Tos
-
1. Power OFF the headphones. 2. Hold power ON/OFF button >4 seconds to enter pairing mode. 3. Simultaneously hold volume + button and power button until LED lights flash red/white.Was this helpful? Thank you for your feedback!
-
Hold the Power ON/OFF button down for >5 seconds. Status light will pulse White when headphones are in pairing mode. Release. Access Bluetooth settings on your source device. Locate "№ 5909" and connect. A solid white light indicates you are connected.Was this helpful? Thank you for your feedback!
-
1. Enter pairing mode and connect to device 1. 2. Enter pairing mode again and device 1 will disconnect. 3. Connect to device 2 and turn headphone off. 4. Turn headphones on and headphones will automatically connect to device 1 and 2 simultaneously. 5. Pause one device and play from the other to swap headphones connection. NOTE: Maximum number of devices that can be connected at any given time - 2 source devices.Was this helpful? Thank you for your feedback!
-
To remove ear pads: gently pull the earpads from the top. The snaps will release. To re-attach ear pads, hook the 2 catches into the slots at the bottom of the earcup. Gently push the earpad against the earcup, ensuring all the snaps are secured.Was this helpful? Thank you for your feedback!
-
Your headphones arrive in ANC OFF mode. To switch between modes, press the red ANC button on the left ear cup, this will cycle between OFF / ANC / AWARENESS. Via the app, you can select the default ANC of HIGH, ADAPTIVE or LOW and the default AWARENESS level of VOICEPASS or AMBIENT.Was this helpful? Thank you for your feedback!
-
To charge, plug in the USB-C Connector and connect to a USB-C port (or USB-A port using the included adaptor).
Please note: you cannot listen while charging.
Was this helpful? Thank you for your feedback! -
To clean your headphones, please follow the instructions below:
- Clean earpads and headphones with a soft, slightly damped cloth.
- Do not soak, submerge or allow moisture to enter near drivers and cable jacks.
- Earpads and cables can be purchased if worn out at www.Marklevinson.com.
- Use a polishing cloth to wipe down after use to remove fingerprints etc.
Was this helpful? Thank you for your feedback! -
To connect any device to your headphone, please follow these steps below:
- First, hold the power ON/OFF button down for >5 seconds.
- The status light will pulse white when the headphones are in pairing mode.
- Next, release the power ON/OFF button.
- Next, go to the Bluetooth settings on your source device (Smartphone, tablet, etc.).
- Find the Mark Levinson No 5909 headphones in the Bluetooth list, and tap to connect.
- A solid white light indicates that you are connected to the headphones.
Was this helpful? Thank you for your feedback! - First, hold the power ON/OFF button down for >5 seconds.
-
- Enter pairing mode and connect to "device 1" (Phone, tablet, etc.)
- Enter pairing mode again, and "device 1" will disconnect.
- Connect to "device 2" and turn the headphone off.
- Turn headphone on, and headphones will automatically connect to "device 1" and "device 2" simultaneously.
- Pause one device and play from the other to swap the headphones connection.
Was this helpful? Thank you for your feedback! -
For airplanes or analog listening, plug 3.5mm audio plug into headphone audio input to engage passive (wired) audio.
The headphones will power off when the audio cable is plugged in.
Passive audio listening will work even if the battery is depleted and the microphone and buttons are disabled during the passive mode.
NOTE: The No 5909 is only compatible with Mark Levinson's proprietary passive audio cables.Was this helpful? Thank you for your feedback!
Images & Videos
Can’t find what you’re looking for?
Call Us
Talk to a product expert
Call Us now at:
(877) 871-6755
Mon - Fri: 9:00 am - 11:00 pm (ET)
Sat - Sun: 9:00 am - 5:00 pm (ET)
Chat with Us
Mon - Fri: 9:00 am - 11:00 pm (ET)
Sat - Sun: 9:00 am - 5:00 pm (ET)