How To
How To
1869 results
-
JBL Quantum 400 and ONE are compatible with USB C to A cable to enjoy PS4 console with RGB Lighting on, and Quantum 600 and 800 with wireless-enabled by USB dongle also gives lighting moment on PS4 console games.
*NOTE that RGB will not light up when connecting with 3.5mm cable to any device (PC, Console, Mobile, etc.) because the cable doesn't have power enough for the RBG lighting.Was this helpful? Thank you for your feedback! -
The speaker uses 4 x 15W when running on battery. You will hear a slight lower bass performance, compared to being connected to AC power.Was this helpful? Thank you for your feedback!
-
An OR300 weighs 42 g per earpiece.Was this helpful? Thank you for your feedback!
-
Up to 3 units can connect with the party mode.Was this helpful? Thank you for your feedback!
-
You can stream to two speakers simutanouisly with the Connect function.Was this helpful? Thank you for your feedback!
-
Up to 2 source devices can connected at the same time.Was this helpful? Thank you for your feedback!
-
You can connect 2 smart devices ( iOS or Android ) simultaneously by Bluetooth. One when connecting via AUX cable.Was this helpful? Thank you for your feedback!
-
You can connect 3 smart devices ( iOS or Android ) simultaneously by Bluetooth. One when connecting via AUX cable.Was this helpful? Thank you for your feedback!
-
Three devices can be connected to Go + Play BT/Wireless at the same time. You can easily take turns when playing music from 3 connected devices by pressing play on one of them. If you press play on the second of the connected devices, the first one will be interrupted and the second will start playing, and so on. If you want to connect a 4th device, you'll be required to disconnect one of the connected devices first.Was this helpful? Thank you for your feedback!
-
If no fans or Air Conditioning are being used to cool the No. 536 amplifiers there should be 2U rack spaces vertically between No. 536 amplifiersWas this helpful? Thank you for your feedback!
-
You should expect up to 8 hours of playback time on a fully charged battery.Was this helpful? Thank you for your feedback!
-
You should receive up 10 hours of audio playback. (varies by volume level and audio content)Was this helpful? Thank you for your feedback!
-
The Everest 110 should receive 8 hours of audio playback on a full charge. However, depending on the volume level at which you listen to your music at, this can decrease the battery life faster.Was this helpful? Thank you for your feedback!
-
Up to four headsets can play simultaneously. For each additional headset, hold the pairing buttons on both transmitter and headset for 5 seconds, then release. Now switch the transmitter off and on again with the pairing button, and the connection is active.Was this helpful? Thank you for your feedback!
-
The BDS -75 and -77 models support 2000 files and 10 folder levels on DLNA.Was this helpful? Thank you for your feedback!
-
The Vi Personal Trainer is pre-fitted with the size small fin and comes with two additional fin sizes. To get accurate ratings on your heart rate, you'll want to find the fin that fits most comfortably. The Vi also comes pre-fitted with the size medium ear tip and comes with four additional tip sizes. (XS, S, M, L)Was this helpful? Thank you for your feedback!
-
The N40 comes with 4 sizes in the packaging. (XS, S, M, L)Was this helpful? Thank you for your feedback!
-
The N20LT features 4 ear tip sizes: X-S, Small, Medium, LargeWas this helpful? Thank you for your feedback!
-
The JBL Live 100 comes with 3 different ear tip sizes (S, M, L)Was this helpful? Thank you for your feedback!
-
The Duet Mini headphones come with three ear tip sizes. (Small, Medium, Large)Was this helpful? Thank you for your feedback!
-
The UA Sport Wireless Flex has size 3 (wingless) and the larger size 5 (winged). It also features three sizes of the small, medium, large inner ear tips. The unit comes with the size 5 Medium in ear tip on the unit out of the box.Was this helpful? Thank you for your feedback!
-
The E15 headphones come with three sizes of ear tips: S, M, L which accommodate most ear sizes.Was this helpful? Thank you for your feedback!
-
Our Multi-Connect feature supports up to two devices, to be connected at the same time. But only one device can play at a time.Was this helpful? Thank you for your feedback!
-
They support up to 8 paired devices without reset.Was this helpful? Thank you for your feedback!
-
Only one device at a time.Was this helpful? Thank you for your feedback!
-
The amount of Chromecast speakers you can stream music to depends on the bandwidth of your local wireless network. Theoretically, an unlimited amount of devices can be connected to stream the same song.Was this helpful? Thank you for your feedback!
-
As a stand-alone soundbar, the product can support 5.0.2 channels. When connected to the optional Citation Sub or Citation Sub-S, the product can support 5.1.2 channels.
It is also possible to have physical rear surround channels by connecting the optional Citation Surround.
Was this helpful? Thank you for your feedback! -
You can have several source paired, but only one active at the same time.Was this helpful? Thank you for your feedback!
-
Up to 3 devices can be paired to the BOOST TV at one time.Was this helpful? Thank you for your feedback!
-
All three devices supports up to 3 Bluetooth connections at the same time. However, only one can play music while connected, if one of the other paired devices starts playback, it will interrupt the music that is currently playing, and begin playing from the second or third connected device.Was this helpful? Thank you for your feedback!
-
You can have two connectecd devices at the same time.Was this helpful? Thank you for your feedback!
-
AURA Studio has the Multi-Connect feature (Social-Mode) which allows you to connect up to 2 devices at the same time and play different music from either device. Note that the music playing on one device will be interrupted when the other device begins playing music, and vice-versa.Was this helpful? Thank you for your feedback!
-
You can have 3 smart devices connected at the same time and by pressing play on either one of the sources (smart devices) will start streaming music. The speaker can remember up to 8 paired smart devices and when this buffer is full it will release the first added device in connected sequences. Resetting the speaker will also clear this buffer.Was this helpful? Thank you for your feedback!
-
If your OMNI 50+ is completely drained, it will take 3,5 to 4 hours to fully charge. We advise to charge the Omni 50+ when it starts to blink red.Was this helpful? Thank you for your feedback!
-
The cable is approximately 125 cm long.Was this helpful? Thank you for your feedback!
-
The memory is based on flash memory, and is not forgotten.Was this helpful? Thank you for your feedback!
-
Any conversation or search history is stored in the cloud via your Google account and is saved until you choose to delete it. JBL LINK speakers do not keep or store any data locally.Was this helpful? Thank you for your feedback!
-
The surround speaker takes up to 4 hours to fully charge.Was this helpful? Thank you for your feedback!
-
Approximately 2.5 hours. This depends on the actual charger used, and its capacity in Amperes.Was this helpful? Thank you for your feedback!
-
You can listen up to 8 hours of MP3 music, with a fully charged battery, depending on volume and type of musicWas this helpful? Thank you for your feedback!
-
When docked and connected to the harness, the BASSPRO GO can be used as a powered subwoofer or a full-range car audio speaker. It receives it’s audio source from the head unit via the wiring harness and it’s power from the car battery. Bluetooth is not active.
When undocked/portable and removed from the harness, it can no longer be used as a powered sub. It is strictly a full-range portable Bluetooth speaker system. It receives it’s audio source from the Bluetooth input only, and receives it’s power from the internal battery.
Was this helpful? Thank you for your feedback! -
For headphones with Version 4.0 of the Firmware, the first update will be done via USB cable, and after the first update, all subsequent updates will be delivered over the air. For headsets with version 5.0 of the firmware, all updates will be delivered over the air, via the appWas this helpful? Thank you for your feedback!
-
Unplug the power cord from soundbar. While holding down the VOLUME + button, plug the power cord into the soundbar. A green LED, followed by a blue LED will light up, after which the soundbar will go into standby. The SB150 is now reset.Was this helpful? Thank you for your feedback!
-
When playing music: one click is Pause or Play. Two clicks skips to next track. Three clicks skips back to start of track or previous track. At all times, hold the button to start voice-activated phone functions. For telephone use: one click to accept a call, two clicks to end the call.Was this helpful? Thank you for your feedback!
-
The Onyx Studio 9 plays songs based on the order of the date that the music is added to the USB stick.
Was this helpful? Thank you for your feedback! -
For the owner, two indications show the difference: 1. In the menu system, a Spotify option is available as one of the tiles. 2. A check of the software version will show 3.16.0 or higher. There is no mention of the Spotify option on the BDS unit itself. For customer service, a serial number check will show the precise model.Was this helpful? Thank you for your feedback!
-
By pressing and holding the Bluetooth and the Volume PLUS buttons at the same time. The software version is shown in the display.Was this helpful? Thank you for your feedback!
-
With the table stand, Sabre 35 is 125 mm high and 55 mm deep.Was this helpful? Thank you for your feedback!
-
Because the Right Ear cup is a touch sensor, you simply have to move your finger from top to bottom on the outside ear cup to increase the volume. In order to decrease the volume, move your finger from the bottom of the ear cup to the top.Was this helpful? Thank you for your feedback!
-
The DUET NC noise cancellation button is located on the bottom Right ear cup. To turn the Active Noise Cancellation on, press and hold the button (Located next to the Bluetooth button) for 2-3 seconds or until you hear the confirmation audio tone. To turn off the noise cancellation, press and hold for 2 seconds or until you hear the audio tone powering off. A white LED next to the button lights up when NC is on.Was this helpful? Thank you for your feedback!
-
The E65BTNC noise cancellation button is located on the bottom Right ear cup. To turn the Active Noise Cancellation on, press and hold the button (Located next to the Bluetooth button) for 2-3 seconds or until you hear the confirmation audio tone. To turn off the noise cancellation, press and hold for 2 seconds or until you hear the audio tone powering off. A white LED next to the button lights up when NC is on.Was this helpful? Thank you for your feedback!
-
On the back of the inline microphone you will see the letter A (Android) and i (IOS devices) and a switch option to choose between the two.Was this helpful? Thank you for your feedback!
-
Tap and hold the left earpiece for 2 secondsWas this helpful? Thank you for your feedback!
-
Press and hold the RIGHT center button for 1-2 seconds.Was this helpful? Thank you for your feedback!
-
If you want to skip your track forward, simply press and hold the top button on the inline microphone. If you want to skip the track backward, press and hold the bottom button until you hear the track skip backward. You typically hold the button for 1-2 seconds to advance to the next track or to go backwards.Was this helpful? Thank you for your feedback!
-
Locate the power button on the back of the right ear cup. Gently slide the spring loaded power button up for 2-3 seconds and release. Once turned on, it will display a solid white light. If this is your first time powering on the device it should automatically go into pairing mode, and will display a fast blinking blue light. Make sure the device you are attempting to connect to is in search mode. The headphones should pop up on your list of discoverable devices within 3-5 seconds, and connect. Once connected, you will see a solid blue light above the power button.Was this helpful? Thank you for your feedback!
-
The Reflect Contour BT lets you skip the tracks forward, by pressing and holding the volume up button for 3 seconds and skip tracks backward, by pressing and holding the volume down button for 3 seconds.Was this helpful? Thank you for your feedback!
-
The REFLECT MINI BT lets you skip the tracks forward, by pressing and holding the volume up button for 3 seconds and skip tracks backward, by pressing and holding the volume down button for 3 seconds.Was this helpful? Thank you for your feedback!
-
The track control button is located in the center of the inline microphone in between the volume control. This also serves as the pause/play button and enables you to answer and hang up phone calls. Two quick clicks on the center button will skip the tracks forward to the next song. Multiple quick clicks will skip the tracks backward.Was this helpful? Thank you for your feedback!
-
Switch device ON.
Press and hold VOLUME+ and PLAY/PAUSE buttons until all lamps light up.
Device is now reset.Was this helpful? Thank you for your feedback!
Can’t find what you’re looking for?
Call Us
Talk to a product expert
Call Us now at:
(877) 871-6755
Mon - Fri: 9:00 am - 11:00 pm (ET)
Sat - Sun: 9:00 am - 5:00 pm (ET)
Chat with Us
Mon - Fri: 9:00 am - 11:00 pm (ET)
Sat - Sun: 9:00 am - 5:00 pm (ET)
Text Us
Text with a support agent via SMS at:
628-333-7807
Mon - Fri: 9:00 am - 11:00 pm (ET)
Sat - Sun: 9:00 am - 5:00 pm (ET)