SB 26
Advanced Soundbar with Bluetooth and powered wireless subwoofer
Getting started with your SB 26
Documents & Downloads
Product Specifications
- System frequency response
- 38Hz – 22kHz
- Wireless subwoofer amplifier power
- 100 watts
- Speaker Maximum Recommended Amplifier Power
- 30 watts x 2
- Subwoofer Maximum Recommended Amplifier Power
- 100 watts
- Speaker Height (mm)
- 110
- Speaker Width (mm)
- 920
- Speaker Depth (mm)
- 89
- Speaker Weight (kg)
- 3.5
- Subwoofer Height (mm)
- 365
- Subwoofer Width (mm)
- 320
- Subwoofer Depth (mm)
- 320
- Subwoofer Weight (kg)
- 9.4
- Subwoofer Low-Frequncy Transducer
- 250mm (10") down-firing cone
- Subwoofer Controls
- crossover frequency, phase
- Subwoofer_Enclosure Type
- Bass reflex
- Speaker Low-Frequency Transducer
- 2 x 89mm (3")
- Speaker High-Frequency Transducer
- 25mm (1”) tweeter domes
- Speaker Power Consumption
- less than 0.5W (standby); 230W (maximum)
Raising the bar in beautiful sound
Raising the bar in beautiful sound. The new Harman Kardon SB26 is a Soundbar custom-engineered to usher your living space into the digital age. With its 4 woofers, 2 tweeters and powerful 100W subwoofer, combined with its classic black design, the SB26 is the perfect companion to your flat screen HD television. Moreover, the new SB26 comes with all the features to fit the modern, digitalized home with key additions like HDMI and Bluetooth®, allowing easy connectivity to Smartphones and tablets (both Android and iOS) and TV remote learning, you’re never far from the future of home entertainment. With the SB26 Soundbar, Harman Kardon once again raises the bar in beautiful sound.
FAQs & How-Tos
-
Unless the two remote controls are identical, you can only assign one remote control at a time to the SB16.Was this helpful? Thank you for your feedback!
-
If you have a mesh network (more commonly seen in Eero Mesh networks), it is possible that you may experience your satellite speakers or subwoofer intermittently disconnecting from the soundbar. This is similar to normal interference that occurs with products on a similar wireless frequency. The special thing about Eero mesh networks is that they do not allow you to move a device to the 5Ghz or 2.4Ghz band. The system will automatically decide which devices should be on which band and will move them accordingly (switching whenever needed). Some of our soundbars run on a 5Ghz frequency which is where the interference can occur. Since we cannot change the signal in which they operate and we cannot change the band they are connected to via their Eero mesh network, there are a few things you can do to try and stop this from occurring.
- Move the mesh nodes far away from the soundbar
- Use the 2.4Ghz band instead of the 5Ghz band (if your mesh system allows this)
- Ensure to enable/utilize the MU-MIMO setting (not applicable to all mesh systems). Please refer to your router's website to see if MU-MIMO is being utilized by default.
What is MU-MIMO?
MU-MIMO stands for Multi-User, Multi-Input, Multi-Output. This allows for the router to send a signal to multiple devices at one time vs. the previous version in which the router would be able to connect to multiple devices, but only send the signal to one device at a time.
NOTE: You may notice that when the soundbar is turned on, there may be a dip in the immediate internet speed, but it will go back to normal within less than a minute.
Was this helpful? Thank you for your feedback!
Images & Videos
Can’t find what you’re looking for?
Call Us
Talk to a product expert
Call Us now at:
(877) 871-6755
Mon - Fri: 9:00 am - 11:00 pm (ET)
Sat - Sun: 9:00 am - 5:00 pm (ET)
Chat with Us
Mon - Fri: 9:00 am - 11:00 pm (ET)
Sat - Sun: 9:00 am - 5:00 pm (ET)