AVR 145

AVR 145

Audio/Video Receiver With Dolby Digital & DTS (50 watts x 2 | 40 watts x 5)

Vendido desde 2006 hasta 2007

Producto predecesor: AVR 140
Producto sucesor: AVR 147
Hecho en: China

Documentos y descargas

Especificaciones del producto

Power Requirements
AC 220 – 240V/50Hz
Power Consumption
65W idle, 540W maximum (6 channels driven)
Digital Inputs (coaxial/optical)
2/2 on rear; 1/1 on front
Analog Inputs
1 A/V on front panel
Analog Inputs
2 audio-only
Analog Inputs
3 A/V on rear panel
Analog Inputs
6-channel input
Analog Inputs
The Bridge
Analog Inputs
tuner
On-Screen Display
Yes
Multizone Capability
No
Auto Setup
EzSet remote control
Remote Control
Eight-device, programmable remote
Shipping Weight (System, Accessories, Packing)
13.2kg
MSRP U.S.
$549.95 each
# of Amplifier Channels
5
Continuous Average Power (FTC) per Channel (stereo mode)
50 Watts per channel, 20Hz – 20kHz, @ <0.07% THD, both channels driven into 8 ohms
Front L & R Channels
40 Watts per channel @ <0.07% THD, 20Hz – 20kHz into 8 ohms
Center Channel
40 Watts @ <0.07% THD, 20Hz – 20kHz into 8 ohms
Surround Channels
40 Watts per channel @ <0.07% THD, 20Hz – 20kHz into 8 ohms
Input Level/Impedance
200mV/47k ohms - Linear (High-Level)
Signal-to-Noise Ratio
100dB (IHF-A)
Surround System Adjacent Channel Separation:
Dolby Pro Logic I and II
40dB
Dolby Digital
55dB
DTS
55dB
Frequency Response
10Hz – 130kHz (+0/-3dB @ 1 watt)
Transient Intermodulation Distortion (TIM)
Unmeasurable
Slew Rate
40V/µsec
Width
440mm
Height
150mm
Depth
382mm
Weight
9.7kg
Dimensions:
Carton Dimensions (W x H x D)
559mm x 267mm x 476mm
Television Format
PAL, NTSC
Input Level/Impedance
1Vp-p/75 ohms
Output Level/Impedance
1V/75 ohms
Video Frequency Response:
Composite and S-Video
10Hz – 8MHz (–3dB)
Component Video
10Hz – 100MHz (–3dB)
Frequency Range
AM... 520 – 1720kHz
Frequency Range
FM... 87.5 – 108.0MHz
Signal-to-Noise Ratio
AM... 45dB
Usable Sensitivity
FM... IHF 1.3µV/13.2dBf
Signal-to-Noise Ratio
FM... Mono/Stereo 70/68dB
Usable Sensitivity
AM... Loop 500µV
Distortion
AM... 1kHz, 50% Mod 0.8%
Distortion
FM... Mono/Stereo 0.2/0.3%
Selectivity
AM... ± 10kHz, 30dB
Stereo Separation
FM... 40dB @ 1kHz
Selectivity
FM... ± 400kHz, 70dB
Image Rejection
FM... 80dB
IF Rejection
FM... 90dB
Amplifier Power (RMS)
40 x 5 @ 8 ohms (20Hz – 20kHz, <0.07% THD) (all channels driven at full power)
High Instantaneous Current Capability (HCC)
± 25 Amps

Affordably priced, but full-featured. The AVR 145's sonic quality and sophisticated features make it an exceptional value. From RS-232 software upgradeability to the latest Cirrus Logic 49500 series DSP, Logic 7 processing, A/V Sync Delay and 100MHz component video switching, the AVR 145 is modest in price, but high in performance.

¿No encuentras lo que buscas?

Llámanos

Llámanos

Habla con un experto sobre nuestros productos
Llámanos a este número: 55-5328-1023

Lunes - Viernes: 09:00 AM -06:00 PM (Hora Centro)

Envíanos un correo electrónico

Envíanos un correo electrónico

¡Estamos aquí de lunes a viernes para responder sus correos lo antes posible!

Envíanos un correo electrónico
message