AVR 45

AVR 45

Audio/Video Receiver With Dolby Digital (65 watts x 2 | 55 watts x 5)

Såld från 1998 tills 1999

Föregående produkt: AVR 40
Efterträdande produkt: AVR 210
Tillverkade i: Hong Kong

Dokument och hämtningar

Produktspecifikationer

Power Requirements
120V AC/60Hz
Surround System Adjacent Channel Separation
Pro Logic Decoding... 40dB
Power Consumption
72W idle, 332W maximum (2 channels driven)
Surround System Adjacent Channel Separation
Dolby Digital... 55dB
Frequency Response
8Hz – 80kHz (+1/-3dB @ 1 watt)
Transient Intermodulation Distortion (TIM)
Not Measurable
Rise Time
16µsec
Slew Rate
40V/µsec
MSRP U.S.
$899.95 each
Front L & R Channels
55 watts per channel, @ 0.07% THD, 20Hz – 20kHz into 8 ohms
Center Channel
55 watts per channel, @0.07% THD, 20Hz – 20kHz into 8 ohms
Rear Channels:
55 watts per channel, @0.07% THD, 20Hz – 20kHz into 8 ohms
Dimensions (H x W x D)
Width 17-1/3 inch (440mm)
Dimensions (H x W x D)
Height 6-1/2 inch (165mm) Height measurement includes feet and chassis.
Dimensions (H x W x D)
Depth 17-1/10 inch (435mm) Depth measurement includes knobs, buttons and terminal connections.
Weight
25lbs ( 13.2kg)
Television Format
NTSC
Input Level/Impedance
1Vp-p/75 ohms
Output Level/Impedance
1V/75 ohms
Video Frequency Response
10Hz to 8MHz (-3dB)
Frequency Range
AM... 520 – 1710kHz
Frequency Range
FM... 87.5 – 108MHz
Signal-to-Noise Ratio
AM... 45dB
Usable Sensitivity
FM... IHF 1.3µV/13.2dBf
Signal-to-Noise Ratio
FM... 70dB Mono ( measured at amV RF Input Level)
Usable Sensitivity
AM... Loop 500µV
Distortion
AM... 1kHz, 50% Mod 0.8%
Signal-to-Noise Ratio
FM... 68dB Stereo ( measured at amV RF Input Level)
Distortion (Mono/Stereo)
FM... 0.3%/0.5%
Selectivity
AM... ± 10kHz, 30dB
Stereo Separation
FM... 40dB @1kHz
Selectivity
FM... ± 400kHz, 65dB
Image Rejection
FM... 80dB
IF Rejection
FM... 90dB
Tuner Output Level
FM... 1kHz, ±75kHz Dev 500mV
Continuous Average Power (FTC) per Channel (stereo mode)
65 Watts per channel 20Hz – 20kHz... @<0.07% THD, both channels driven into 8 ohms
High Instantaneous Current Capability (HCC)
± 35 Amps
Input Level/Impedance
200mV/47k ohms - Linear (High-Level)
Signal-to-Noise Ratio
95dB

Advanced Dolby Digital Performance at a moderate price. The AVR 45 offers HCC capability and Ultrawide Bandwidth design, and the advanced Crystal Circuit for extraordinary performance, rivaled only by top of the line conventional receivers. Prior season's model.

Hittade du inte det du sökte efter?

Ring oss

Ring oss

Ring oss på: +46 850512632

Måndag – fredag: 09:00-17:00

Skicka e-post till oss

Skicka e-post till oss

Vi är här måndag-fredag för att svara på ditt mejl så fort vi kan!

Skicka e-post till oss
Chatta med oss

Chatta med oss

Chatta på engelska:
Måndag – fredag: 09:00-18:00
Lördag – söndag: 10:00-16:00

message

WhatsApp oss

WhatsApp-support endast på engelska

Skicka ett meddelande till oss på engelska här 

Måndag – fredag: 09.00-18.00
Lördag – söndag: 10:00-16:00