SCL-5

Спецификации

Общее

Type: 2-Way In-ceiling loudspeaker

Low Frequency Driver: 7” (180 mm) advanced Aluminum Matrix cone cast-frame woofer (JW180PB-6)

High Frequency Driver: 1" (25 mm) 2409H Teonex annular ring-diaphragm compression driver

Recommended Amplifier Power: 25 – 125W RMS

Impedance: 6 Ohm

Loudspeaker Sensitivity: 86 dB/2.83V/1m (2pi anechoic)

Frequency Response: 48Hz - 32kHz (-6 dB on-axis), 2pi anechoic

Crossover Frequency: 1575 Hz

High Frequency Coverage Angle (-6 dB): 60-degree Vertical (Up

Enclosure Type: Open back

Controls: Boundary Proximity Control

Grille Dimensions: Round - 12.5" (318 mm) diam.

Grille Dimensions: Square - 12.5" (318 mm) x 12.5" (318 mm)

Product Dimensions (with grille): 12.5" H x 12.5" W x 5.98" D (318 mm x 318 mm x 151.9 mm)

Cut-out Diameter: 11.2" (285 mm)

Accessory Rough-in Bracket: CB10

Mounting Depth: 5.58" (141.8 mm)

Input Type: Gold-plated spring-loaded binding posts

Product Weight: 8.6 lb. (3.9 kg), 9.2 lb. (4.2 kg) with one grille

Shipping Weight: 12.5 lb. (5.7 kg)

Shipping Units of Measure: Each

Warranty: 5 Years

Аудио

2-way in-ceiling loudspeaker system

6.5-inch (165mm) Cast-frame, advanced aluminum matrix Cone with low-distortion neodymium motor structure

D2-derived 1-inch / 25mm D2409H annular ring, Teonex® diaphragm compression driver

High-Definition Imaging (HDI™) waveguide

Retractable Cat Claws mounting system for easy installation

Hi Frequency Level and Boundary Compensation switches

Rotatable, angled baffle

Metal back can be integrated with system

Sealed / acoustic suspension design

Gold plated, spring-loaded, push type binding post terminals

Zero-bezel, magnetically attached round and square grilles

The SCL-5 is the highest performance traditional round in-ceiling model in the JBL Synthesis Custom Loudspeaker (SCL) series. It is designed for use as a height channel or in-ceiling LCR or surround channel loudspeaker. The SCL-5 features JBL’s patented 2409H 1-inch (25mm) compression driver mated to an offset High Definition Imaging (HDI™) horn. This patented horn design is integrated with an angled 7-inch (180mm) Advanced Aluminum Matrix cone cast-frame woofer operating behind an acoustic aperture waveguide. The innovative configuration yields incredibly smooth and consistent performance for off-axis placement up to 60 degrees from the listening position. The SCL-5 is acoustically designed to match any of the JBL Synthesis Custom Loudspeakers (SCL series) as part of a complete JBL Synthesis immersive audio solution. It is ideal for use in medium to large rooms.