Dokument och hämtningar
Produktspecifikationer
- Power Requirements
- 120V AC/60Hz
- Power Consumption
- 72W idle, 290W maximum (2 channels driven)
- Surround System Adjacent Channel Separation
- Pro Logic Decoding... 40dB
- Surround System Adjacent Channel Separation
- Dolby Digital... 55dB
- Frequency Response
- 10Hz – 100kHz (+0/-3dB @ 1 watt)
- Transient Intermodulation Distortion (TIM)
- 0.08%
- Rise Time
- 16µsec
- Slew Rate
- 40V/µsec
- MSRP U.S.
- $499.95 each
- Television Format
- NTSC
- Input Level/Impedance
- 1Vp-p/75 ohms
- Output Level/Impedance
- 1V/75 ohms
- Video Frequency Response
- 10Hz – 8MHz (-3dB)
- Frequency Range
- AM... 520 – 1710kHz
- Frequency Range
- FM... 87.5 – 108MHz
- Signal-to-Noise Ratio
- AM... 35dB
- Usable Sensitivity
- FM... IHF 1.5µV/14.8dB
- Signal-to-Noise Ratio
- FM... 73dB Mono ( measured at amV RF Input Level)
- Usable Sensitivity
- AM... Loop 800µV
- Distortion
- AM... 1kHz, 50% Mod 1.5%
- Signal-to-Noise Ratio
- FM... 70dB Stereo ( measured at amV RF Input Level)
- Distortion (Mono/Stereo)
- FM... 0.3%/0.5%
- Selectivity
- AM... ± 10kHz, 30dB
- Stereo Separation
- FM... 40dB @1kHz
- Selectivity
- FM... ± 400kHz, 60dB
- Image Rejection
- FM... 40dB
- IF Rejection
- FM... 100dB
- Tuner Output Level
- FM... 1kHz, ±75kHz Dev 500mV
- Continuous Average Power (FTC) per Channel (stereo mode)
- 50 watts per channel @ <0.07% THD, 20Hz – 20kHz, both channels driven into 8 ohms
- Continuous Average Power (FTC) per Channel (surround modes)
- 40 watts per channel @ <0.07% THD, 20Hz – 20kHz, all channels driven into 8 ohms
- High Instantaneous Current Capability (HCC)
- ± 25 Amps
- Input Level/Impedance
- 250mV/47k ohms - Linear (High-Level)
- Signal-to-Noise Ratio
- 90dB
Bilder och videor
Hittade du inte det du sökte efter?
Ring oss
Ring oss på:
+46 850512632
Måndag – fredag: 09:00-17:00
Skicka e-post till oss
Vi är här måndag-fredag för att svara på ditt mejl så fort vi kan!
Chatta med oss
Chatta på engelska:
Måndag – fredag: 09:00-18:00
Lördag – söndag: 10:00-16:00