AVR 7550HD

AVR 7550HD

Audio/Video Receiver With Dolby TrueHD & DTS-HD Master Audio & HDMI 1.3 (110 watts x 7)

Sold from 2009 until 2011

Successor Product: AVR 3650
Made in: China

Documents & Downloads

Product Specifications

Power Requirements
120V AC/60Hz
Power Consumption
120W Idle, 1,405W Max. (7 channels driven)
Digital Inputs (coaxial/optical)
4/4 on rear; 1 (switchable to output)/1 on front
Analog Inputs
3 component inputs
Analog Inputs
3 composite inputs
Analog Inputs
3 S-video inputs
Analog Inputs
5 audio inputs
Analog Inputs
6/8 channel audio input
On-Screen Display
Yes, with component video and HDMI outputs
Multizone Capability
Audio and video; A-BUSREADY; RS-232 serial control port; surround back channels assignable to remote zone; Zone II remote
Auto Setup
EzSet/EQ II room equalization
Remote Control
Programmable, learning seven-device main remote control
Shipping Weight (System, Accessories, Packing)
51 lb (23.3kg)
MSRP U.S.
$2999.95 each
# of Amplifier Channels
7
Continuous Average Power (FTC) per Channel (stereo mode)
110 Watts (2 channels driven) @ <0.07% THD, 20Hz – 20kHz, both channels driven into 8 ohms
Front L & R Channels
110 Watts (2 channels driven) @ <0.07% THD, 20Hz – 20kHz into 8 ohms
Center Channel
110 Watts @ <0.07% THD, 20Hz – 20kHz into 8 ohms
Surround Channels (L & R Side, L & R Back)
110 Watts (2 channels driven) @ <0.07% THD, 20Hz – 20kHz into 8 ohms
Input Level/Impedance
200mV/47k ohms - Linear (High-Level)
Signal-to-Noise Ratio
100dB (IHF-A)
Frequency Response
10Hz – 130kHz (+0/-3dB @ 1 watt)
Surround System Adjacent Channel Separation:
Dolby Pro Logic I/II/IIx
40dB
Dolby Digital
55dB
DTS
55dB
Transient Intermodulation Distortion (TIM)
Unmeasurable
Slew Rate
40V/µSec
Width
17-5/16 inch (440mm)
Height
6-1/2 inch (165mm)
Depth
17-1/16 inch (435mm)
Weight
44 lb (20kg)
Dimensions:
Carton Dimensions (H x W x D)
11 inch x 20-1/2 inch x 22-13/16 inch (280mm x 520mm x 580mm)
Television Format
NTSC
Input Level/Impedance
1Vp-p/75 ohms
Output Level/Impedance
1V/75 ohms
Composite and S-Video
10Hz – 8MHz (–3dB)
Component Video
10Hz – 100MHz (–3dB)
HDMI
Version 1.3a with 10-bit Deep Color
Frequency Range
AM... 520 – 1710kHz
Frequency Range
FM... 87.5 – 108.0MHz
Signal-to-Noise Ratio
AM... 45dB
Usable Sensitivity
FM... IHF 1.3µV/13.2dBf
Signal-to-Noise Ratio
FM... Mono/Stereo 70dB/68dB
Usable Sensitivity
AM... Loop 500µV
Distortion
AM... 1kHz, 50% Mod. 0.8%
Distortion
FM... Mono/Stereo 0.2%/0.3%
Selectivity
AM... ± 10kHz, 30dB
Stereo Separation
FM... 40dB @ 1kHz
Selectivity
FM... ± 400kHz, 70dB
Image Rejection
FM... 80dB
IF Rejection
FM... 90dB
Amplifier Power (RMS)
110W (2 channels driven) @ 8 ohms (20Hz – 20kHz, <0.07% THD)

Harman Kardon® A/V receivers are renowned for their power, performance and ease of use, and the AVR 7550HD will only enhance that reputation. Among the fi rst receivers to offer Dolby Volume technology, which automatically adjusts volume levels when switching between sources and channels, the AVR 7550HD delivers 110 watts of power to each of the seven channels, plus two subwoofer outputs. It accepts a universe of inputs, including HDMI, component, S-video, USB and broadband Internet, as well as The Bridge II docking station (included) for iPod A/V playback, control and charging. Every Dolby and DTS® technology is here, as is Faroudja DCDi Cinema and our exclusive Logic 7 processing. Zone II remote, Zone II OSD and A-BUS® technologies work together to greatly simplify multiroom A/V applications.

Can’t find what you’re looking for?

Call Us

Call Us

Talk to a product expert
Call Us now at: (877) 871-6755

Mon - Fri: 9:00 am - 11:00 pm (ET)
Sat - Sun: 9:00 am - 5:00 pm (ET)

Chat with Us

Chat with Us

Mon - Fri: 9:00 am - 11:00 pm (ET)
Sat - Sun: 9:00 am - 5:00 pm (ET)

message

Text Us

Text with a support agent via SMS at:
628-333-7807

Mon - Fri: 9:00 am - 8:00 pm (ET)