Documents & Downloads
Product Specifications
- Power Requirements
- 120V AC/60Hz
- Power Consumption
- 72W idle, 694W maximum (2 channels driven)
- Surround System Adjacent Channel Separation
- Pro Logic Decoding... 40dB
- Surround System Adjacent Channel Separation
- Dolby Digital... 55dB
- Surround System Adjacent Channel Separation
- DTS... 55dB
- MSRP U.S.
- $699.95 each
- Surround Modes
- Dolby Digital, DTS surround, Harman's VMAx
- Digital Inputs (coaxial/optical)
- 6
- Digital Output
- 2
- Dimensions (H x W x D)
- Width 17-5/16 inch (440mm)
- Dimensions (H x W x D)
- Height 6-1/2 inch (165mm) Height measurement includes feet and chassis.
- Dimensions (H x W x D)
- Depth 17-1/8 inch (435mm) Depth measurement includes knobs, buttons and terminal connections.
- Weight
- 31lbs ( 14.1kg)
- Television Format
- NTSC
- Input Level/Impedance
- 1Vp-p/75ohms
- Output Level/Impedance
- 1V/75 ohms
- Video Frequency Response
- 10Hz – 8MHz (-3dB)
- Frequency Range
- AM... 520 – 1710kHz
- Frequency Range
- FM... 87.5 – 108MHz
- Signal-to-Noise Ratio
- AM... 45dB
- Usable Sensitivity
- FM... IHF 1.3µV/13.2dBf
- Signal-to-Noise Ratio
- FM... 70dB
- Usable Sensitivity
- AM... Loop 500µV/M
- Distortion
- AM... 1kHz, 50% Mod 0.8%
- Signal-to-Noise Ratio
- FM... 68dB Stereo ( measured at amV RF Input Level)
- Distortion (Mono/Stereo)
- FM... 0.3%/0.3%
- Selectivity
- AM... ± 10kHz, 30dB
- Stereo Separation
- FM... 40dB @1kHz
- Selectivity
- FM... ± 400kHz, 65dB
- Image Rejection
- FM... 80dB
- IF Rejection
- FM... 90dB
- Tuner Output Level
- FM... 1kHz, ±75kHz Dev 500mV
- Continuous Average Power (FTC) per Channel (stereo mode)
- 60 watts per channel @<0.07% THD, 20Hz – 20kHz, both channels driven into 8 ohms
- Continuous Average Power (FTC) per Channel (surround modes)
- 50 watts per channel @<0.07% THD, 20Hz – 20kHz, all channels driven into 8 ohms
- High Instantaneous Current Capability (HCC)
- ± 35 Amps
- Input Level/Impedance
- 250mV/47k ohms - Linear (High-Level)
- Signal-to-Noise Ratio
- 95dB
- Frequency Response
- 10Hz – 100kHz (+0/-3dB @ 1 watt)
- Transient Intermodulation Distortion (TIM)
- Not Measurable
- Rise Time
- 16µsec
- Slew Rate
- 40V/µsec
High-Current (+/-35 Amps), Utrawide-Bandwidth (10Hz-100kHz)Amplifier Design Effortlessly Powers the Most Dynamic Digital Sources. Dolby Digital On Board Using Advanced Crystal DSP Engine. 24-Bit/96kHz D/A Converters for Superior Digital Decoding. 6-Channel Direct Inputs for Use with External Surround Decoders.
FAQs & How-Tos
1 results
-
The remote is only capable of operating one device at a time (unless you have programmed advanced functions such as Volume, Channel or Transport control Punch-Through). When you press the Source Selector to operate your other product, such as the DVD player, the remote cannot control any other product, including the AVR, until you press the AVR Button again. To avoid your problem in the future, always press the AVR Button or appropriate Source Selector before you enter any command.Was this helpful? Thank you for your feedback!
Images & Videos
Can’t find what you’re looking for?
Call Us
Talk to a product expert
Call Us now at:
(877) 871-6755
Mon - Fri: 9:00 am - 11:00 pm (ET)
Sat - Sun: 9:00 am - 5:00 pm (ET)
Chat with Us
Mon - Fri: 9:00 am - 11:00 pm (ET)
Sat - Sun: 9:00 am - 5:00 pm (ET)
Text Us
Text with a support agent via SMS at:
628-333-7807
Mon - Fri: 9:00 am - 11:00 pm (ET)
Sat - Sun: 9:00 am - 5:00 pm (ET)