Under Armour Sport Wireless Heart Rate
Heart rate monitoring, wireless in-ear headphones for athletes
Sold from 2016 until now
Getting started with your Under Armour Sport Wireless Heart Rate
Quick Start Guide
Get up and running in no time with our easy-to-follow Quick Start Guide
Register your product
Do you own this product? Register it here! And claim your warranty or service easily
Register nowDocuments & Downloads
Product Specifications
- Bluetooth
- Speaker drivers
- JBL 5.8mm dynamic
- Maximum volume
- 111dB SPL
- Frequency response
- 10Hz - 22kHz
- Bluetooth version and profiles
- 4.2, A2DP v1.3, AVRCP v1.6, HFP v1.6, HSP v1.2
- Bluetooth transmitted frequency and power
- 2.402GHz - 2.48GHz, <4dBm
- Bluetooth transmitted modulation
- GFSK, π/4, DQPSK, 8-DPSK
- Battery type
- rechargeable lithium-ion (3.7V 2x50mAH)
- Battery life
- up to 5 hours with audio and heart rate enabled
- Battery charge time
- Less than 2 hours
- Controls
- three-button controller, right earbud touch sensor
- Connector
- micro USB
- Included
- zippered pouch, charge cable, size 5, 6, 7, and 8 eartips, MapMyRun premium voucher
Find Your Zone
Train harder and smarter with Under Armour® Sport Wireless Heart Rate – Engineered by JBL®. These wireless, sweat proof headphones deliver energizing music and heart rate tracking into your endurance sports training, all in your ears. With UA Record™, your dashboard for connected fitness, you can view in-workout training analysis and analyze your performance as your training progresses. And you can even hear on-demand heart rate updates thanks to a touch sensor on the right earbud. Ideal for running, cycling, rowing, all kinds of cardio, and more, UA Sport Wireless Heart Rate feature legendary JBL Signature Sound with Pure Bass performance to give you the inspiration and motivation to finish strong.
FAQs & How-Tos
-
This headphone does not support aptX, aptX HD, aptX Low Latency audio codecs.Was this helpful? Thank you for your feedback!
-
No, you will need to use your fingertips, or use special gloves made for touch-screen use.Was this helpful? Thank you for your feedback!
-
Currently in Record, you can not customize ranges for each heart rate zone but you can customize your Max heart rate, which affects your zone ranges. Edit your Max heart rate by going to My Profile page by tapping the person icon in the top left corner. Tap the edit button in the top left corner to edit the Max HR field.Was this helpful? Thank you for your feedback!
-
No. These headphones are not waterproof. Swimming with these headphones will cause significant and irreversible damage.Was this helpful? Thank you for your feedback!
-
You can turn the Heart Rate sensor off and still use the headphones for audio by placing your finger on the right earpiece for 3-4 seconds. You will hear an audio prompt stating, “Heart Rate disconnected” which will turn the Heart Rate sensor off. If you wish to turn the sensor back on, simply place your finger on the RIGHT earpiece again for 3-4 seconds until you hear the voice prompt stating that the Heart Rate sensor has been turned back on.Was this helpful? Thank you for your feedback!
-
Although the product is Water Resistant and Sweat Resistant, continuous exposure to water over an extended period of time may damage your earphones.Was this helpful? Thank you for your feedback!
-
If you are experiencing issues getting the app to communicate with your headphones, (assuming you have already paired the headphones with the device) go into the communication apps audio settings. You will likely find the resolution there. You may have to set your headphones as the ‘communication device’ within the app you are using.
Was this helpful? Thank you for your feedback! -
You can reach out to the Under Armour Customer Service in the USA by phone at 1.800.377.9952 or by e-mail at ua.jblsupport@harman.com.Was this helpful? Thank you for your feedback!
-
If you want to pair and connect to a different device, make sure the headphones are turned off. Proceed to turn the headphones on by pressing and holding the power button for 3- 5 seconds until you hear the audible voice stating “power on” followed by “looking for device.” You will see the LED alternate between blue and red as it searches for your new device. Make sure your device is in search mode. Within seconds your headphone should appear as one of your discoverable devices. You will then hear the audible voice stating, “audio connected” followed by a blinking blue LED light located on the inline microphone indicating that it is now connected to a device.Was this helpful? Thank you for your feedback!
-
To increase the volume, quickly press the top button located on the inline microphone with several quick clicks. If you want to decrease the volume, quickly press the bottom button with several quick clicks until desired volume is achieved.Was this helpful? Thank you for your feedback!
Images & Videos
Can’t find what you’re looking for?
Call Us
Talk to a product expert
Call Us now at:
(877) 871-6755
Mon - Fri: 9:00 am - 11:00 pm (ET)
Sat - Sun: 9:00 am - 5:00 pm (ET)
Chat with Us
Mon - Fri: 9:00 am - 11:00 pm (ET)
Sat - Sun: 9:00 am - 5:00 pm (ET)
Text Us
Text with a support agent via SMS at:
628-333-7807
Mon - Fri: 9:00 am - 11:00 pm (ET)
Sat - Sun: 9:00 am - 5:00 pm (ET)