SDA-1700

SDA-1700

Class D Subwoofer Amplifier

Documentos y descargas

Especificaciones del producto

Rated Output Power (RMS) into the minimum impedance of 4 Ohms
700Watts
Peak power
1500W
Rated impedance
8Ohms per speaker output
Minimum load impedance
4Ohms
Model-Specific EQ 1
Only for JBL SYNTHESIS SSW-4
Model-Specific EQ 2
Only for JBL C82W
Input Sensitivity to 1W @ 50Hz
16.3mVrms +/- 1dB (Single input driven) Gain=41.7dB
Input Overload (Both inputs driven)
≥ 2.0Vrms
Input Impedance
> 10K Ohms
Low Pass Crossover range
50-150Hz
Auto Turn On Input Sensitivity @ 50Hz
Typical 10mV
THD+N at 1W
< 0.3%
THD+N at Rated Output Power
< 1%
Signal-to-Noise ratio to 1W
> 65dBA
Minimum AC Mains power requirements
100-120VAC-50-60Hz Model
Power consumption (Standby)
0.5W
Height
3.50in (88.90mm)
Width
17in (431.8 mm)
Depth
11.04in (280.3mm)
Weight
14Lb (6.35Kg)

The SDA-1700 is a custom amplifier solution, optimized for the highest level of performance and reliability. This rackmount amplifier includes user features on the front panel, and a custom installer focused feature set on the rear panel. As part of JBL Synthesis custom in-wall subwoofer system, this rack mountable Class D component is designed to power the SSW-4 in-wall subwoofer.

¿No encuentras lo que buscas?

Llámanos

Llámanos

Habla con un experto sobre nuestros productos
Llámanos a este número: 55-5328-1023

Lunes - Viernes: 09:00 AM -06:00 PM (Hora Centro)

Envíanos un correo electrónico

Envíanos un correo electrónico

¡Estamos aquí de lunes a viernes para responder sus correos lo antes posible!

Envíanos un correo electrónico
message