JBL Vibe 300TWS
True wireless earbuds
Sold from 2022 until now
Getting started with your JBL Vibe 300TWS
Quick Start Guide
Get up and running in no time with our easy-to-follow Quick Start Guide
Register your product
Do you own this product? Register it here! And claim your warranty or service easily
Register nowDocuments & Downloads
Product Specifications
- Driver size (mm)
- 12
- Driver sensitivity at 1kHz/1mW (dB)
- 105
- Dynamic frequency response range (Hz)
- 20 Hz – 20 kHz
- Impedance (ohms)
- 32
- Number of drivers per ear
- 1
- Weight (g)
- 7.7
- Weight (oz)
- .27
- Bluetooth version
- 5.2
- Bluetooth profiles
- A2DP V1.3 AVRCP V1.6 HFP V1.7
- Bluetooth frequency
- 2.4 GHz - 2.4835 GHz
- Bluetooth transmitted modulation
- GFSK, π/4–DQPSK, 8–DPSK
- Bluetooth transmitter power
- <12 dBm
- Charging case battery life (max hours)
- 20
- Charging time (hours from empty)
- 2
- Maximum play time (hours)
- 6
- IP Code
- IPX2
- Charging cable
- Yes
- Voice Assistant integration
- Yes
- Built-in Microphone
- Yes
- Hands Free Call
- Yes
- Sweat Proof
- Yes
- Touch Control
- Yes
- True Wireless
- Yes
- Wireless
- Yes
- Charging case
- Yes
- Speed charge
- Yes
- Rechargable battery
- Yes
- Bluetooth
- Yes
True wireless earbuds
Keep on top of your world. JBL Vibe 300TWS earbuds bring you your music while staying in touch with your surroundings with no wires holding you back. Enjoy 26 hours of powerful sound enriched by JBL Deep Bass. Stay in touch on the-go with stereo calls and no annoying background noise. Manage audio and handle calls hands-free from either earbud or both, thanks to convenient touch controls. Ergonomically designed, their "stick design" fit snugly and discreetly in your ears to keep you comfortable and connected all day long, so you'll never miss a beat—or a conversation.
A hefty 12mm driver delivers JBL Deep Bass sound so you don't just hear the music, you feel it.
The ergonomic fit stays snug and secure to keep you comfortable and connected all day while the open-ear design enhances your ambient awareness of your surroundings.
Never miss a beat with 26 hours of combined playtime (and 6 hours in the earbuds). Or, when you need a quick power-up, you can Speed Charge another hour of battery life in just 15 minutes and for 2 hours for a full charge.
The single-mic Vibe 300TWS earbuds eliminate background noise so you can enjoy stereo quality calls on- the-go. Easily manage sound and calls hands-free, directly from the earbuds!
Easily shift between mono and stereo at any time in your left, right, or both earbuds while making calls, enjoying music, or talking with your voice assistant.
The convenient, rain-resistant IPX2-certified design of the JBL Vibe 300 TWS earbuds means you enjoy your music anytime—rain or shine.
Convenience at your fingertips. Activate all of your JBL Vibe 300TWS's audio functions with the ease of touch control and access your device's voice assistant directly from your earbuds.
FAQs & How-Tos
3 results
-
As with all in-ear headphones, our range of TWS headphones can be susceptible to a build up of dust and earwax. This can cause low volume on one or both earbuds, or balance issues (e.g. right earbud is louder than the left earbud). To reduce the likelihood of these issues occurring, it is a good idea to periodically clean your earbuds and your ears. Clean the earbuds by removing dust and wax after each use, using a pointed toothpick to remove larger amounts and a small amount of rubbing alcohol applied to a cotton swab for final degreasing.
If you are experiencing volume or balance issues, always check for wax and dirt in and around the earbud and driver and complete cleaning of the earbuds as described above. If the issue persists, there may be earwax/dirt stuck in the small holes in the grille in front of the driver, preventing sound output. To resolve the issue try dipping the affected earbud tip into a solution of lukewarm tap water and a small amount of dish soap (washing up liquid). The earbud tip should only be put into the liquid up to a maximum depth of 1-2 mm only (see images below). Immersing the earbuds in water or putting the earbuds in water at a larger depth than this could void your warranty. Keep the earbud tip in the water for about 2-3 minutes, then wipe/clean the grille with a small brush (such as a toothbrush). The should remove the wax and resolve the volume/balance issues.
Was this helpful? Thank you for your feedback! -
Double-tap the button on the right earbud, then on the third tap - press and hold the button for more than 5 seconds (until the unit shuts off).
This restores the earbuds to the factory defaults.
TWS must be connected to perform the reset, so neither of the earbuds should be off or in the charging case.
It also may be necessary to remove or forget the earbuds from the list of paired Bluetooth devices in order to pair again.Was this helpful? Thank you for your feedback! -
If you are having trouble pairing your headphones or if your device is asking for a PIN, please make sure to check all available BT connections in your device's settings. Verify that you are connecting to the headphone's product name that excludes 'LE'. The 'LE' connection is only intended for voice assistant feature compatible with your headphones. If the voice assistant feature has not yet been configured, this would explain why the 'LE' connection appears as an available connection, but cannot be used for Bluetooth audio.
https://harman.widen.net/s/dtsldx6jxx/bluetooth-pairing-issue-with-voice-assistant-headphone-le-image1Was this helpful? Thank you for your feedback!
Images & Videos
Can’t find what you’re looking for?
Call Us
Talk to a product expert
Call Us now at:
(877) 871-6755
Mon - Fri: 9:00 am - 11:00 pm (ET)
Sat - Sun: 9:00 am - 5:00 pm (ET)
Chat with Us
Mon - Fri: 9:00 am - 11:00 pm (ET)
Sat - Sun: 9:00 am - 5:00 pm (ET)
Text Us
Text with a support agent via SMS at:
628-333-7807
Mon - Fri: 9:00 am - 11:00 pm (ET)
Sat - Sun: 9:00 am - 5:00 pm (ET)