JBL Cinema SB190
2.1 Channel soundbar with Virtual Dolby Atmos and wireless subwoofer
Sold from 2022 until now
Getting started with your JBL Cinema SB190
Documents & Downloads
Product Specifications
- Power supply
- 100 - 240V AC, ~ 50/60Hz
- Total speaker power output (Max. @THD 1%)
- 380W
- Soundbar power output (Max. @THD 1%)
- 2 x 90W
- Subwoofer power output (Max. @THD 1%)
- 200W
- Standby consumption
- <0.5W
- Operating temperature
- 0°C - 45°C
- Soundbar transducer
- 2 x (48 x 90)mm racetrack driver + 2 x 1.25" tweeter
- Subwoofer transducer
- 6,5", wireless sub
- Frequency response
- 40Hz - 20kHz
- Max SPL
- 96dB
- Audio inputs
- 1 Optical, Bluetooth, USB (USB playback is available in US version. For other versions, USB is for Service only.)
- MP3 Codec
- MPEG 1 Layer 1/2/3, MPEG 2/2.5 Layer 1/2/3
- MP3 sampling rate
- 8 kHz - 48 kHz
- MP3 bitrate
- MPEG 1 Layer 1
- Dimensions (W x H x D)
- Soundbar
- Dimensions (W x H x D)
- Subwoofer
- Weight (kg):Soundbar 1.9kg
- Weight (kg):Subwoofer 5.6kg
- USB port
- Type A
- USB rating
- 5V DC/ 0.5A
- Supporting file format
- mp3
- Bluetooth version
- 5.1
- Bluetooth profile
- A2DP V1.3/ AVRCP V1.5
- Bluetooth frequency range
- 2400 - 2483.5MHz
- Bluetooth Max transmitting power
- <0dbm (EIRP)
- Bluetooth modulation
- GFSK, π/4 DQPSK
- 2.4G wireless frequency range
- 2400 - 2483MHz
- 2.4G Max. transmitting power
- 3 dBm
- 2.4G wireless modulation
- GFSK
- HDMI Video input
- 1
- HDMI Video output (With Enhanced Audio Return Channel, eARC)
- 1
- HDMI HDCP version
- 2.3
Extra Bass. Thrilling 3D sound
Enjoy immersive, theater-quality audio from your couch. The JBL Cinema SB190 gives you booming bass from a wireless subwoofer and soaring virtual Dolby Atmos effects that surround you. One-cable connection makes the powerful, low-profile soundbar a breeze to set up. And of course, you can stream your favorite music right from your phone or tablet. Pass the popcorn and dim the lights—it’s movie night.
FAQs & How-Tos
-
On the soundbar, press and hold the power and source button for more than
10 seconds.
Please note this procedure will revert ALL settings back to factory default.Was this helpful? Thank you for your feedback! -
If you have a mesh network (more commonly seen in Eero Mesh networks), it is possible that you may experience your satellite speakers or subwoofer intermittently disconnecting from the soundbar. This is similar to normal interference that occurs with products on a similar wireless frequency. The special thing about Eero mesh networks is that they do not allow you to move a device to the 5Ghz or 2.4Ghz band. The system will automatically decide which devices should be on which band and will move them accordingly (switching whenever needed). Some of our soundbars run on a 5Ghz frequency which is where the interference can occur. Since we cannot change the signal in which they operate and we cannot change the band they are connected to via their Eero mesh network, there are a few things you can do to try and stop this from occurring.
- Move the mesh nodes far away from the soundbar
- Use the 2.4Ghz band instead of the 5Ghz band (if your mesh system allows this)
- Ensure to enable/utilize the MU-MIMO setting (not applicable to all mesh systems). Please refer to your router's website to see if MU-MIMO is being utilized by default.
What is MU-MIMO?
MU-MIMO stands for Multi-User, Multi-Input, Multi-Output. This allows for the router to send a signal to multiple devices at one time vs. the previous version in which the router would be able to connect to multiple devices, but only send the signal to one device at a time.
NOTE: You may notice that when the soundbar is turned on, there may be a dip in the immediate internet speed, but it will go back to normal within less than a minute.
Was this helpful? Thank you for your feedback!
Images & Videos
Can’t find what you’re looking for?
Call Us
Talk to a product expert
Call Us now at:
(877) 871-6755
Mon - Fri: 9:00 am - 11:00 pm (ET)
Sat - Sun: 9:00 am - 5:00 pm (ET)
Chat with Us
Mon - Fri: 9:00 am - 11:00 pm (ET)
Sat - Sun: 9:00 am - 5:00 pm (ET)