Support Overview / Speakers / Bluetooth / Wireless / JBL PartyBox 1000
JBL PartyBox 1000

JBL PartyBox 1000

Powerful Bluetooth party speaker with full panel light effects

Sold from 2019 until now

Getting started with your JBL PartyBox 1000

Getting started with your JBL PartyBox 1000

Quick Start Guide

Get up and running in no time with our easy-to-follow Quick Start Guide
Product Registration

Register your product

Do you own this product? Register it here! And claim your warranty or service easily

Register now

Documents & Downloads

Product Specifications

Output power (W)
1100
Dynamic frequency response range (Hz)
30Hz-20kHz (-6dB)
Dimensions (cm)
39.7 x 39 x 105
Dimensions (in)
15.6 x 15.3 x 43.3
Weight (kgs)
34.7
Weight (lbs)
76.5
Wireless Connectivity
Bluetooth Technology
Air Gesture Wristband using BLE technology
Karaoke function
Yes
3.5 mm audio cable Input
Yes
Auto-power off
Yes
Bluetooth
Yes
Lightshow
Yes
Wireless
Yes
Note
The product is in compliance with the European Union energy legislation. 1) Bluetooth connection mode - The product is intended to be used for streaming music via Bluetooth connection. A consumer can stream Bluetooth audio to the speaker. When the product is connected through Bluetooth, the Bluetooth connection must remain active at all times to ensure proper operation. The product will enter into sleep mode (networked standby), after 20 minutes without operation, the power consumption @ sleep is less than 2.0 Watts, after which it can be re-activated via Bluetooth connection. 2) Bluetooth disconnection mode - The product will enter into standby mode, after 20 minutes without operation, the power consumption @ standby is less than 0.5 Watts.
Note
WARNING!! This product contains a button/coin cell battery and is hazardous. Keep batteries away from children. Batteries can cause severe or fatal injuries in 2 hours or less if swallowed or placed inside any part of the body. Medical attention should be sought immediately if it is suspected the battery has been swallowed or placed inside any part of the body.

The Ultimate Party Machine!

The JBL PartyBox 1000 is a powerful party speaker with JBL sound quality and exciting full panel light show. Just plug in your Mic or Guitar and take the stage or stream your playlist via Bluetooth or from a USB stick. The LED lit DJ and Party Band bring concert to your party! Connect two PartyBox speakers wirelessly with the TWS feature or wired from one RCA output to another RCA input. Let's get the party started!

JBL offers unprecedented performance and authentic audio experiences you will remember for your party!
The full panel lighting effect create a captivating light show to astound your crowd with a lasting visual experience.
Air gesture wristband brings everyone together!
This DJ Pad allows you to play drums, guitar and piano, record and loop on the fly!
Plug in your mic or guitar and take the stage.
Pre-program your party or event with your favorite playlist from a USB thumb drive!
Connect compatible speakers wirelelessly via TWS (True Wireless Stereo using Bluetooth connection up to 2 party speakers) or wired via one RCA output to another.
A USB port on the JBL PartyBox lets you charge other USB devices right from the speaker. So you don’t need an extra charger to keep your devices powered up.
A handle and concealed wheels make it easier to transport your JBL PartyBox 1000

FAQs & How-Tos

13 results
  • Connecting to your Car
    It is very simple to connect to your Car with the JBL Partybox 200 or 300. Use the included cable that connects through the cigarette connector in your Car and power on the Partybox! Please note that the 12V connection does not charge the battery in the Partybox 300 - it will only power the Partybox when in use. To charge the battery, it will have to be plugged into AC power ( 110 - 230V )
  • Does my Speaker have Speakerphone/Voice Assistant Functionality?
    This product does not feature speakerphone or voice assistant functionality as it does not have a microphone.
  • Enabling or disabling Demo mode.

    Demo mode

    1. Press the Play and Boost button at the same time for 5 seconds.
    2. Depending on what state your JBL Partybox is in, either you enter Demo mode or disabling it.
      1. NOTE: In Demo mode, you cannot use the JBL Partybox as most features and buttons are not working.
    Demo mode
  • How to create a Bluetooth connection with your mobile device

    Bluetooth Pairing

    1. Press the BT button button on the Partybox to start the pairing process.
    2. Grab your mobile device.
    3. Go to settings --> Bluetooth --> Enable Bluetooth --> BT ON
    4. Find the Partybox speaker you want to establish a Bluetooth connection to.
             BT settings
    1. You now have a successful connection and can stream your favorite music.
      1. NOTE: It is only possible to have two devices connected at the same time and if you want to listen through the second Bluetooth device then stop the current one from playing and use the second device.
      2. To stop Bluetooth broadcasting then insert a USB device.
    BT con
    1. How to find the software version

      Finding the software version

      1. Press and hold the 'Volume-' and 'Bass Boost' buttons for 5 seconds.
      2. A voice will start prompting numbers which indicates the current software version.
      PBFW_Announce.png
    2. How to play music through using a USB stick

      USB Stick

      1. Get an empty USB str stick with speed of 2.0.
      2. Make sure it is formatted with FAT16 or FAT32.
      3. Your Music files can only be: MP3 (32-320kbit/s), WMA(32-320kbit/s) and wAV(44.1K/48K/192K).
      4. The Partybox supports up to 8 subfolders.
      5. It will be played in alphabetic sequence with main folders first then subfolders.
      6. To skip songs forward, double press the Play/Pause button. To skip back, triple press the Play/Pause button.
    3. How to record sound effects.
      Please go to this Youtube address to watch an instruction video about how to record sound effects on JBL PartyBox 1000: https://www.youtube.com/watch?v=vcuIPVfnC8Q&list=PLPlXZNivfAs4mndPKnjUkB2ZggcA4cZvc&index=6&t=0s
    4. How to Reset to Factory Settings

      Resetting the Partybox to Factory Settings

      1. Press and hold "Play/Pause" and "Volume +" down for > 10 seconds.
      2. The JBL Partybox will power off and back on and is now reset.
    5. Is my Partybox Supported by the JBL Partybox App?
      This model is not supported by the JBL Partybox App.
    6. PartyBox 1000 How To Videos
      Click here for a list of How To videos about the PartyBox 1000!
    < 1 2 >

    Images & Videos

    • JBL PartyBox 1000 - Black - Powerful Bluetooth party speaker with full panel light effects - Hero
    • JBL PartyBox 1000 - Black - Powerful Bluetooth party speaker with full panel light effects - Front
    • JBL PartyBox 1000 - Black - Powerful Bluetooth party speaker with full panel light effects - Back
    • JBL PartyBox 1000 - Black - Powerful Bluetooth party speaker with full panel light effects - Left
    • JBL PartyBox 1000 - Black - Powerful Bluetooth party speaker with full panel light effects - Detailshot 1
    • JBL PartyBox 1000 - Black - Powerful Bluetooth party speaker with full panel light effects - Detailshot 3
    • JBL PartyBox 1000 - Black - Powerful Bluetooth party speaker with full panel light effects - Detailshot 4
    • JBL PartyBox 1000 - Black - Powerful Bluetooth party speaker with full panel light effects - Detailshot 5

    Can’t find what you’re looking for?

    Call Us

    Call Us

    Talk to a product expert
    Call Us now at: (877) 871-6755

    Mon - Fri: 9:00 am - 11:00 pm (ET)
    Sat - Sun: 9:00 am - 5:00 pm (ET)

    Chat with Us

    Chat with Us

    Mon - Fri: 9:00 am - 11:00 pm (ET)
    Sat - Sun: 9:00 am - 5:00 pm (ET)

    message

    Text Us

    Text with a support agent via SMS at:
    628-333-7807

    Mon - Fri: 9:00 am - 8:00 pm (ET)