Support Overview / Headphones / In Ear Headphones / Sport / JBL Endurance PEAK
JBL Endurance PEAK

JBL Endurance PEAK

Waterproof True Wireless In-Ear Sport Headphones

Sold from 2018 until now

Getting started with your JBL Endurance PEAK

Getting started with your JBL Endurance PEAK

Quick Start Guide

Get up and running in no time with our easy-to-follow Quick Start Guide
Product Registration

Register your product

Do you own this product? Register it here! And claim your warranty or service easily

Register now

Documents & Downloads

Product Specifications

Driver size (mm)
10
Driver sensitivity at 1kHz/1mW (dB)
95
Dynamic frequency response range (Hz)
16 Hz – 22 kHz
Number of drivers per ear
1
Charging Case Weight (g)
92.1
Charging Case Weight (oz)
3.2
Earpiece Weight (g)
14.4
Earpiece Weight (oz)
0.5
Bluetooth profiles
A2DP 1.3, AVRCP 1.5, HFP 1.6
Bluetooth frequency
2.402 – 2.480GHz
Bluetooth transmitted modulation
GFSK, π/4DQPSK, 8DPSK
Bluetooth transmitter power
0 - 10dbm
Bluetooth version
4.2
Charging case battery life (max hours)
24
Charging time (hours from empty)
2
Maximum play time (hours)
4
Bluetooth
Yes
Charging cable
Yes
Touch Control
Yes
Built-in Microphone
Yes
Charging case
Yes
Hands Free Call
Yes
Powerhook
Yes
Rechargable battery
Yes
Secure Fit
Yes
Sweat Proof
Yes
True Wireless
Yes
Twistlock
Yes
Waterproof
Yes
Wireless
Yes
IP Code
IPX7

Unleash your Potential.

Free yourself from all constraints and be ready to reach a new level of performance with the JBL Endurance PEAK headphones. Enjoy the freedom of a fully wireless workout without the need to recharge the headphones for up to 28 hours (4h + 24h backup power). But if you feel like you still have more to give, it only takes 10 minutes of recharging for up to another hour of motivating music. Thanks to the PowerHook™ technology, the JBL Endurance PEAK headphones conveniently power on and off as you start wearing them, so they’re ready to attack each and every workout whenever you are. In addition, the PowerHook™ lets you switch off your TWS buds without reaching for your charging case each time. With their IPX7 waterproof design, the JBL Endurance PEAK are also guaranteed never to hurt or fall out and feature a flexible around the ears hook for extra security. In addition, the JBL Endurance PEAK headphones work in both mono and stereo mode and allow you to seamlessly control your sound or calls directly on the earpiece using their convenient touch controls. And when your workout is over, simply put your headphones in the rugged storage case.

The freedom of true wireless allows the music to take over and pushes you to higher peaks.
Enjoy more than a day of wireless audio, with up to 4 hours of continuous playback and up to 24 hours of backup power from the charging case.
The flexible and secure ear hook design automatically turns the power on/off when putting on or taking off the earphones. These headphones can switch on and off without the need to replace them back in their case every time.
Thanks to TwistLock™ and FlexSoft™ technologies, these headphones are lightweight and ergonomically built to ensure comfort and stability no matter the workout. With eartips in 3 sizes, for a comfortable and snug fit.
Featuring IPX7 and sweat proof material, the JBL Endurance PEAK headphones are designed to be used in all weather conditions. Durable and made to last, no matter the elements.
Touch enabled controls allow you to easily manage your music and calls controlling play, pause, volume, mono and stereo modes and tracks order with a simple touch for extra convenience, so that you can keep going.
The simple and intuitive touch sensitive controls on the right bud, allows you to choose between mono mode for calls and stereo mode for music playback.
Bluetooth® technology enables hands-free calling, so you don’t have to stop working out when receiving a call. The JBL Endurance PEAK works in mono mode for calls.
The rugged charging case protects the headphones and charges them when not in use. Provides up to 24 hours of total backup charge, with a 10-minute quick charge for 1 hour of music playback (max).

FAQs & How-Tos

15 results
  • Cleaning Instructions for Re-establishing Charging
    It is not uncommon to have charging problems with True Wireless headphones. You may encounter that charging stops, does not start at all or that one of the ear buds suddenly switches on and begins the pairing process. This is almost always caused by dirt on the metal charging contacts. These contacts are vulnerable because they can easily be contaminated by sweat, skin grease, or ear wax. They are usually gold plated, but gold plating does not prevent surface dirt.

    If you have charging problems, the first step is to always clean all contact points, on each earbud and on the charging case.
    You will need: cotton cloth or makeup swab, cotton swabs and rubbing alcohol. Also a pencil with eraser for further cleaning.
    needed-tools.png
    Use a cotton swab with some rubbing alcohol to clean the charging terminals of the headphones. Rotate the swab and scrub lightly on each contact surface, then use a cotton cloth to remove any dust and cotton residue left on the headphones. It is important to perform this process periodically to keep your headphones clean, thus avoiding affecting the charging speed/quality.
    cleaning-earbud-contact-points.png
    Wipe the contact pins in the charging case with a clean cotton swab. The swab can be slightly moistened with rubbing alcohol, but it is important that the interior is completely dry before closing the box. Use the cotton cloth and wait for it to dry.
    cleaning-charging-case.png
    Repeat until the contact points are visibly clean, and charging should work as designed.

    Try cleaning the contacts with the tip of a pencil and the eraser at the end of the pencil, the graphite and rubber can help to re-establish charging also.
    This procedure can be performed on all TWS earphones and cases.
  • aptX Audio Codec Support
    This headphone does not support aptX, aptX HD, aptX Low Latency audio codecs.
  • Endurance Series Headphones: Apt X
    The Endurance headphones do not support Apt X or AAC audio codecs.
  • Endurance Series Headphones: Charging
    Fully charge the earbuds along with the charging case before the first use. The charging case is for charging the earbuds only. LED behaviors: 1 LED- 25% 2 LED-25%-50% 3 LED-50%-75% 4 LED-75%-99% NO LED-100% Fully Charged You can keep the earbuds in standby mode for up to 3 hours without having to return them to the case. beyond this point the earbuds must be returned to the case for charging. You should receive up to 4 hours of playback with additional 24 hours of backup power from the charging case.
  • Endurance Series Headphones: Pairing Information
    If connecting for the first time, the headphone will enter pairing mode automatically after it is powered on. To turn the headphones on, simply spread apart the RIGHT power hook from the cord. You will see solid red LED and then it will flash blue as it begins to search for a device to connect to. The Endurance headphone should pop up on your discoverable devices within a few seconds and you should be connected! If you wish to turn off the headphones, remove them from your ear and allow the RIGHT power hook and cord to close together. This is magnetized, so they should close together with ease.
  • Endurance Series Headphones: Phone Information
    To answer call, press the "L" on the JBL logo on the RIGHT ear for 1 second. To hang up, press the "L" for 1 second. To ignore the call, press and hold the "L" for 2-3 seconds.
  • Endurance Series Headphones: Switching Devices
    To pair to a different device, double tap and hold your finger on the JBL logo for 5 seconds until you see the LED light flash blue. Make sure that the device you are trying to connect to is in range and in pairing mode. You should see the Endurance headphone pop up on your discoverable devices within a few seconds and the flashing LED light should now be a solid blue.
  • Endurance Series Headphones: Track Control
    To pause/play press the "L" on the JBL logo located on the RIGHT ear for 1 second. If you want to skip the track forward, press the "L" on the JBL logo on the RIGHT ear hook for 2 seconds. To skip tracks backward, press the "L" on the JBL logo on the RIGHT ear hook for 3-4 seconds.
  • Endurance Series Headphones: Volume Control
    To control the volume, simply move your finger up the ridges above the JBL logo on the RIGHT ear to increase the volume. To decrease the volume, move your finger down along the ridges.
  • Headphones & Third Party Communication Apps (Skype, Zoom, WhatsApp, etc)

    If you are experiencing issues getting the app to communicate with your headphones, (assuming you have already paired the headphones with the device) go into the communication apps audio settings. You will likely find the resolution there. You may have to set your headphones as the ‘communication device’ within the app you are using.

< 1 2 >

Images & Videos

  • JBL Endurance PEAK - Black - Waterproof True Wireless In-Ear Sport Headphones - Hero
  • JBL Endurance PEAK - Black - Waterproof True Wireless In-Ear Sport Headphones - Front
  • JBL Endurance PEAK - Black - Waterproof True Wireless In-Ear Sport Headphones - Back
  • JBL Endurance PEAK - Black - Waterproof True Wireless In-Ear Sport Headphones - Detailshot 1
  • JBL Endurance PEAK - Black - Waterproof True Wireless In-Ear Sport Headphones - Detailshot 2
  • JBL Endurance PEAK - Black - Waterproof True Wireless In-Ear Sport Headphones - Detailshot 3
  • JBL Endurance PEAK - Black - Waterproof True Wireless In-Ear Sport Headphones - Detailshot 4
  • JBL Endurance PEAK - Black - Waterproof True Wireless In-Ear Sport Headphones - Detailshot 5

Can’t find what you’re looking for?

Call Us

Call Us

Talk to a product expert
Call Us now at: (877) 871-6755

Mon - Fri: 9:00 am - 11:00 pm (ET)
Sat - Sun: 9:00 am - 5:00 pm (ET)

Chat with Us

Chat with Us

Mon - Fri: 9:00 am - 11:00 pm (ET)
Sat - Sun: 9:00 am - 5:00 pm (ET)

message

Text Us

Text with a support agent via SMS at:
628-333-7807

Mon - Fri: 9:00 am - 11:00 pm (ET)
Sat - Sun: 9:00 am - 5:00 pm (ET)