SDA-1700
Class D Subwoofer Amplifier
Документы; Загрузки
Спецификации
- Rated Output Power (RMS) into the minimum impedance of 4 Ohms
- 700Watts
- Peak power
- 1500W
- Rated impedance
- 8Ohms per speaker output
- Minimum load impedance
- 4Ohms
- Model-Specific EQ 1
- Only for JBL SYNTHESIS SSW-4
- Model-Specific EQ 2
- Only for JBL C82W
- Input Sensitivity to 1W @ 50Hz
- 16.3mVrms +/- 1dB (Single input driven) Gain=41.7dB
- Input Overload (Both inputs driven)
- ≥ 2.0Vrms
- Input Impedance
- > 10K Ohms
- Low Pass Crossover range
- 50-150Hz
- Auto Turn On Input Sensitivity @ 50Hz
- Typical 10mV
- THD+N at 1W
- < 0.3%
- THD+N at Rated Output Power
- < 1%
- Signal-to-Noise ratio to 1W
- > 65dBA
- Minimum AC Mains power requirements
- 100-120VAC-50-60Hz Model
- Power consumption (Standby)
- 0.5W
- Height
- 3.50in (88.90mm)
- Width
- 17in (431.8 mm)
- Depth
- 11.04in (280.3mm)
- Weight
- 14Lb (6.35Kg)
The SDA-1700 is a custom amplifier solution, optimized for the highest level of performance and reliability. This rackmount amplifier includes user features on the front panel, and a custom installer focused feature set on the rear panel. As part of JBL Synthesis custom in-wall subwoofer system, this rack mountable Class D component is designed to power the SSW-4 in-wall subwoofer.