Documents & Downloads
Product Specifications
- MSRP U.S.
- $334.95 each
- Dimensions (H x W x D)
- 4 x 17-3/8 x 14-1/2
- Quieting Sensitivity
- MONO – 3.7uV
- Quieting Sensitivity
- STEREO -37uV
- Signal-to-Noise Ratio
- FM STEREO --74dB
- Capture Ratio
- FM... 1.75dB
- Alternate Channel Selectivity
- FM… 60dB
- IF Rejection
- 85dB
- AM Rejection
- FM... 50dB
- Stereo Separation
- 45dB @ 1kHz
- Total Harmonic Distortion
- MONO – 0.1% @ 1kHz, 100% modulation
- Total Harmonic Distortion
- STEREO – 0.12% @ 1kHz, 100% modulation
- Sensitivity
- AM... AM – 300uV/m
- Alternate Channel Selectivity
- AM... 40dB
- Image Rejection
- AM... 45dB
- IF Rejection
- AM... 25dB
- Usable Sensitivity
- FM MONO – 1.9uV
- Amplifier Power (RMS)
- 30 watts per channel @ <0.08% THD primarily low order harmonics @8 ohms from 20Hz – 20kHz
- Power Bandwidth
- HALF POWER – <10Hz – 60kHz with 8 ohms
- Frequency Response
- <1Hz – 150kHz (+0/–3dB @ rated output)
- Total Harmonic Distortion
- 0.02% primarily low order harmonics 1kHz @ rated output
- Transient Intermodulation Distortion (TIM)
- 0.15% @ rated output
- High Instantaneous Current Capability (HCC)
- ± 18 Amps
- Slew Rate
- 100 volts/uSec
- Rise Time
- SQUARE WAVE – better than 2.0uSec @ 20kHz
- Square Wave Tilt
- 6% @ 20Hz
- Negative Feedback
- 20dB
- Damping Factor
- 60 @ 8 ohms, 20Hz – 20kHz
- Hum and Noise
- PHONO --80dB A-WTD
- Hum and Noise
- AUX – -85dB A-WTD
- Input Sensitivity
- PHONO -2.2mV
- Input Sensitivity
- AUX – 135mV
- Phono Input Sensitivity
- RESISTANCE – 47k ohms
- Phono Input Sensitivity
- CAPACITANCE – 125pF
- Phono Overload
- >130mV
- RIAA Equalization
- ±1dB
Stereo Receiver (30 watts x 2)
Images & Videos
Can’t find what you’re looking for?
Call Us
Talk to a product expert
Call Us now at:
(877) 871-6755
Mon - Fri: 9:00 am - 11:00 pm (ET)
Sat - Sun: 9:00 am - 5:00 pm (ET)
Chat with Us
Mon - Fri: 9:00 am - 11:00 pm (ET)
Sat - Sun: 9:00 am - 5:00 pm (ET)
