W228Be

W228Be

Dual 8-inch (200mm) 3-way In-wall Loudspeaker

Documentos y descargas

Especificaciones del producto

Model
W228Be
Description
Dual 8" (200mm) 3-way In-wall Loudspeaker
High Frequency Transducer
1" (25mm) Beryllium dome with dual ceramic-magnets and acoustic lens waveguide
Midrange Frequency Transducer
5.25" (130mm) Deep Ceramic Composite (DCC) Aluminum Cone Mid-range
Low Frequency Transducer
2x 8" (200mm) Deep Ceramic Composite (DCC) Aluminum Cone Woofers
Recommended Amplifier Power (RMS)
50-400 Watts @ 4 ohms
Frequency Response (-6dB on-axis)
35-40 kHz
Sensitivity (2.83V@1m)
90 dB
Maximum SPL
115 dB
Impedance (Nominal / Minimum)
6 Ohms / 4 Ohms
Crossover Frequency
220 Hz,2500 Hz
Crossover Type / Slope
4th order and 3rd order
Controls
High Frequency Level - Flat / Attenuated
Input Type
Gold-plated Spring-Loaded Binding Posts
Mounting Type
Revel Cat Claw Mounting System
Compatible Wall Thickness Range
Min 0.4" (10mm) / Max 1.0" (25mm)
Cutout Dimension(s)
35.3" x 12.2" (896mm x 309mm)
Mounting Depth
3.8" (96.4mm)
Enclosure Volume Range
1650 in3 (27L) to 3300 in3 (54L)
Net Dimensions with grille (HxWxD)
37.0" x 13.9" x 4.1" (938.6mm x 352.9mm x 104.5mm)
Net Weight (Speaker + Grille)
31.5 lb (14.3kg)
Shipping Dimensions (HxWxD)
45.0" x 17.3" x 10.0" (1142mm x 440mm x 255mm)
Shipping Weight
40.6 lb (18.4kg)
Packed As (Each / Pair)
Each
UPC Code
050667380144
EAN Code
1200130003608

Dual 8-inch (200mm) 3-way In-wall Loudspeaker

Sharing the same architecture as the award-winning Revel PerformaBe F228Be floor standing loudspeaker, the W228Be delivers unmatched audio performance in an in-wall design. The dual 8-inch (200mm) Deep Ceramic Composite (DCC) Aluminum Cone Woofers provide plenty of bass extension that blends seamlessly with the 5.25-inch (130mm) midrange and 1-inch (25mm) Beryllium dome tweeter. The midrange and tweeter are enclosed in a rotatable enclosure allowing for the W228Be to be used vertically as a center channel without affecting the acoustic performance. A zero-bezel magnetically attached and paintable grille allows the W228Be to blend into any décor and with elements including Beryllium Tweeters with Acoustic Waveguides and Patented Revel DNA it is sure to deliver unparalleled detail and a cohesive soundstage. At the heart of the W228Be is a 1-inch (25mm) Beryllium dome tweeter driven by dual ceramic-magnets. The powerful tweeter and 5th-generation ceramic-coated, cast-aluminum Acoustic Lens waveguide seamlessly integrate with the directivity of the companion midrange driver resulting in greater efficiency, improved dynamic range, reduced distortion, and increased power handling compared to aluminum or titanium tweeters. The 5.25-inch (130mm) midrange and dual 8-inch (200mm) aluminum cone woofers utilize Deep Ceramic Composite (DCC) cones for improved performance. DCC is a plasma electrolytic oxidation process that uses a plasma discharge to create a coarse ceramic coating on both sides of the aluminum core. The deep ceramic layers sandwiching the aluminum core provide constrained layer damping that push cone breakup modes outside of the passband allowing the driver to maintain ideal pistonic motion throughout its range. DCC cones combine with optimized motor magnetics to deliver improved mid- and low-frequency performance. Revel PerformaBe crossover networks utilize all film capacitors and air core inductors in the midrange and tweeter circuits. These premium components allow Revel's world-class engineers to extract nuances and details from music that would otherwise be lost. Combined with traditional Revel high-order crossover slopes and proprietary Acoustic Lens waveguide geometry, transducer integration is seamless.

¿No encuentras lo que buscas?

Llámanos

Llámanos

Habla con un experto sobre nuestros productos
Llámanos a este número: 55-5328-1023

Lunes - Viernes: 09:00 AM -06:00 PM (Hora Centro)

Envíanos un correo electrónico

Envíanos un correo electrónico

¡Estamos aquí de lunes a viernes para responder sus correos lo antes posible!

Envíanos un correo electrónico
message