Descripción general de la asistencia / Audio en Casa / Sistemas de audio/vídeo / Sistemas de audio compactos / AVAP 5G

AVAP 5G

AVR5 Receiver & AVS10 Speaker System - 6PC

Vendido desde 1999 hasta 2000

Documentos y descargas

Manuales

Owners Manual (English) 1.56 MB

Especificaciones del producto

Características generales

Power Requirements: 120V AC/60Hz

Power Consumption: Receiver… 72W idle, 332W maximum (2 channels driven)

MSRP U.S.: $699.95 per system

Medidas

Dimensions: Receiver… Width 17-2/5 inch (442mm)

Dimensions: Receiver… Height 6-1/8 inch (156mm)Height measurement includes feet and chassis.

Dimensions: Receiver… Depth 16-5/16 inch (415mm) Depth measurement includes knobs, buttons and terminal connections.

Dimensions (H x W x D): SATELLITES… 7 x x 4 3/4 x 3 3/4

Dimensions (H x W x D): CENTER… 4 3/4 x 10 1/2 x 3 3/4

Dimensions (H x W x D): SUB… 11 1/2 x 11 1/2 x 11 1/2

Weight: Receiver… 24.6lbs (11.2kg)

Especificaciones de vídeo

Television Format: NTSC

Input Level/Impedance: 1Vp-p/75 ohms

Output Level/Impedance: 1V/75 ohms

Video Frequency Response: 10Hz to 8MHz (-3dB)

Tuner Specifications

Frequency Range: AM... 520 – 1710kHz

Frequency Range: FM... 87.5 – 108MHz

Signal-to-Noise Ratio: AM... 43dB

Usable Sensitivity: FM... IHF 1.3?V/13.2dBf

Signal-to-Noise Ratio: FM... 70dB Mono ( measured at amV RF Input Level)

Usable Sensitivity: AM... Loop 500µV/M

Distortion: AM... 1kHz, 50% Mod. 0.8%

Signal-to-Noise Ratio: FM... 68dB Stereo ( measured at amV RF Input Level)

Distortion (Mono/Stereo): FM... 0.3%/0.5%

Selectivity: AM... ± 10kHz, 30dB

Stereo Separation: FM... 40dB @1kHz

Selectivity: FM... ± 400kHz, 65dB

Image Rejection: FM... 40dB

IF Rejection: FM... 110dB

Tuner Output Level: FM... 1kHz, ±75kHz Dev 500mV

Subwoofer Specifications

Frequency Response: 45Hz – 150kHz

Crossover Frequency(ies): continuously variable 50Hz – 150Hz

Input Impedance: 200k ohms (high level)

Input Impedance: 10 ohms (low level)

Recommended Amplifier Power (RMS): 50 Watts

Subwoofer Transducer: specially designed 8 inch polycone

Satellite Speaker Specifications

Frequency Response: 200Hz – 20kHz

Crossover Frequency(ies): 5kHz

Nominal Impedance: compatible with 8 ohms

Low-Frequency Transducer (Woofer): 3-1/2 inch shielded

High-Frequency Transducer (Tweeter): .5 inch (13mm) polycarbonate tweeter with acoustic lens

Center Speaker Specifications

Frequency Response: 150Hz – 20kHz

Crossover Frequency(ies): 5kHz

Nominal Impedance: compatible with 8 ohms

Low-Frequency Transducer (Woofer): 3-1/2 inch shielded

Amplifier Specifications

Continuous Average Power (FTC) per Channel (stereo mode): 45 Watts per channel, 20Hz – 20kHz @ <0.08% THD, both channels driven into 8 ohms

Amplifier Power (RMS): SURROUND MODES... Front L&R channels... 35 Watts per channel, 20Hz – 20kHz @ <0.08% THD into 8 ohms

Amplifier Power (RMS): SURROUND MODES... Surround channels... 35 Watts per channel, 20Hz – 20kHz @ <0.08% THD into 8 ohms

Amplifier Power (RMS): SURROUND MODES… Center channel... 35 Watts @ <0.08% THD, 20Hz – 20kHz into 8 ohms

High Instantaneous Current Capability (HCC): ± 35 Amps

Input Level/Impedance: 200mV/47k ohms - Linear (High-Level)

Signal-to-Noise Ratio: 92dB (IHF-A)

Pro Logic Decoding: 40dB

Frequency Response: 8Hz – 120kHz (+0/-3dB @ 1 watt)

Transient Intermodulation Distortion (TIM): Not Measurable

Rise Time: 16µsec

Slew Rate: 40V/µsec

We've matched one of our most popular Dolby Pro Logic receivers, AVR5, with 5 AVS10 speakers (1/2 inch tweeter, 3-1/2 inch woofer) and included an 8 inch 50-watt Powered Sub for a system that will turn viewing an ordinary TV into a Home Cinema experience that will truly astound you. Receiver Reconditioned.