How To

How To

1867 results
  • The typical values are around 2 & 75 ohms. The default setting is low, we are purposefully not recommending one setting over the other. Headphone impedances can vary (typically in the range of 2 to 300 ohms) and some users may prefer listening with high impedance headphones at the low impedance setting, while others may prefer listening on low impedance headphones at the high impedance setting. Either setting will work with any headphone, so it’s really just a matter of personal listening preference and the user can experiment with the settings. There is no quantifiable performance advantage between the settings - it really just comes down to personal preference. Users can select the setting they like best depending on the type and quality of their headphones, program material, and their own auditory characteristics.
  • Even when reducing volume to minimum on the Bluetooth source unit, it does not reduce the audio signal to zero. In this case the Micro Wireless will playback music at a very low volume.
  • The LED light will be on when the InfinityLAB charger is being powered and it is ready to charge your devices.
    The LED light will be off when the power source is off.
  • For 20W charger, the max. power output is 20W total.
    For 30W charger, the max. power output is 30W total.
    For 65W charger, the max. power output is 65W total.
    For 100W charger, the max. power output is 100W total.
    For 30W, 65W and 100W chargers, when charging more than one device simultaneously, total max. power output is 30W, 65W and 100W, respectively. You can also check detailed power output information from specification on product page.
  • For 5,000 models, the Max power output is 18W total.
    For 10,000 models, the Max power output is 30W total.

    It means when charging more than one device simultaneously, total max. output is 18W for 5,000 models and 30W for 10,000 models.
    You can also check detailed power output information from the specification on the product page.
  • True Adaptive NC available on Tour One enables real-time monitoring of exterior surroundings and personal attributes like movement, hair, eyeglasses, and automatic adjustments to the NC performance and EQ.

    If you don’t prefer the canceling performance's automatic change, you can get a fine-tuned canceling level by choosing “Everyday Mode” in the app.


    Adaptive Noise Cancelling - available on Tour Pro+ TWS - listens to ambient environmental noises using external and internal mics then creates the inverse phase back to the listener creating the noise “canceling” effect.
    The headphones also allow the listener to adapt or adjust noise cancellation through features like Ambient Aware and TalkThru.
  • Make sure to press the association button once. If by mistake you pressed it more than once, there is a good chance that association does not take place. Wait until the association process is completed, which takes about 2 minutes, and repeat the process.
  • This can be caused by the charge arm reaching its thermal temperature cutoff. This is a safety feature to prevent a potential risk. For proper heat dissipation, always be sure to have the charging arm in the open position when your smart phone is attached.
  • The three JBL Synchros on-ear and over-ear headphones S300, S500 and S700 all have cables with remote control on them. There are two types of remote controls. One is for iPhones mainly. It has white dividing rings between the poles of the jack plugs. The other one is for Android phones. It has black dividing rings between the poles of the jack plugs. This is shown in the owner's manuals as a drawing. The S300 comes in two models, S300i and S300a. They are of course meant for iPhones and Android, respectively. You should either buy the i or the a version, to match the phone you have. But since the difference is only in the remote control on the cable, it is always possible to buy the alternative cable later, as long as they are in stock as spare parts. The S500 and S700 have BOTH cables in the box, so there is no i and a version of these models.
  • These holes are the microphones for the JBL Link
  • If your LINK BAR has 4 orange LED lights in the front, this means you have "muted" the microphone which is located on the top of the speaker.
    To unmute the LINK BAR use the "switch" and the front LEDs will stop illuminating orange. Now you can use the hot-words to interact with the Google Assistant/Google Search (varies from country).

    Privacy information:
    We call our button the "PrivacySwitch" for the moments when you don't want the bar to listen for the hot words.
    Google has high privacy rules, and one of them is not to share end-user data with any third-party apps.

     
  • For InfinityLab charger, the recommended operating temperature is between 0-45°C.
    Our chargers provide auto protection against overheating as well as overcurrent/overvoltage conditions.
    Therefore, when the operating temperature is outside the range, this charger will auto adjust the output powers to protect itself and your devices.
< 1 ... 120 121 122 123 124 ... 156 >

Can’t find what you’re looking for?

Call Us

Call Us

Talk to a product expert
Call Us now at: (877) 871-6755

Mon - Fri: 9:00 am - 11:00 pm (ET)
Sat - Sun: 9:00 am - 5:00 pm (ET)

Chat with Us

Chat with Us

Mon - Fri: 9:00 am - 11:00 pm (ET)
Sat - Sun: 9:00 am - 5:00 pm (ET)

message

Text Us

Text with a support agent via SMS at:
628-333-7807

Mon - Fri: 9:00 am - 11:00 pm (ET)
Sat - Sun: 9:00 am - 5:00 pm (ET)