Support Overview / Revel / Speakers / Architectural / C363DT

C363DT

6-1/2" Dual-Tweeter In-ceiling Loudspeaker

Getting started with your C363DT

Documents & Downloads

Manuals

Owner's Manual (EN) 3.55 MB

Other

Product Brochures (EN) 580.42 KB

Product Specifications

General Specifications

Height: Cutout dimensions (dia) 8" (20.3 cm) Square grille finished height

Width: Square grille finished height

Depth: Mounting depth

Weight: 1.9 lb (0.9 kg) / Shipping Weight

Features: Includes both round and square zero-bezel magnetic grilles • Round grille finished dimension (dia.)

High-frequency Driver Components: Two 1" aluminum dome tweeters with waveguides

Low-frequency Driver Components: 6 ½" Micro-Ceramic Composite (MCC) Cone, Cast-polymer Frame Woofer

Mounting: C-2 fastening mechanism • Compatible with wall material thickness range

Recommended Amplifier Power: 10 - 120 Watts RMS (per channel)

C363DT

Revel in-ceiling loudspeakers draw upon the same research, resources, and unique perspectives that put all our loudspeakers in a class by themselves. Each model offers a standard-setting low sonic coloration and freedom from distortion over a wide dynamic range.

FAQs & How-Tos

5 results

Sort

Page size

Can I use an in-ceiling speaker as an in-wall unit or vice versa?

No, in-ceiling speakers cannot be used in the wall due to speaker dimensions. A wall is not deep enough to accommodate the depth of an in-ceiling speaker. For in-wall speakers, you can install them in the ceilings without any depth issues. However, for quality listening, we recommend using architectural speakers according to their intended purpose.

Was this helpful? Thank you for your feedback!
Is it safe to only connect one input on the Revel C363DT or C563DT?

No, it is not recommended to connect only one input on our Dual Tweeter models. These models are built using Dual Voice Coil woofers and driving only one half of the motor structure is not healthy for the speaker and will shorten its life expectancy.

Was this helpful? Thank you for your feedback!
What is the purpose of having dual tweeters on a speaker?

Speakers will dual tweeters gives listeners the ability to have a single speaker to drive two independent channels, ideally stereo left and right. Dual tweeter speakers are usually used for in-ceiling audio applications. They have four terminals (two sets of positives and negatives) used to plug in speaker wires from the amplifier.

Was this helpful? Thank you for your feedback!
What works better for stereo listening, in-wall or in-ceiling speaker?

In-wall speakers will work better for stereo listening because the speaker will be facing directly at you instead of above you. Note: Stereo imaging requires the listening position (“sweet spot”) to be dead center, equal distance, from the front left and right speakers.

Was this helpful? Thank you for your feedback!
Which is superior, in-wall/in-ceiling speaker(s) with or without a back-box?

All of our in-wall/in-ceiling speakers are designed to be used in a wall without the need for a back-box. The specs provided are based on no back-box. However, when adding a back-box (really only possible when doing new construction), you will improve the low frequency response a bit, getting a tighter bass response.

Was this helpful? Thank you for your feedback!