AVR 500

AVR 500

Audio/Video Receiver With Dolby Digital & DTS (80 watts x 2 | 70 watts x 5)

Vendido desde 1999 hasta 2000

Producto predecesor: AVR 65
Producto sucesor: AVR 510
Hecho en: Hong Kong

Documentos y descargas

Especificaciones del producto

Power Requirements
120V AC/60Hz
Power Consumption
78W idle, 694W maximum (2 channels driven)
Surround System Adjacent Channel Separation
Pro Logic Decoding... 40dB
Surround System Adjacent Channel Separation
Dolby Digital... 55dB
Surround System Adjacent Channel Separation
DTS... 55dB
MSRP U.S.
$899.95 each
Surround Modes
Dolby Digital, DTS surround, Harman's VMAx
Digital Inputs (coaxial/optical)
4
Digital Output
2
Dimensions (H x W x D)
Width 17-5/16 inch (440mm)
Dimensions (H x W x D)
Height 6-1/2 inch (165mm) Height measurement includes feet and chassis.
Dimensions (H x W x D)
Depth 17-1/8 inch (435mm) Depth measurement includes knobs, buttons and terminal connections.
Weight
34lbs ( 15.5kg)
Television Format
NTSC
Input Level/Impedance
1Vp-p/75ohms
Output Level/Impedance
1V/75 ohms
Video Frequency Response
10Hz – 8MHz
Frequency Range
AM... 520 – 1710kHz
Frequency Range
FM... 87.5 – 108MHz
Signal-to-Noise Ratio
AM... 45dB
Usable Sensitivity
FM... IHF 1.3mu;V/13.2dB
Signal-to-Noise Ratio
FM... 70dB Mono ( measured at amV RF Input Level)
Usable Sensitivity
AM... Loop 500µV
Distortion
AM... 1kHz, 50% Mod 0.8%
Signal-to-Noise Ratio
FM... 68dB Stereo ( measured at amV RF Input Level)
Distortion (Mono/Stereo)
FM... 0.3%/0.3%
Selectivity
AM... ± 10kHz, 30dB
Stereo Separation
FM... 40dB @1kHz
Selectivity
FM... ± 400kHz, 65dB
Image Rejection
FM... 80dB
IF Rejection
FM... 90dB
Tuner Output Level
FM... 1kHz, ±75kHz Dev 500mV
Continuous Average Power (FTC) per Channel (stereo mode)
80 watts per channel @<0.07% THD, 20Hz – 20kHz, both channels driven into 8 ohms
Continuous Average Power (FTC) per Channel (surround modes)
70 watts per channel @<0.07% THD, 20Hz – 20kHz, all channels driven into 8 ohms
High Instantaneous Current Capability (HCC)
± 45 Amps
Input Level/Impedance
200mV/47k ohms - Linear (High-Level)
Signal-to-Noise Ratio
95dB
Frequency Response
10Hz – 100kHz (+0/-3dB @ 1 watt)
Transient Intermodulation Distortion (TIM)
Not Measurable
Rise Time
16µsec
Slew Rate
40V/µsec

High-Current (+/-45 Amps), Utrawide-Bandwidth (10Hz-100kHz) Amplifier Design. Dolby Digital and DTS Surround-Sound Processing Using Advanced Crystal DSP Engine. Harman Kardon Exclusive Logic 7 Cinema and Music Surround-Sound Processing. Prior season's model.

¿No encuentras lo que buscas?

Llámanos

Llámanos

Habla con un experto sobre nuestros productos
Llámanos a este número: 55-5328-1023

Lunes - Viernes: 09:00 AM -06:00 PM (Hora Centro)

Envíanos un correo electrónico

Envíanos un correo electrónico

¡Estamos aquí de lunes a viernes para responder sus correos lo antes posible!

Envíanos un correo electrónico
message