How To

How To

1867 results
  • Press and hold the RIGHT center button for 1-2 seconds.
  • Tap and hold the left earpiece for 2 seconds
  • On the back of the inline microphone you will see the letter A (Android) and i (IOS devices) and a switch option to choose between the two.
  • The E65BTNC noise cancellation button is located on the bottom Right ear cup. To turn the Active Noise Cancellation on, press and hold the button (Located next to the Bluetooth button) for 2-3 seconds or until you hear the confirmation audio tone. To turn off the noise cancellation, press and hold for 2 seconds or until you hear the audio tone powering off. A white LED next to the button lights up when NC is on.
  • The DUET NC noise cancellation button is located on the bottom Right ear cup. To turn the Active Noise Cancellation on, press and hold the button (Located next to the Bluetooth button) for 2-3 seconds or until you hear the confirmation audio tone. To turn off the noise cancellation, press and hold for 2 seconds or until you hear the audio tone powering off. A white LED next to the button lights up when NC is on.
  • Because the Right Ear cup is a touch sensor, you simply have to move your finger from top to bottom on the outside ear cup to increase the volume. In order to decrease the volume, move your finger from the bottom of the ear cup to the top.
  • With the table stand, Sabre 35 is 125 mm high and 55 mm deep.
  • By pressing and holding the Bluetooth and the Volume PLUS buttons at the same time. The software version is shown in the display.
  • For the owner, two indications show the difference: 1. In the menu system, a Spotify option is available as one of the tiles. 2. A check of the software version will show 3.16.0 or higher. There is no mention of the Spotify option on the BDS unit itself. For customer service, a serial number check will show the precise model.
  • The Onyx Studio 9 plays songs based on the order of the date that the music is added to the USB stick.

  • When playing music: one click is Pause or Play. Two clicks skips to next track. Three clicks skips back to start of track or previous track. At all times, hold the button to start voice-activated phone functions. For telephone use: one click to accept a call, two clicks to end the call.
  • Unplug the power cord from soundbar. While holding down the VOLUME + button, plug the power cord into the soundbar. A green LED, followed by a blue LED will light up, after which the soundbar will go into standby. The SB150 is now reset.
  • For headphones with Version 4.0 of the Firmware, the first update will be done via USB cable, and after the first update, all subsequent updates will be delivered over the air. For headsets with version 5.0 of the firmware, all updates will be delivered over the air, via the app
  • When docked and connected to the harness, the BASSPRO GO can be used as a powered subwoofer or a full-range car audio speaker.  It receives it’s audio source from the head unit via the wiring harness and it’s power from the car battery.  Bluetooth is not active.

    When undocked/portable and removed from the harness, it can no longer be used as a powered sub.  It is strictly a full-range portable Bluetooth speaker system.  It receives it’s audio source from the Bluetooth input only, and receives it’s power from the internal battery.
     
  • You can listen up to 8 hours of MP3 music, with a fully charged battery, depending on volume and type of music
  • Approximately 2.5 hours. This depends on the actual charger used, and its capacity in Amperes.
  • The surround speaker takes up to 4 hours to fully charge.
  • Any conversation or search history is stored in the cloud via your Google account and is saved until you choose to delete it. JBL LINK speakers do not keep or store any data locally.
  • The memory is based on flash memory, and is not forgotten.
  • The cable is approximately 125 cm long.
  • If your OMNI 50+ is completely drained, it will take 3,5 to 4 hours to fully charge. We advise to charge the Omni 50+ when it starts to blink red.
  • You can have 3 smart devices connected at the same time and by pressing play on either one of the sources (smart devices) will start streaming music. The speaker can remember up to 8 paired smart devices and when this buffer is full it will release the first added device in connected sequences. Resetting the speaker will also clear this buffer.
  • AURA Studio has the Multi-Connect feature (Social-Mode) which allows you to connect up to 2 devices at the same time and play different music from either device. Note that the music playing on one device will be interrupted when the other device begins playing music, and vice-versa.
  • You can have two connectecd devices at the same time.
  • All three devices supports up to 3 Bluetooth connections at the same time. However, only one can play music while connected, if one of the other paired devices starts playback, it will interrupt the music that is currently playing, and begin playing from the second or third connected device.
  • Up to 3 devices can be paired to the BOOST TV at one time.
  • You can have several source paired, but only one active at the same time.
  • As a stand-alone soundbar, the product can support 5.0.2 channels. When connected to the optional Citation Sub or Citation Sub-S, the product can support 5.1.2 channels.

    It is also possible to have physical rear surround channels by connecting the optional Citation Surround.
     
  • The amount of Chromecast speakers you can stream music to depends on the bandwidth of your local wireless network. Theoretically, an unlimited amount of devices can be connected to stream the same song.
  • Only one device at a time.
  • They support up to 8 paired devices without reset.
  • Our Multi-Connect feature supports up to two devices, to be connected at the same time. But only one device can play at a time.
  • The E15 headphones come with three sizes of ear tips: S, M, L which accommodate most ear sizes.
  • The UA Sport Wireless Flex has size 3 (wingless) and the larger size 5 (winged). It also features three sizes of the small, medium, large inner ear tips. The unit comes with the size 5 Medium in ear tip on the unit out of the box.
  • The Duet Mini headphones come with three ear tip sizes. (Small, Medium, Large)
  • The JBL Live 100 comes with 3 different ear tip sizes (S, M, L)
  • The N20LT features 4 ear tip sizes: X-S, Small, Medium, Large
  • The N40 comes with 4 sizes in the packaging. (XS, S, M, L)
  • The Vi Personal Trainer is pre-fitted with the size small fin and comes with two additional fin sizes. To get accurate ratings on your heart rate, you'll want to find the fin that fits most comfortably. The Vi also comes pre-fitted with the size medium ear tip and comes with four additional tip sizes. (XS, S, M, L)
  • The BDS -75 and -77 models support 2000 files and 10 folder levels on DLNA.
  • Up to four headsets can play simultaneously. For each additional headset, hold the pairing buttons on both transmitter and headset for 5 seconds, then release. Now switch the transmitter off and on again with the pairing button, and the connection is active.
  • The Everest 110 should receive 8 hours of audio playback on a full charge. However, depending on the volume level at which you listen to your music at, this can decrease the battery life faster.
  • You should receive up 10 hours of audio playback. (varies by volume level and audio content)
  • You should expect up to 8 hours of playback time on a fully charged battery.
  • If no fans or Air Conditioning are being used to cool the No. 536 amplifiers there should be 2U rack spaces vertically between No. 536 amplifiers
  • Three devices can be connected to Go + Play BT/Wireless at the same time. You can easily take turns when playing music from 3 connected devices by pressing play on one of them. If you press play on the second of the connected devices, the first one will be interrupted and the second will start playing, and so on. If you want to connect a 4th device, you'll be required to disconnect one of the connected devices first.
  • You can connect 3 smart devices ( iOS or Android ) simultaneously by Bluetooth. One when connecting via AUX cable.
  • You can connect 2 smart devices ( iOS or Android ) simultaneously by Bluetooth. One when connecting via AUX cable.
  • Up to 2 source devices can connected at the same time.
  • You can stream to two speakers simutanouisly with the Connect function.
  • Up to 3 units can connect with the party mode.
  • An OR300 weighs 42 g per earpiece.
  • The speaker uses 4 x 15W when running on battery. You will hear a slight lower bass performance, compared to being connected to AC power.
  • JBL Quantum 400 and ONE are compatible with USB C to A cable to enjoy PS4 console with RGB Lighting on, and Quantum 600 and 800 with wireless-enabled by USB dongle also gives lighting moment on PS4 console games.

    *NOTE that RGB will not light up when connecting with 3.5mm cable to any device (PC, Console, Mobile, etc.) because the cable doesn't have power enough for the RBG lighting.

     

  • The InfinityLAB charger has "smart power distribution" feature, it's smart enough to know how to allocate power, depending on which devices are plugged in.

    Take 65W charger as an example:
    If plug in only 1 USB-C device to this charger, the USB-C port can deliver max. 65W PD fast charging.
    If plug in one USB-C device and one USB-A device simultaneously to this charger, the USB-A port can deliver max.15W fast charging, and the USB-C port can deliver max. 45W PD fast charging.
     
  • Sometimes you need to change settings such as changing EQ to match the content you are watching or adjusting the bass level.
    1. Grab your Remote control.
    2. Press and hold the "HOME" button down, an overlay on the right side of the screen will appear.
    3. This is our quick settings menu.
    4. Go to Settings --> Sound --> Select EQ Mode
    5. Hit the back button Arrow icon a couple of times until you are back at what you are watching.
    With the Quick settings menu, you don't have to stop and leave the app or content you are watching, its very simple, and easy to use!
  • You can adjust the amount of audio coming from the upfiring speakers by pressing the "ATMOS" button on the Remote control and switch between middle (default), high or low.
  • With both detachable surround speakers undocked, you can select the surround sound level by pressing the REAR button on the remote control.
  • In the Google Home app, go to device settings and set up your home address again. The home address is where the Oasis sets its time zone. If changes are made, it may be necessary to reboot the speaker. Remove and reinsert the power cable to ensure that the changes take effect.
     
  • • Always have clear line of sight between your Bluetooth device (speaker, headphones etc.) and source device (Smartphone/tablet/PC etc). Be aware of obstacles in front of your devices.

    • Try to shutdown other products that have Bluetooth, but are not being used. They are often the reason for interference even though they are not being used.

    • Do not stand too close to your Wi-Fi router since a Wi-Fi signal is stronger and in many cases will "overlap" the connection.

    • Be aware of walls around you. Concrete and brick walls will often interrupt the signal, as it cannot pass through such thick walls.

    • Bluetooth signals cannot travel through water, which includes the human body. Make sure with wireless headphones to keep your source device and the receiver on the same side of your body.

    • Open spaces such as parks can cause issues for your devices, as open air is "bad" for any Bluetooth signal if it cannot reflect from objects around you.
< 1 ... 12 13 14 15 16 ... 32 >

Can’t find what you’re looking for?

Call Us

Call Us

Talk to a product expert
Call Us now at: (877) 871-6755

Mon - Fri: 9:00 am - 11:00 pm (ET)
Sat - Sun: 9:00 am - 5:00 pm (ET)

Chat with Us

Chat with Us

Mon - Fri: 9:00 am - 11:00 pm (ET)
Sat - Sun: 9:00 am - 5:00 pm (ET)

message

Text Us

Text with a support agent via SMS at:
628-333-7807

Mon - Fri: 9:00 am - 11:00 pm (ET)
Sat - Sun: 9:00 am - 5:00 pm (ET)