ERS 110DT

ERS 110DT

2-Way 6-1/2 inch Round In-Ceiling Speaker with Dual Tweeters

Documentos y descargas

Especificaciones del producto

Tweeters
Dual 3/4" CMMD
Total Power
130 Watts
Sensitivity
88dB
Finish
White
Technology
CMMD
Frequency Response
47Hz – 22kHz (±3dB) 35Hz (-10dB)
Recommended Amplifier Power (RMS)
10 – 125 watts
Sensitivity (2.83 volts @ 1 meter)
88dB, both channels driven
Nominal Impedance
8 ohms per input
Crossover Frequency(ies)
2,400Hz; 12dB/octave
Low-Frequency Transducer (Woofer)
6-1/2 inch (165mm) CMMD&#153 Dual voice coil
High-Frequency Transducer (Tweeter)
Dual 3/4 inch (19mm) CMMD
Optional Accessories
Rough-In Frame... IW6R RIF
MSRP U.S.
$299.95 each
Speaker Crossover Frequencies
2,400Hz; 12dB/octave
Speaker Sensitivity
88 dB
Speaker Frequency Response
47Hz - 22kHz (±3dB) 35Hz (-10dB)
Speaker Nominal Impedance
8 ohms
Speaker Maximum Recommended Amplifier Power
125 W
Subwoofer Height (in)
9/3/2016
Speaker Weight (kg)
1.8
Subwoofer Weight (kg)
1.8
Speaker Weight (lb)
4
Subwoofer Weight (lb)
4
Subwoofer Height (mm)
233
Speaker Depth (in)
9/3/2016
Speaker Depth (mm)
233
Mounting Depth
3-1/2 inch (89mm)
Weight
4 lb (1.8kg)
Dimensions
Diameter... 9-3/16 inch (Dia.); (233mm)
Cutout Dimensions
Diameter... 7-7/8 inch (200mm)

The ERS 110DT is a round 2-way, dual voice coil, dual tweeter in-ceiling stereo speaker for use in a wide variety of applications, from stereo and whole-house music systems to complete home theaters. This speaker is perfect for applications where stereo sound is required but there is only space for a single speaker. The ERS 110DT incorporates Infinity's patented Ceramic Metal Matrix Diaphragm (CMMD;) technology to eliminate unwanted resonances and deliver clear, undistorted sound. The ERS 110DT also incorporates a proprietary waveguide design to ensure smooth distribution of sound throughout the listening area. The white grilles and frames are paintable and allow the speakers to blend into any decor.

Ceramic Metal Matrix Diaphragms reveal all the nuances of today’s music and film recordings by virtually eliminating unwanted resonances. The key is a ceramic compound called alumina. Three times as stiff as titanium – and 85 times stiffer than felted paper – alumina is deepanodized to an aluminum core to create a three-layer sandwich. CMMD adds bass impact to each ERS model, and delivers open, detailed and clean mid and high frequencies.
The ERS models feature mounting clamps that swing out to securely grip your wall from the inside. Because they need not be mounted to a stud, the ERS speakers can be placed for optimal sonic performance and installation ease.
Optional rough-in frames are available for use in new-construction installations before drywall is installed

¿No encuentras lo que buscas?

Llámanos

Llámanos

Habla con un experto sobre nuestros productos
Llámanos a este número: 55-5328-1023

Lunes - Viernes: 09:00 AM -06:00 PM (Hora Centro)

Envíanos un correo electrónico

Envíanos un correo electrónico

¡Estamos aquí de lunes a viernes para responder sus correos lo antes posible!

Envíanos un correo electrónico
message