STUDIO L226W

STUDIO L226W

2-Way 6-1/2 inch In-Wall Speaker

Såld från 2007 tills nu

Föregående produkt: HTI 6
Tillverkade i: China

Komma igång med din $produkt

Product Registration

Registrera din produkt

Äger du den här produkten? Registrera dig här! Och gör anspråk på din garanti eller service på ett enkelt sätt

Registrera nu

Dokument och hämtningar

Produktspecifikationer

Series
Studio L In-Wall/In-Ceiling
MSRP U.S.
$259.95 each
Nominal Impedance
8 ohms
Crossover Frequencies
3000Hz; 24dB/Octave
Frequency Response
30Hz – 20kHz
Sensitivity
(2.83V@1m) 89dB
Mounting Depth (mm)
90
External Height (in)
11
Mounting Cutout Height (mm)
241
Weight (lb)
3.5
External Width (in)
8-1/2
Mounting Cutout Width (mm)
178
Mounting Cutout Width (in)
7
External Height (mm)
280
External Width (mm)
216
Mounting Cutout Height (in)
9-1/2
Weight (kg)
1.6
High-Frequency Transducer
1" (25mm)
Low-Frequency Transducer
6-1/2" (165mm)

Sonic power from your walls.

The L226W a 2-way in-wall speaker for use in a wide variety of applications, from stereo and whole-house music systems to complete home theaters. The L226W features an aluminum woofer and titanium-laminate tweeter to deliver accurate performance with dramatically reduced distortion for incredibly realistic sound. The L226W also incorporates JBL's proprietary EOS waveguide to ensure smooth distribution of sound throughout the listening area. The tweeter level control allow for optimum high-frequency performance in any room and installation location. The white grilles and frames are paintable and allow the speakers to blend into any decor.

JBL engineers designed the L226W in-wall loudspeaker to produce impressive, full-range sound from an AVR (audio/video receiver) or amplifier capable of delivering up to 125 watts of power.
Realistic reproduction of music requires clean, undistorted low frequencies. JBL L226W in-wall loudspeakers feature a 6-1/2-inch (165mm) aluminum cone that not only delivers deep, room-filling bass with low distortion but also anchors an extended frequency response. The result is enveloping, satisfying audio reproduction from the bottom up.
The L226W’s thin but rigid 1-inch (25-millimeter) titanium tweeter delivers accurate, clear high-frequency response, even at high volume levels. An independent level control lets you optimize its high-frequency performance.
Forget about “sweet spots.” With proprietary JBL Elliptical Oblate Spheroidal (EOS) waveguide technology, your whole room becomes a perfect listening position. Originally designed for JBL Professional LSR studio monitors, the L226W in-wall loudspeaker’s EOS waveguide distributes sound evenly throughout your playback area.
With a mounting depth of just 3-9/16 inches (90 millimeters) and weighing only 3.5 pounds (1.6 kilograms), the lightweight, space-saving JBL L226W loudspeakers offer maximum installation flexibility. A cutting template and integrated dog-ear brackets accommodate retrofit applications, while rough-in frames are available for new construction.
JBL L226W in-wall loudspeakers offer outstanding performance, but that doesn’t mean that they have to stand out in a room! You can paint the frames and grilles so that the loudspeakers match your wall decor. You’ll hardly notice your L226Ws – until you turn them on.

Hittade du inte det du sökte efter?

Ring oss

Ring oss

Ring oss på: +46 850512632

Måndag – fredag: 09:00-17:00

Skicka e-post till oss

Skicka e-post till oss

Vi är här måndag-fredag för att svara på ditt mejl så fort vi kan!

Skicka e-post till oss
Chatta med oss

Chatta med oss

Chatta på engelska:
Måndag – fredag: 09:00-18:00
Lördag – söndag: 10:00-16:00

message

WhatsApp oss

WhatsApp-support endast på engelska

Skicka ett meddelande till oss på engelska här 

Måndag – fredag: 09.00-18.00
Lördag – söndag: 10:00-16:00