AVR 144

AVR 144

Audio/Video Receiver With Dolby Digital & DTS (40 watts x 2 | 30 watts x 5)

Vendido desde 2007 hasta 2007

Producto predecesor: AVR 140
Producto sucesor: AVR 154
Hecho en: China
Nota: This is the new Super Low Budget No Frills AVR Series.

Documentos y descargas

Especificaciones del producto

Power Requirements
AC 120V/60Hz
Power Consumption
65W idle, 540W maximum (5 channels driven)
Digital Inputs (coaxial/optical)
2/2 on rear; 1/1 on front
Analog Inputs
1 A/V on front panel
Analog Inputs
2 audio-only
Analog Inputs
3 A/V on rear panel
Analog Inputs
6-channel input
Analog Inputs
tuner
On-Screen Display
Yes
Multizone Capability
No
Auto Setup
No
Remote Control
Seven-device, programmable remote
Shipping Weight (System, Accessories, Packing)
26 lb (11.8kg)
MSRP U.S.
$449.95 each
# of Amplifier Channels
5
Continuous Average Power (FTC) per Channel (stereo mode)
40 Watts per channel, 20Hz – 20kHz, @ <0.07% THD, both channels driven into 8 ohms
Front L & R Channels
30 Watts per channel @ <0.07% THD, 20Hz – 20kHz into 8 ohms
Center Channel
30 Watts @ <0.07% THD, 20Hz – 20kHz into 8 ohms
Surround Channels
30 Watts per channel @ <0.07% THD, 20Hz – 20kHz into 8 ohms
Input Level/Impedance
200mV/47k ohms - Linear (High-Level)
Signal-to-Noise Ratio
100dB (IHF-A)
Surround System Adjacent Channel Separation:
Dolby Pro Logic I and II
40dB
Dolby Digital
55dB
DTS
55dB
Frequency Response
10Hz – 130kHz (+0/-3dB @ 1 watt)
Transient Intermodulation Distortion (TIM)
Unmeasurable
Slew Rate
40V/µsec
Width
17-5/16 inch (440mm)
Height
6-1/2 inch (165mm)
Depth
15 inch (382mm)
Weight
21.12 lb (9.6kg)
Dimensions:
Carton Dimensions (W x H x D)
21-7/8 inch x 10-1/2 inch x 18-5/16 inch (555mm x 266mm x 465mm)
Television Format
NTSC
Input Level/Impedance
1Vp-p/75 ohms
Output Level/Impedance
1V/75 ohms
Video Frequency Response:
Composite and S-Video
10Hz – 8MHz (–3dB)
Component Video
10Hz – 100MHz (–3dB)
Frequency Range
AM... 520 – 1720kHz
Frequency Range
FM... 87.5 – 108.0MHz
Signal-to-Noise Ratio
AM... 45dB
Usable Sensitivity
FM... IHF 1.3µV/13.2dBf
Signal-to-Noise Ratio
FM... Mono/Stereo 70/68dB
Usable Sensitivity
AM... Loop 500µV
Distortion
AM... 1kHz, 50% Mod 0.8%
Distortion
FM... Mono/Stereo 0.2/0.3%
Selectivity
AM... ± 10kHz, 30dB
Stereo Separation
FM... 40dB @ 1kHz
Selectivity
FM... ± 400kHz, 70dB
Image Rejection
FM... 80dB
IF Rejection
FM... 90dB
Amplifier Power (RMS)
30 x 5 @ 8 ohms (20Hz – 20kHz, <0.07% THD) (all channels driven at full power)
High Instantaneous Current Capability (HCC)
± 25 Amps

The AVR 144 puts Harman Kardon sound within the reach of almost any budget, with world-class features such as Logic 7 processing, high-current amplification, A/V Sync delay, component video switching and a host of audio enhancements. Dream no more; the AVR 144 makes high-performance home theater a reality for nearly everyone.

¿No encuentras lo que buscas?

Llámanos

Llámanos

Habla con un experto sobre nuestros productos
Llámanos a este número: 55-5328-1023

Lunes - Viernes: 09:00 AM -06:00 PM (Hora Centro)

Envíanos un correo electrónico

Envíanos un correo electrónico

¡Estamos aquí de lunes a viernes para responder sus correos lo antes posible!

Envíanos un correo electrónico
message