Harman Kardon Citation Sub
Thundering bass for movies and music
Getting started with your Harman Kardon Citation Sub
Documents & Downloads
Product Specifications
- Power supply
- 100-240V~50/60Hz
- Power consumption in sleep mode
- < 2.0Watts
- 5GWISA transmitter power
- < 14dBm
- 5GWISA modulation
- OFDM, BPSK, QPSK, 16QAM
- 5GWISA transmitter frequency range
- 5.15-5.35GHz, 5.470-5.725GHz, 5.725-5.825GHz
- Note
- This product is designed to be instantly on and ready to receive signal from WiSA Tx Unit at a moment's notice, wireless connection must remain active at all times to ensure proper operation. The product is in compliance with the European Union energy legislation. The product will enter into sleep mode (networked standby) after 15 minutes without operation, after which it can be re-activated via wireless.
- Transducer
- 1 x 10" subwoofer
- Output power
- 200W RMS
- Signal-to-noise ratio
- >80dB
- Dimension (W x H x D)
- 447 x 334 x 367 mm (17.6” x 13” x 14.4”)
- Packaging Dimension (W x H x D)
- 530 x 386 x 427 mm (20.9” x 15.2” x 16.8”)
- Weight
- 14.35 kg (32 lb)
- Packaging Weight (Gross)
- 16.75 kg (36.93 lb)
Beautiful Sound That Speaks To You
The Harman Kardon Citation Sub is a next generation wireless subwoofer. Easy to set up and use, Citation Sub blends innovation in home audio with attention to detail in design, allowing for sophisticated looks and thundering bass for movies and music when paired with Citation Bar or Citation Tower. Get the full 5.1 home theater surround sound experience without the cables. With automatic software updates, your Citation Sub will always be up to date and at its best.
FAQs & How-Tos
-
If you have a mesh network (more commonly seen in Eero Mesh networks), it is possible that you may experience your satellite speakers or subwoofer intermittently disconnecting from the soundbar. This is similar to normal interference that occurs with products on a similar wireless frequency. The special thing about Eero mesh networks is that they do not allow you to move a device to the 5Ghz or 2.4Ghz band. The system will automatically decide which devices should be on which band and will move them accordingly (switching whenever needed). Some of our soundbars run on a 5Ghz frequency which is where the interference can occur. Since we cannot change the signal in which they operate and we cannot change the band they are connected to via their Eero mesh network, there are a few things you can do to try and stop this from occurring.
- Move the mesh nodes far away from the soundbar
- Use the 2.4Ghz band instead of the 5Ghz band (if your mesh system allows this)
- Ensure to enable/utilize the MU-MIMO setting (not applicable to all mesh systems). Please refer to your router's website to see if MU-MIMO is being utilized by default.
What is MU-MIMO?
MU-MIMO stands for Multi-User, Multi-Input, Multi-Output. This allows for the router to send a signal to multiple devices at one time vs. the previous version in which the router would be able to connect to multiple devices, but only send the signal to one device at a time.
NOTE: You may notice that when the soundbar is turned on, there may be a dip in the immediate internet speed, but it will go back to normal within less than a minute.
Was this helpful? Thank you for your feedback!
Images & Videos
Can’t find what you’re looking for?
Call Us
Talk to a product expert
Call Us now at:
(877) 871-6755
Mon - Fri: 9:00 am - 11:00 pm (ET)
Sat - Sun: 9:00 am - 5:00 pm (ET)
Chat with Us
Mon - Fri: 9:00 am - 11:00 pm (ET)
Sat - Sun: 9:00 am - 5:00 pm (ET)