How To

How To

1867 results
  • In order to skip the tracks on the Y500 headphones, slide and hold Volume Up (to skip forward) or Volume Down (to skip backwards) for 3 seconds. These buttons are located on the LEFT ear cup.
  • On backup battery power, please wait 50 seconds for the alarm to turn off automatically.

  • You must first set a radio preset by tuning to a radio station and holding down the 1, 2, or 3 button to save it. After this, the preset will be an option when setting up a new alarm.

    When setting up the alarm, the options will be displayed in the following order:

    ​​​​​​1. Set Alarm Hour.
    2. Set Alarm Minute.
    3. Set Recurrence - Weekday/Once.
    4. Set Ringtone - 4 built-in alarm tones or radio preset 1/2/3 (see information above).
    5. Set Light - On/Off.

    If the light is set to 'On' when the alarm is set up, once it goes off it will gradually increase in brightness over 10 seconds.

  • You can easily adjust the volume to your choosing while setting your alarm on the Horizon 2. When setting your alarm, choose the Alarm Bell 1 or the Alarm Bell 2 on the top of the speaker. As you go through your settings when choosing an alarm time, it will give you the option to adjust the volume setting you wish to have on the alarm. Just simply adjust the volume by turning the volume knob on the top of the speaker. After you choose the volume, press the volume knob once to move to the next settings option. 
    Please note: the alarm volume will gradually increase until you choose to either snooze or turn the alarm off completely. 
  • Here are all the possibilities of how you can charge devices from your power bank.
    • InstantGo 5,000 with built-in Lightning cable: 1 (1 x integrated cable)
    • InstantGo 5,000 with built-in USB-C cable: 2  (1 x integrated cable, and 1 x USB-C output)
    • InstantGo 5,000 wireless: 3 (1 x Wireless, 1 x USB-C output and 1 x USB-A output)
    • InstantGo 10,000 with built-in Lightning cable: 2 (1 x integrated cable, and 1 x USB-A output)
    • InstantGo 10,000 with built-in USB-C cable: 3 (1 x integrated cable, 1 x USB-C output and 1 x USB-A output)
    • InstantGo 10,000 wireless: 3 (1 x Wireless, 1 x USB-C output and 1 x USB-A output)
  • Yes, you may charge your speaker from your desktop or laptop, but the charging time will be longer than using the supplied power adapter.
  • This headphone does not support aptX, aptX HD, aptX Low Latency audio codecs.
  • Yes. If neither the size 5 or size 7 enhancers provide a secure fit, our customer care team can send you a complimentary sizing pack with two additional sizes. Please email ua.jblsupport@harman.com to request yours today.
  • The JBL Bar series soundbars supports three CEC commands: - System Standby - One Touch Play - Audio Return Channel.
  • No, rack ears are not available for the No. 536 mono amplifiers.
  • No. Although the Control X Wireless have a rugged exterior and are portable, they are not all-weather speakers. Any direct exposure to harsh weather condition (rain, snow, extreme hot/cold temperatures) will damage the speakers.
  • Yes, the cords on the new N40 are detachable. You can remove the cords from the top of the stainless steel earbud housing. Please make sure that you attach the left cord to the left ear plug and the right cord to the right earbud. You will see a red dot indicator for Right and and blue dot indicator for Left on the cable. There are two detachable cables provided. One detachable straight cable and one detachable 3 button microphone cable.
< 1 2 3 4 5 6 ... 156 >

Can’t find what you’re looking for?

Call Us

Call Us

Talk to a product expert
Call Us now at: (877) 871-6755

Mon - Fri: 9:00 am - 11:00 pm (ET)
Sat - Sun: 9:00 am - 5:00 pm (ET)

Chat with Us

Chat with Us

Mon - Fri: 9:00 am - 11:00 pm (ET)
Sat - Sun: 9:00 am - 5:00 pm (ET)

message

Text Us

Text with a support agent via SMS at:
628-333-7807

Mon - Fri: 9:00 am - 11:00 pm (ET)
Sat - Sun: 9:00 am - 5:00 pm (ET)