Documentos y descargas
Especificaciones del producto
- MSRP U.S.
- $259.95 each
- Dimensions (H x W x D)
- 4-13/16 X 17-3/8 X 14-1/2
- Usable Sensitivity
- FM MONO – 2.5uV
- Quieting Sensitivity
- MONO – 3.5uV
- Quieting Sensitivity
- STEREO – 45uV
- Signal-to-Noise Ratio
- FM STEREO – -65dB
- Capture Ratio
- FM... 1.9dB
- Alternate Channel Selectivity
- AM... 35dB
- Alternate Channel Selectivity
- FM… 60dB
- IF Rejection
- 90dB AM – 45dB
- AM Rejection
- FM... 50dB
- Stereo Separation
- 35dB @ 1kHz
- Total Harmonic Distortion
- FM MONO – 0.2% 1kHz, 100% Modulation
- Total Harmonic Distortion
- FM STEREO – 0.3% 1kHz, 100% Modulation
- Frequency Range
- FM – DC = 60kHz (+0/-3dB) @ detector output
- Sensitivity
- AM... AM – 350uV/m
- Selectivity
- AM – 40dB
- Image Rejection
- AM – 50dB
- Amplifier Power (RMS)
- 20 watts @ < 0.09% THD, primarily low order harmonic both @ 8 ohms from 20 – 20kHz
- Power Bandwidth
- HALF POWER – <20Hz – 80kHz with 8 ohms
- Frequency Response
- below 3Hz – 90kHz +0,-3dB at rated output
- Total Harmonic Distortion
- 0.05% primarily low order harmonics (1kHz @ rated output)
- Transient Intermodulation Distortion (TIM)
- 0.09% @ rated output
- Transient Intermodulation Distortion (TIM)
- 0.05%
- Slew Rate
- 40 volts per usec
- Rise Time
- SQUARE WAVE – better than 2.5 usec
- Square Wave Tilt
- 5% @ 20Hz
- Negative Feedback
- 25dB
- Damping Factor
- >30 @ 8 ohms
- Hum and Noise
- PHONO – -80dB A-WTD
- Hum and Noise
- AUX & RES – -85dB A-WTD
- Input Sensitivity
- PHONO – 2.5mV
- Input Sensitivity
- AUX – 180mV
- Input Impedance
- PHONO – 47k ohms
- Phono Overload
- >80mV
- RIAA Equalization
- ±1dB
Stereo Receiver (20 watts x 2)
Imágenes y vídeos
¿No encuentras lo que buscas?
Llámanos
Habla con un experto sobre nuestros productos
Llámanos a este número:
55-5328-1023
Lunes - Viernes: 09:00 AM -06:00 PM (Hora Centro)
Envíanos un correo electrónico
¡Estamos aquí de lunes a viernes para responder sus correos lo antes posible!