Support Overview / Speakers / SoundBars / JBL Cinema SB250
JBL Cinema SB250

JBL Cinema SB250

200W home cinema soundbar with wireless subwoofer and virtual surround

Sold from 2015 until now

Getting started with your JBL Cinema SB250

Getting started with your JBL Cinema SB250

Quick Start Guide

Get up and running in no time with our easy-to-follow Quick Start Guide
Product Registration

Register your product

Do you own this product? Register it here! And claim your warranty or service easily

Register now

Documents & Downloads

Product Specifications

Frequency response
45Hz – 20kHz
Maximum SPL
100dB
Gross weight
23.1 lb (10.5kg)
Total Cinema SB250 amplifier power
200W max
Soundbar (L x W x H)
32.7" x 2.5" x 3.1" (831 x 65 x 78mm)
System Weight (kg)
2.8kg
Subwoofer Weight (kg)
4.8kg
Subwoofer (L x W x H)
9.5" x 9.5" x 12.6" (242 x 242 x 320mm)

Brings cinematic sound to any thin-profile TV

Designed to perfectly match any flat-panel TV, the JBL Cinema SB250 provides stunning, virtual surround sound from a sleek and simple package.<CRLF>It connects wirelessly to its compact, powerful subwoofer, and connects with a single cable to a TV. It can also enhance the view experience with cutting-edge wireless Bluetooth streaming features like JBL SoundShift™, which works with your TV and wireless mobile device at the same time to allow you to automatically switch between the audio from your TV and the audio from your phone or tablet. JBL Cinema SB250 can learn any TV remote volume control, giving you simplified control over your home cinema experience. A wall or table EQ switch calibrates the SB250 for any type of installation and independent volume control of the subwoofer lets you customize bass response to your personal taste.

The JBL Cinema SB250 fits any modern flat-panel TV, bringing stunning, cinematic sound.
Complete all-in-one solution with compact 6.5" (165mm) wireless subwoofer.
Simple one-cable connection to your TV with analog or optical.
Simplify your experience by using your existing TV remote control to operate your soundbar.
Works with your TV and wireless mobile device at the same time to allow you to automatically switch between the sound from your TV and the sound from your phone or tablet.
Cinematic sound with Dolby® Digital and Harman Display Surround sound.
No more loud commercials—Harman Volume keeps your sound levels consistent.

FAQs & How-Tos

24 results
  • Audio is out of sync with devices.
    Check to see if it happens with all source devices (TV, BluRay, DVD, etc.). If it only happens with one device and not the other, the issue may be with that device. Make sure you do not have any HDMI adapters or splitters. These can cause issues with video and audio.
  • Can I change the Bluetooth name for my JBL SB 250?
    Sorry, this is not possible.
  • Can I connect 2 separate devices to the SB 250 AUX and optical Inputs?
    SB 250 will only pass one connection at a time. If two connections are playing at the same time, then the optical device will take priority.
  • Can i learn additional IR codes, other than what the QSG is saying?
    We only offer volume+ and volume-, mute and power for your TV remote to learn these IR codes.
  • Does SB 250 Support AptX Codec?
    No, SBC Codec and AAC Codec are supported.
  • How do I pair an additional Bluetooth device to SB 250?
    Short-press the Bluetooth Button to open for new pairing.
  • How do I program my remote?
    1. Press and hold the surround button on the Soundbar, until the system enter "learning mode"(the LED will blink orange).
    2. VOLUME + : Press 'Volume +' on the soundbar and then press 'Volume +' on the TV remote control.
    3. VOLUME ? : Press 'Volume �' on the soundbar and then press 'Volume �' on the TV remote control.
    4. MUTE: Press 'Volume +' and 'Volume �' together on the soundbar and then press 'Mute' on the TV remote control.
    5. POWER: Power On your soundbar by pressing the 'Power' key on the soundbar and then pressing the 'Power' key on the TV remote control. Note: After each TV IR code is programmed, the blinking orange LED will turn white for 1 second. The soundbar is ready to learn the next key after the white LED disappears and the orange LED begins to blink.Press and hold the top panel 'Surround' key again to exit learning mode (the orange LED will stop blinking).
  • How many Bluetooth devices can I pair to SB 250 at one time?
    You can have several source paired, but only one active at the same time.
  • I do not get audio from my TV.
    Make sure the optical connection is seated securely on the SB250 and on your device. Go into your device settings and make sure the digital output is enabled. On TV displays the option usually states "enable external speakers" or enable "digital audio output".
  • Is it possible to reset my SB 250?
    Yes, switch the soundbar ON, then press the volume - ( minus ) and surround buttons at the same time for 5 seconds. Now the device is reset.
< 1 2 3 >

Images & Videos

  • JBL Cinema SB250 - Black - Wireless Bluetooth Home Speaker System - Hero
  • JBL Cinema SB250 - Black - Wireless Bluetooth Home Speaker System - Front
  • JBL Cinema SB250 - Black - Wireless Bluetooth Home Speaker System - Detailshot 2
  • JBL Cinema SB250 - Black - Wireless Bluetooth Home Speaker System - Detailshot 3
  • JBL Cinema SB250 - Black - Wireless Bluetooth Home Speaker System - Detailshot 4
  • JBL Cinema SB250 - Black - Wireless Bluetooth Home Speaker System - Detailshot 6
  • JBL Cinema SB250 - Black - Wireless Bluetooth Home Speaker System - Detailshot 7
  • JBL Cinema SB250 - Black - Wireless Bluetooth Home Speaker System - Detailshot 8

Can’t find what you’re looking for?

Call Us

Call Us

Talk to a product expert
Call Us now at: (877) 871-6755

Mon - Fri: 9:00 am - 11:00 pm (ET)
Sat - Sun: 9:00 am - 5:00 pm (ET)

Chat with Us

Chat with Us

Mon - Fri: 9:00 am - 11:00 pm (ET)
Sat - Sun: 9:00 am - 5:00 pm (ET)

message

Text Us

Text with a support agent via SMS at:
628-333-7807

Mon - Fri: 9:00 am - 11:00 pm (ET)
Sat - Sun: 9:00 am - 5:00 pm (ET)