Descripción general de la asistencia / Audio en Casa / Receptores - Digital / Receptores - Tubo / AVR 7200

AVR 7200

Audio/Video Receiver With Dolby Digital & DTS (115 watts x 2 | 100 watts x 7)

Vendido desde 2003 hasta 2003

Producto predecesor:	AVR 8000
Producto sucesor:	AVR 7300
Hecho en:	China

Documentos y descargas

Guía de inicio rápido

Quick Start Guide (English) 391.81 KB

Otros

Packaging and Accessories (English) 281.03 KB

Especificaciones del producto

Características generales

Power Requirements: 120V AC/60Hz

Power Consumption: 120W @ idle, 1,040W @ rated output (7 channels driven)

MSRP U.S.: $1999.95 each

Características Audio

Continuous Average Power (FTC) per Channel (stereo mode): 115 Watts per channel @ <0.07% THD, 20Hz – 20kHz, both channels driven into 8 ohms

Front L & R Channels: 100 Watts per channel @ <0.07% THD, 20Hz – 20kHz into 8 ohms

Center Channel: 100 Watts @ <0.07% THD, 20Hz – 20kHz into 8 ohms

Surround Channels (L & R Side, L & R Back): 100 Watts per channel @ <0.07% THD, 20Hz – 20kHz into 8 ohms

Input Level/Impedance: 200mV/47k ohms - Linear (High-Level)

Signal-to-Noise Ratio: 95dB (IHF-A)

Surround System Adjacent Channel Separation:

Dolby Pro Logic I and II: 40dB

Dolby Digital: 55dB

DTS: 55dB

Frequency Response: 10Hz – 100kHz (+0/-3dB @ 1 watt)

Transient Intermodulation Distortion (TIM): Unmeasurable

Slew Rate: 40V/µsec

Medidas

Width: 17.3 inch (440mm)

Height: 7.6 inch (194mm)

Depth: 2.5 inch (521mm)

Weight: 59.1 lb (26.9kg)

Dimensions:

Especificaciones de vídeo

Television Format: NTSC

Input Level/Impedance: 1Vp-p/75 ohms

Output Level/Impedance: 1V/75 ohms

Composite and S-Video: 10Hz – 8MHz (–3dB)

Component Video: 10Hz – 50MHz (–3dB)

Tuner Specifications

Frequency Range: AM... 520 – 1710kHz

Frequency Range: FM... 87.5 – 108.0MHz

Signal-to-Noise Ratio: AM... 45dB

Usable Sensitivity: FM... IHF 1.3µV/13.2dBf

Signal-to-Noise Ratio: FM... Mono/Stereo 70dB/68dB

Usable Sensitivity: AM... Loop 500µV

Distortion: AM... 1kHz, 50% Mod. 0.8%

Distortion: FM... Mono/Stereo 0.2%/0.3%

Selectivity: AM... ± 10kHz, 30dB

Stereo Separation: FM... 40dB @ 1kHz

Selectivity: FM... ± 400kHz, 70dB

Image Rejection: FM... 80dB

IF Rejection: FM... 90dB

Amplifier Specifications

High Instantaneous Current Capability (HCC): ± 75 Amps

The AVR 7200's seven-channel, high-current, ultrawide-bandwidth amplifier is the most powerful ever in a Harman Kardon receiver. A comprehensive bass management system with Triple Crossover selection makes certain that low-frequency sound goes to the right place no matter what type of speakers you own or input you use, including DVD-Audio or SACD. Multiroom options range from assignable rear-channel amplifiers to an A-BUS Ready port, which allows complete remote-room control and amplification with only one Cat. 5 wire connection. A preprogrammed remote with an LCD display and EzSet;, an RS-232 port and a complete range of surround processing options all contribute to the AVR 7200's spectacular music and home theater performance.