How To
How To
1867 results
-
No, the pads are glued to the headphone body, and must be replaced by a service technician.Was this helpful? Thank you for your feedback!
-
Yes, when unit is on, press and hold Source and Power buttons for about 6-7 seconds.Was this helpful? Thank you for your feedback!
-
If you want to change Bluetooth source, you may have to reset the Bluetooth system in the AURA. To do this, hold your finger on the input selector field (circle with arrow pointing in) on the side of your AURA for at least 3 seconds. Now the previous source is deleted, and you can pair a new source and play from it.Was this helpful? Thank you for your feedback!
-
Yes, on the master speaker (the one with playback buttons), simply press the Reverse and Forward Play buttons at the same time for 3 seconds. Please note that after you have performed the reset procedure, master and secondary speakers are no longer connected. Go to the owner's manual page 4, the section "speaker association", to pair the secondary and master again.Was this helpful? Thank you for your feedback!
-
Yes, simply press and hold Volume + & phone button at the same time. When the unit is reset, it will power off, and turn on the unit again, and it is reset.Was this helpful? Thank you for your feedback!
-
Yes it is possible to reset your speaker. The reset will remove all Bluetooth pairings and WiFi network settings. In power ON mode, press and hold the Power Button for at least 10 seconds, until the volume and input selector lights begin to flash. Your JBL Authentics L8 or L16, are now back to factory settings. Please reconnect the speaker to your WiFi network again.Was this helpful? Thank you for your feedback!
-
Yes, turn on your Onyx studio 2 and hold down phone button & volume + at the same time. Onyx Studio 2 will power off and when you power it on again, it has been reset.Was this helpful? Thank you for your feedback!
-
Yes, you can see all voice interactions with the Harman Kardon Allure by using the Alexa app and visiting History in Settings. Your interactions are grouped by question or request. Tap an entry to see more detail, provide feedback, or listen to audio sent to the Cloud for that entry by tapping the play icon. Sometimes Alexa may not understand you perfectly, and the translations you see in History may not always reflect exactly what you said (for example, they may be inaccurate or incomplete). You can help us improve your experience by providing feedback on inaccurate translations in History.Was this helpful? Thank you for your feedback!
-
Yes, and it is very simple. Choose the custom setup option if you want to manually connect the BDS system to Wi-Fi. To connect the BDS system to a specific Wi-Fi network, you need to enter the Wi-Fi network name and password in the network settings. Confirm the SSID name. Your BDS should now be connected to the WiFi.Was this helpful? Thank you for your feedback!
-
No, this is not possible.Was this helpful? Thank you for your feedback!
-
Yes it is possible. Connect any iOS device (iPhone, iPod touch or iPad) to the front panel USB port of the BDS. Make sure Wi-Fi is enabled on your iOS device and that it is currently connected to your wireless home network. NOTE: iOS version 5 or higher is required for iOS Wi-Fi sharing.
- Select Configure Wi-Fi by iOS from the Setup Wi-Fi list. A pop-up will be displayed on your iOS device.
- Select Allow to confirm that you want to share your Wi-Fi settings.
- The connection should now be established automatically. Check the status on your TV for confirmation"
Was this helpful? Thank you for your feedback! -
You can only share the sound via JBL Connect through Bluetooth connected devices. TV sound is not permitted as it would cause lip-sync issues.Was this helpful? Thank you for your feedback!
Can’t find what you’re looking for?
Call Us
Talk to a product expert
Call Us now at:
(877) 871-6755
Mon - Fri: 9:00 am - 11:00 pm (ET)
Sat - Sun: 9:00 am - 5:00 pm (ET)
Chat with Us
Mon - Fri: 9:00 am - 11:00 pm (ET)
Sat - Sun: 9:00 am - 5:00 pm (ET)
Text Us
Text with a support agent via SMS at:
628-333-7807
Mon - Fri: 9:00 am - 11:00 pm (ET)
Sat - Sun: 9:00 am - 5:00 pm (ET)