SA1000

SA1000

8 Ohms per speaker output

Documentos y descargas

Especificaciones del producto

Rated Output Power (RMS) into the minimum impedance of 4 ohms
700 Watts (350W per Subwoofer)
Peak Power
1500 Watts (750W per Subwoofer)
Rated Impedance
8 Ohms per speaker output
Minimum Load Impedance
4 Ohm
Model-Specific EQ 1
Only for Revel B28C; 2
Input Sensitivity to 1W @ 50HZ
16.3mVrms +/- 1dB (Single input driven) Gain = 41.7dB
Input Overload (Both Inputs Driven)
2.0Vrms
Input Impedance
>10K Ohms
Low Pass Crossover Range
50-150Hz
Auto Turn On Input Sensitivity @ 50Hz
Typical 10mV
THD+N At 1W
<0.3%
THD+N At Rated Output Power
<1%
Signal-to-Noise Ratio To 1W
>65dBA
Minimum AC Mains Power Requirements Model
700W, 5A – 100-120VAC-50-60Hz
Minimum AC Mains Power Requirements Model
700W, 3A – 230VAC-50-60Hz
Power Consumption (Standby)
0.5W
Height
3.50in (88.90mm)
Width
17in (431.8mm)
Depth
11.04in (280.3mm)
Weight
14 lb (6.35kg)
Rated Output Power (RMS) into the minimum impedance of 4 ohms
700 Watts (350W per Subwoofer)
Peak Power
1500 Watts (750W per Subwoofer)
Rated Impedance
8 Ohms per speaker output
Minimum Load Impedance
4 Ohm
Model-Specific EQ 1
Only for Revel B28C; 2
Input Sensitivity to 1W @ 50HZ
16.3mVrms +/- 1dB (Single input driven) Gain = 41.7dB
Input Overload (Both Inputs Driven)
2.0Vrms
Input Impedance
>10K Ohms
Low Pass Crossover Range
50-150Hz
Auto Turn On Input Sensitivity @ 50Hz
Typical 10mV
THD+N At 1W
<0.3%
THD+N At Rated Output Power
<1%
Signal-to-Noise Ratio To 1W
>65dBA
Minimum AC Mains Power Requirements Model
700W, 5A – 100-120VAC-50-60Hz
Minimum AC Mains Power Requirements Model
700W, 3A – 230VAC-50-60Hz
Power Consumption (Standby)
0.5W
Height
3.50in (88.90mm)
Width
17in (431.8mm)
Depth
11.04in (280.3mm)
Weight
14 lb (6.35kg)

SA1000

The SA1000 is a custom amplifier solution, optimized for the highest level of performance and reliability. This rackmount amplifier includes user features on the front panel, and a custom installer focused feature set on the rear panel. As part of Revel's in-wall subwoofer system, this rack mountable Class D component is designed to power the B28W in-wall subwoofer. The SA1000 single channel, rack mount amplifier has two outputs in parallel, so you can power one B28W subwoofer module with 350W RMS (750W Peak). When a second B28W subwoofer module is connected to the second output of the SA1000 amplifier, the total output power increases to 700W RMS (1500W Peak). This complete in-wall subwoofer solution with external rack mountable amplifier is designed to complement Revel’s high-performance architectural product portfolio. It delivers dynamic bass and lifelike realism to concealed music and home cinema systems resulting from Revel’s advanced engineering prowess, and comprehensive subjective and objective measuring tests.

¿No encuentras lo que buscas?

Llámanos

Llámanos

Habla con un experto sobre nuestros productos
Llámanos a este número: 55-5328-1023

Lunes - Viernes: 09:00 AM -06:00 PM (Hora Centro)

Envíanos un correo electrónico

Envíanos un correo electrónico

¡Estamos aquí de lunes a viernes para responder sus correos lo antes posible!

Envíanos un correo electrónico
message